CVE Database

In the Linux kernel, the following vulnerability has been resolved: md: do overflow check for sb->bblog_shift in super_1_load() In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on- disk superblock. It is used for badblocks API badblocks_set() by the following sequence, 1930 rdev->badblocks.shift = sb->bblog_shift; 1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) { 1932 u64 bb = le64_to_cpu(*bbp); 1933 int count = bb & (0x3ff); 1934 u64 sector = bb >> 10; 1935 sector <<= sb->bblog_shift; 1936 count <<= sb->bblog_shift; 1937 if (bb + 1 == 0) 1938 break; 1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1)) 1940 return -EINVAL; 1941 } bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for an invalid bb->bblog_shit, it is possible to make sector be overflowed by the following calculation, 1935 sector <<= sb->bblog_shift; Then in turn when call badblocks_set() at line 1939 with the invalid rdev->badblocks.shift set at line 1930, may result an overflow inside _badblocks_clear() in block/badblocks.c. Although there are many places to call badblocks APIs, the non-zero shift value is only used in super_1_load(), other places always use 0 as the shift value. Therefore it is unnecessary to do a general shift value overflow check inside badblock API, and just check here as the caller. This may avoid unnecessary check, make the badblocks API code more simple and elegant.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix uninitialized local_id in syncookie MP_JOIN reconstruction mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce, backup, join_id, token and msk from the saved cookie entry when rebuilding the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it does not restore local_id, even though the SYN path saved it. subflow_ulp_clone() then reads that uninitialized field and stores it as the joined subflow's address-ID. Because the request-sock slab is SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale byte of a previously freed request socket, which an off-path peer can influence by sending concurrent MP_JOIN SYNs. This corrupts the path manager's id-based subflow bookkeeping for the connection. Restore subflow_req->local_id from the cookie entry, as done for the other fields.

In the Linux kernel, the following vulnerability has been resolved: nouveau/gem: reserve the bo in the info ioctl around the vma lookup In the non-uvmm path, there could be a race between the info lookup finding the vma, and the gem close path closing the vma leading to a use-after-free. Spotted with the help of Opus 4.6.

In the Linux kernel, the following vulnerability has been resolved: sunrpc: route to a populated pool in svc_pool_for_cpu() svc_set_num_threads() spreads the requested threads evenly across the service's pools (base = nrservs / sv_nrpools). When a service runs fewer threads than it has pools -- e.g. an nfsd configured with fewer threads than the host has NUMA nodes while running in "pernode" or "percpu" mode -- the trailing pools are left with no threads at all. svc_xprt_enqueue() selects a pool from the CPU servicing the transport, queues the transport on that pool's sp_xprts, and only wakes a thread from the same pool. Each thread services exclusively its own pool, so a transport that lands on a threadless pool is enqueued on sp_xprts and never picked up: the connection hangs indefinitely. Have svc_pool_for_cpu() skip pools that currently have no threads, falling back to the next populated pool. This trades NUMA locality for a guarantee that the work is actually serviced. sp_nrthreads is only updated under the service mutex; the lockless read here is a best-effort routing hint, so annotate it with data_race().

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: always drain cache_cleaner before destroying a cache_detail sunrpc_destroy_cache_detail() only cancels the global cache_cleaner delayed_work when cache_list is empty. During per-netns teardown cache_list is never empty because init_net's caches remain registered, so the cancel never fires. After unlink, the caller proceeds to cache_destroy_net() which kfrees the cache_detail while cache_clean() may still hold a dangling pointer to it. The result is a use-after-free: cache_dequeue() takes cd->queue_lock on freed memory, and cache_put() dereferences cd->cache_put as a function pointer from freed slab. Drop the list_empty guard so that cancel_delayed_work_sync() always runs, ensuring any in-flight cache_clean() completes before the cache_detail is freed. Re-arm the cleaner afterwards if other caches are still registered.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Check svc pool percpu counter allocation __svc_create() initializes three per-pool percpu_counter stats and ignores every return value. On SMP, percpu_counter_init() fails when __alloc_percpu_gfp() cannot satisfy the allocation, leaving the failed counter with fbc->counters == NULL and its embedded raw_spinlock_t, list_head, and count never initialized. __svc_create() returns the half-constructed svc_serv to nfsd, lockd, or the NFS callback service anyway. Once that service is live, the hot-path increments in svc_xprt_enqueue(), svc_handle_xprt(), and svc_pool_wake_idle_thread() reach a counter whose backing pointer is NULL. The pointer is a per-cpu offset, so the access does not fault: it resolves to offset zero of the current CPU's per-cpu area and silently corrupts whatever variable lives there. A /proc/fs/nfsd/pool_stats read walks the same NULL per-cpu storage and returns garbage, and on CONFIG_DEBUG_SPINLOCK or lockdep it splats on the never-initialized lock. Creating the broken service requires a percpu allocation failure during RPC server startup, so it is reachable only by a local administrator under memory pressure or fault injection; a remote peer cannot induce the bad state on its own. Check each percpu_counter_init() return value in __svc_create() and fail when an allocation fails, unwinding the counters already set up in the current pool and in every pool initialized before it. A discrete percpu_counter_destroy() per counter at teardown frees each per-cpu allocation exactly once.

In the Linux kernel, the following vulnerability has been resolved: sunrpc: defer rq_argp and rq_resp free until after RCU grace period svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously via kfree(), but defers the rqstp struct free via kfree_rcu(). After svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is a window where RCU readers that started before list_del_rcu() can still traverse the thread list and find the rqstp. These readers (e.g. nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has already been freed — a use-after-free. Fix this by moving the kfree of rq_argp and rq_resp into an explicit call_rcu() callback alongside the struct free. Resources not accessed by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain synchronously freed.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gssx_dec_option_array error path bugs Four coupled defects in the gssx XDR option-array decoder make the error paths unsafe: a NULL deref in the caller, a refcount leak on the decoded group_info, and a latent use-after-free that the leak fix would otherwise expose. gssx_dec_option_array() sets oa->count = 1 before allocating oa->data. If that allocation fails, -ENOMEM is returned with oa->count == 1 and oa->data == NULL. All other error paths jump to free_oa: which frees oa->data and NULLs it but also leaves oa->count == 1. The caller trusts the count: gssp_accept_sec_context_upcall() gssx_dec_accept_sec_context() gssx_dec_option_array() /* fails, count=1 data=NULL */ data = res.options.data[0].value /* NULL deref */ Independently, free_creds: releases the partially decoded svc_cred with a bare kfree(creds). gssx_dec_linux_creds() installs a groups_alloc() result into creds->cr_group_info; that object is kvmalloc-backed and refcounted, and only put_group_info() reaches kvfree(). A plain kfree(creds) drops the wrapper and leaks the group_info allocation. The natural fix for the leak is to call free_svc_cred(creds) before kfree(creds), but free_svc_cred() invokes put_group_info() on creds->cr_group_info unconditionally when non-NULL. The existing out_free_groups: path in gssx_dec_linux_creds() already called groups_free() on that pointer without clearing it, so once free_svc_cred() is wired in, the subsequent put_group_info() would touch freed memory. Fix all four together: - Move the oa->count = 1 assignment below the oa->data allocation so it is never set when oa->data is NULL. - Reset oa->count to 0 at free_oa: so count and data stay coherent and the caller sees an empty option array. - Call free_svc_cred(creds) before kfree(creds) at free_creds: so the refcounted cr_group_info is released. free_svc_cred() either NULL-guards each field explicitly (cr_group_info has an if() check) or delegates to a helper that is NULL-safe itself (kfree for the string fields, gss_mech_put() which guards with if(gm) at gss_mech_switch.c:342), so it is safe to call on a partially decoded svc_cred where only cr_uid/cr_gid/cr_group_info have been written and everything else is zero from kzalloc. - In gssx_dec_linux_creds()'s out_free_groups: path, release cr_group_info with put_group_info() rather than groups_free() so the teardown matches free_svc_cred()'s refcount-aware path, and clear the pointer so a later free_svc_cred() on the same creds does not release it a second time.

In the Linux kernel, the following vulnerability has been resolved: sunrpc: init gssp_lock before publishing proc entry create_use_gss_proxy_proc_entry() publishes /proc/net/rpc/use-gss-proxy via proc_create_data() before init_gssp_clnt() runs mutex_init() on sn->gssp_lock. Once the dentry is linked under proc_subdir_lock it is immediately reachable from userspace, so a write that lands in the window drives set_gssp_clnt() into mutex_lock() on a zero-initialized struct mutex. create_use_gss_proxy_proc_entry(net) proc_create_data("use-gss-proxy", ...) /* dentry live */ init_gssp_clnt(sn) mutex_init(&sn->gssp_lock) /* too late */ write_gssp() set_gssp_clnt(net) mutex_lock(&sn->gssp_lock) /* uninitialized */ gssp_rpc_create(...) sn->gssp_clnt = clnt mutex_unlock(&sn->gssp_lock) The window spans only the two statements between proc_create_data() returning and init_gssp_clnt(), so a writer reaches it only if the registering thread is preempted there while another task is already opening the freshly published file. register_pernet_subsys() runs in preemptible context under pernet_ops_rwsem, so that preemption is possible, and the window widens on auth_rpcgss module load, when the proc entry is created for every live net namespace whose tasks are already running. A writer that wins the race locks a zero-filled struct mutex. On CONFIG_DEBUG_MUTEXES the missing magic value trips a "lock used without init" splat; on a production kernel the fast path acquires the lock via CMPXCHG(owner, 0, current). In the latter case a second writer that arrives before init_gssp_clnt() re-zeroes owner can enter set_gssp_clnt() concurrently, shut down the first writer's clnt while it is still in use, and leak the loser's clnt. Fix by initializing sn->gssp_lock in sunrpc_init_net() so its lifetime matches the sunrpc_net it lives in. sn->gssp_clnt is already NULL from the kzalloc that backs net_generic storage, so the lazy helper is no longer needed; drop init_gssp_clnt(), its prototype, and the call from create_use_gss_proxy_proc_entry(). sunrpc.ko is a build-time dependency of auth_rpcgss.ko, so sunrpc_init_net() has always run on every netns before any auth_gss pernet init can publish the proc entry.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id svc_rdma_free() caches rdma->sc_cm_id->device before teardown, then calls rdma_destroy_id(sc_cm_id) which frees the cm_id. rpcrdma_rn_unregister() follows, but between those two calls the transport's sc_rn entry is still installed in the device's rd_xa. A concurrent ib_unregister_device walk can dispatch svc_rdma_xprt_done() against the now-freed sc_cm_id. Move rpcrdma_rn_unregister() before rdma_destroy_id() so the transport's notification entry is removed from the xarray before the cm_id it references is destroyed. Also guard the sc_cm_id dereference with a NULL check: the following patches introduce paths that reach svc_rdma_free() with sc_cm_id == NULL (listener create failure, ADDR_CHANGE replacement failure).

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE, it creates a replacement listener cm_id and returns 1, telling the CM core to destroy the old one. If the replacement allocation fails, sc_cm_id still points at the old cm_id that the CM core is about to destroy. Any subsequent dereference of sc_cm_id -- such as svc_rdma_detach()'s rdma_disconnect() call -- is a use-after-free. NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s rdma_disconnect() call against NULL so that the listener can be torn down safely when the server shuts down.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Read lists that exceed the page budget Individual Read segment lengths are validated at decode time, but nothing prevents a requester from sending multiple segments whose cumulative length exceeds the rq_pages array budget. When one segment fills the page array exactly, the runtime guard in svc_rdma_build_read_segment() is bypassed because len reaches zero. A subsequent segment then accesses the NULL sentinel slot at rq_pages[rq_maxpages], resulting in a NULL pointer dereference during DMA mapping. Accumulate pages across all Read segments and reject the message at decode time when the total would overflow the page budget.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx() bounds the declared lengths from above (their sum must fit the received event), but an assoc request/response shorter than its fixed offset still underflows here: the u8 wraps to ~250, and cfg80211_connect_result() / cfg80211_roamed() then treat that wrapped value as the IE length and copy that many bytes out of the small assoc_info buffer to user space via nl80211, disclosing adjacent slab memory. Clamp both lengths to their offsets before subtracting. Found by 0sec (https://0sec.ai) using automated source analysis; the missing lower bound is evident from source. Compile-tested.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel pending mlo_pm_work If the device is reset, suspended or unregistered within that window, the pending work can still run and access vif/bss data that may already be freed, or send MCU commands while the firmware is not available. Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown and suspend paths: - mt7925_mac_reset_work() (chip reset recovery) - mt7925e_unregister_device() (PCIe unbind) - mt7925_pci_suspend() (PCIe bus suspend) - mt7925_suspend() (mac80211 suspend) - mt7925u_suspend() (USB bus / runtime suspend) This ensures the work is stopped before the device state becomes invalid.

In the Linux kernel, the following vulnerability has been resolved: media: staging/ipu7: fix async notifier UAF on probe error path isys_register_devices() registers the V4L2 async notifier via isys_notifier_init(). If a subsequent probe step such as isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label which only calls isys_unregister_devices(). That helper tears down the video devices, subdevices, V4L2 device and media device, but never unregisters or cleans up the async notifier. As a result the notifier stays chained in the global notifier_list while the enclosing struct ipu7_isys is freed by devres, leading to list corruption and a use-after-free the next time the list is walked. The remove path already does the right thing by calling isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on the probe error path so the notifier is unregistered and cleaned up before the device is torn down.

In the Linux kernel, the following vulnerability has been resolved: sched/core: Handle pick_task() releasing the rq lock Core scheduling's pick_next_task() breaks when a ->pick_task() implementation can release the rq lock. The selection state derived on entry is only valid while the lock is held continuously. Once a pick can drop the lock, an interleaving selection can invalidate all of it: the single-CPU fast path can commit an uncookied pick although the core went cookied during the release, and forceidle committed by the interleaving selection skews the restarted pass's accounting. Fix it by restarting the whole selection when a pick returns RETRY_TASK after releasing the lock: a single restart point above the state derivation replaces the per-loop restart labels, so a retry picks up state committed by interleaving selections and accounts and resets forceidle like a fresh selection would. need_sync and fi_before latch across retries. Clock validity can't be re-derived - there is no program-ordered way to tell whether the own and core rq clocks are still updated after the lock was released, as other lockers' pin cycles may or may not have invalidated them. When restarting, clear core_clock_updated so that the sibling loop re-updates the core rq, and update the own rq clock if invalidated.

In the Linux kernel, the following vulnerability has been resolved: sched/core: Make core-sched flips wait for in-flight selections Core scheduling's pick_next_task() operates on all sibling rqs under one acquisition of the shared core-wide lock. A ->pick_task() that releases the rq lock leaves every sibling __lock momentarily free, letting __sched_core_flip(false) complete mid-selection and rebind rq_lockp() under it. The selection resumes on the split locks, touching sibling state it no longer protects, and __schedule() finally releases a lock that was never taken while leaking the one that was. Count in-flight core-wide selections in the leader's rq->core_pick_in_flight and make __sched_core_flip() wait for the count to drain. The count only changes under the shared lock, which the flip holds while sampling, so no other ordering is needed. The wait can repeat while selections overlap, but the flip backs off between samples and flips are rare cookie-lifetime events. sched_core_cpu_deactivate() moves the count to the new leader - a stale copy left behind would bias it forever if that CPU later returns as its own leader.

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Fix PMU event info array size overflow SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo) in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010 truncate to 16. KVM then allocates one entry but loops over the original num_events, causing out-of-bounds reads and writes. A nested guest triggered: BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 Read of size 4 at addr ff600000074d46b0 by task init/1 Call Trace: [<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 [<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268 [<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 [<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540 [<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80 Allocated by task 1: __kmalloc_noprof+0x19e/0x4b0 kvm_riscv_vcpu_pmu_event_info+0x72/0x142 kvm_sbi_ext_pmu_handler+0xca/0x268 kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 kvm_riscv_vcpu_exit+0x48c/0x540 kvm_arch_vcpu_ioctl_run+0x37e/0xc80 The buggy address is located 0 bytes to the right of allocated 16-byte region [ff600000074d46a0, ff600000074d46b0) Store the shared-memory size in size_t and reject multiplication overflow. Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings. Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index to match num_events.

In the Linux kernel, the following vulnerability has been resolved: qede: Fix NULL pointer dereference in TPA fragment processing Under memory pressure, the qede driver encounters NULL pointer dereferences when processing TPA continuation fragments. Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally dropped the assignment of tpa_info->buffer.data in qede_tpa_start(). When memory pressure causes an SKB allocation failure in qede_tpa_start(), the driver sets tpa_start_fail = true and attempts to recycle the physical page later in qede_tpa_end() via qede_reuse_page(). However, because buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a "ghost" BD (valid DMA mapping but NULL data pointer) back into the active Rx ring. The next time the hardware uses this ring slot, it passes a NULL page to qede_fill_frag_skb(), causing a kernel panic. Example crash from production system: BUG: unable to handle kernel NULL pointer dereference at 0x8 RIP: qede_fill_frag_skb+0x96/0x430 [qede] Call Trace: qede_rx_int+0xb06/0x1de0 qede_poll+0x2f4/0x6c0 __napi_poll+0x2d/0x130 Fix the root cause by restoring the tpa_info->buffer.data assignment in qede_tpa_start(), ensuring valid pages are correctly tracked and recycled. Additionally, update the stale comment for struct qede_agg_info::buffer to reflect its current usage.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Cancel reg_work before freeing device on remove c4iw_uld_state_change() queues reg_work to register the RDMA device. c4iw_remove() can free ctx->dev while this work is pending or running, leaving c4iw_register_device() accessing the freed device. Cancel reg_work before removing the device. The registration work can tear down ctx->dev when registration fails, so do not unregister or deallocate it again in that case. This issue was found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_set_ib_path() ucma_set_ib_path() calls ucma_event_handler() straight from the write() path, without the handler lock that keeps ctx->file stable while a uevent is queued. The handler re-reads ctx->file for every dereference: mutex_lock(&ctx->file->mut); /* file A */ list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */ mutex_unlock(&ctx->file->mut); /* file B */ wake_up_interruptible(&ctx->file->poll_wait); /* file B */ A concurrent ucma_migrate_id() reassigns ctx->file while the SET_OPTION caller sleeps in mutex_lock(), so the list_add_tail() lands on file B's event_list while only file A's mutex is held, racing every other user of that list: BUG: KASAN: slab-use-after-free in __list_add_valid_or_report+0x1aa/0x1c0 Read of size 8 at addr ffff888153c6a418 by task poc_corr/486 Call Trace: __list_add_valid_or_report+0x1aa/0x1c0 ucma_event_handler+0x1be/0xc00 ucma_set_ib_path+0x45e/0x710 ucma_set_option+0x32e/0x590 ucma_write+0x1f9/0x330 Allocated by task 505: ucma_write_cm_event+0x1a1/0x660 Freed by task 505: kfree+0x1da/0x4c0 ucma_get_event+0x5d5/0x7e0 The freed object is a ucma_event that another thread dequeued from file B's list under file B's mutex. File A's mut is left held on top of that, wedging its next writer in uninterruptible sleep. This path needs a bound and address-resolved cm_id, so it requires an RDMA device to be present. Take the handler lock around the call.

In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_write_cm_event() ctx->file may only be changed under the handler lock and the xa_lock, which is what stops uevents being queued for a ctx while ucma_migrate_id() moves it to another file. The CM core takes that lock before invoking ucma_event_handler(), but the write() paths that queue uevents themselves do not. ucma_write_cm_event() re-reads ctx->file for each of its four dereferences, so ucma_migrate_id() can swap it mid-sequence: mutex_lock(&ctx->file->mut); /* file A */ list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */ mutex_unlock(&ctx->file->mut); /* file B */ wake_up_interruptible(&ctx->file->poll_wait); /* file B */ The window is the mutex_lock() itself: the writer sleeps in it while the migration reassigns ctx->file. The list_add_tail() then runs on file B's event_list holding only file A's mutex: list_add corruption. prev->next should be next (ffff888101320f30), but was ffff88814a08c418. (prev=ffff88814a075c18). kernel BUG at lib/list_debug.c:32! Call Trace: ucma_write_cm_event+0x36e/0x5e0 and file A's mut is left held forever, wedging its next writer in D state. The uevent is also stranded on a list ucma_cleanup_ctx_events() will not walk, so it outlives its context. /dev/infiniband/rdma_cm is 0666 and no RDMA device is involved, so an unprivileged user reaches all of this. Take the handler lock, as ucma_cleanup_mc_events() does; ctx->cm_id is pinned by the ucma_get_ctx() reference.

In the Linux kernel, the following vulnerability has been resolved: regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a reference on np, which is then assigned to pdev->dev.of_node. The function immediately calls of_node_put(np), releasing the reference and leaving pdev->dev.of_node as a dangling pointer. Remove the of_node_put(np) call to let the device hold the reference.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page() ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set, it can allocate a reader page with an outdated order. This isn't a big issue, the user can still re-allocate a new reader page and try again. However, what is more problematic is if the value of subbuf_order changes in the middle of ring_buffer_alloc_read_page(). In that case, bpage->order might not match the actual allocated memory. Use bpage->order for the allocation to prevent this race.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Hold cpu_buffer::lock when resizing a subbuf Because, ring_buffer_subbuf_order_set() can clear cpu_buffer->free_page, hold cpu_buffer->lock to prevent races with ring_buffer_alloc_read_page() and ring_buffer_free_read_page().

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page Discarding a cached reader page after a concurrent ring buffer resize uses the new global subbuf_order for the free_pages() call. This mismatched order may crashes the kernel or leaks memory because the cached page was allocated under the old size. Save the actual free_page order alongside the page address to ensure we always refer to the correct value and do not rely on the potentially stalled cpu_buffer->subbuf_order value. The simplest is to make free_page a buffer_data_read_page which already covers exactly what we need: a page address and a page order.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Stop remote reader update when page swap fails The remote swap_reader_page callback can return -EBUSY when the writer moves the head before the remote catches it, particularly during an event storm on a small buffer. __rb_get_reader_page_from_remote() currently warns about that failure but continues with the unchanged reader ID and rearranges the local page list as though the swap succeeded. Handle the callback failure as a recoverable error. Report it with pr_warn_ratelimited() and return NULL. Callers already handle a NULL reader page as a failed attempt. This avoids splicing the same page as both the previous and new reader without flooding the log under contention.

In the Linux kernel, the following vulnerability has been resolved: orangefs: skip leading spaces before parsing client debug masks orangefs_prepare_cdm_array() sizes each client debug keyword buffer with strcspn(cds_head, " "), but then parses the keyword with %s. The %s conversion skips leading whitespace, while strcspn() does not. If a client debug entry starts with a space, the allocation can be sized for an empty keyword while sscanf() copies the following non-empty token. This can write past the end of the allocated keyword buffer. Skip leading spaces before computing the keyword length so the allocation matches the string parsed by sscanf().

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate rl_used against rl_count in refcount block validator ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array with: for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) { rec = &rb->rf_records.rl_recs[i]; ... rl_recs[] lives in a single metadata block (4096 bytes on the common configuration), so its real capacity is fixed by ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the 16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly off disk by ocfs2_validate_refcount_block() and are never checked against that capacity, nor against each other, before any refcount/reflink/CoW operation walks the array. A crafted (or corrupted) refcount block with rl_used == 0xffff makes the loop above walk far past the end of the block, dereferencing rl_recs[i] for i up to 65534. The resulting index is then handed to the sibling ocfs2_insert_refcount_rec(), whose insert-shift does: if (index < le16_to_cpu(rf_list->rl_used)) memmove(&rf_list->rl_recs[index + 1], &rf_list->rl_recs[index], (le16_to_cpu(rf_list->rl_used) - index) * sizeof(struct ocfs2_refcount_rec)); i.e. a memmove() of up to (0xffff - index) * 16 bytes (~1 MiB) from an offset already past the block. This is reachable from an ordinary reflink (FICLONE) against a crafted/corrupted ocfs2 image: attaching an extent whose cpos sorts past every real record in the leaf forces the lookup to run off the end instead of returning early on a match. The attacker model is local: CAP_SYS_ADMIN mounting a crafted or corrupted ocfs2 image, or a raw write to the block device backing an already-mounted ocfs2 filesystem. ocfs2_validate_refcount_block() already validates the block's ECC, signature, rf_blkno and rf_fs_generation, but never rl_count/rl_used against the block's actual on-disk capacity. This is the same class of gap that ocfs2_validate_extent_block() (fs/ocfs2/alloc.c) already closes for the sibling extent-list header, which checks both the record capacity and the "used" bound before any code walks h_list.l_recs[]: if (le16_to_cpu(eb->h_list.l_count) != ocfs2_extent_recs_per_eb(sb)) { rc = ocfs2_error(...); goto bail; } if (le16_to_cpu(eb->h_list.l_next_free_rec) > le16_to_cpu(eb->h_list.l_count)) { rc = ocfs2_error(...); goto bail; } Add the equivalent pair of checks to ocfs2_validate_refcount_block(): reject a refcount block whose rl_count does not match the fixed per-block capacity returned by ocfs2_refcount_recs_per_rb(), and reject rl_used > rl_count. Both checks are skipped when OCFS2_REFCOUNT_TREE_FL is set, because in that case the same union bytes hold an ocfs2_extent_list (rf_list), not the refcount record list (rf_records) -- that layout is already validated separately by ocfs2_validate_extent_block() when the referenced extent block is read. This mirrors the existing "!(rb->rf_flags & OCFS2_REFCOUNT_TREE_FL)" guard used elsewhere in this file (e.g. ocfs2_get_refcount_rec()) to decide whether rf_records or rf_list is the live member of the union. With this in place, a forged rl_used/rl_count is caught at block validation time (ocfs2_error()), consistent with every other corruption check in this function, instead of driving an out-of-bounds read in ocfs2_find_refcount_rec_in_rl() and a subsequent out-of-bounds memmove() in ocfs2_insert_refcount_rec(). Verified against a crafted image on a v6.19 KASAN (KASAN_GENERIC) build: replaying the same reflink (FICLONE) reliably hit a KASAN report in __ocfs2_increase_refcount()/ocfs2_insert_refcount_rec() before this patch, and triggers no report once ocfs2_validate_refcount_block() rejects the forged rl_used/rl_count.

In the Linux kernel, the following vulnerability has been resolved: openrisc: fix arbitrary kernel memory access via or1k_atomic syscall sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user pointers, v1 and v2, and swaps the words they point to in hand-written assembly. l.lwz r29,0(r4) l.lwz r27,0(r5) l.sw 0(r4),r27 l.sw 0(r5),r29 The pointers are not checked with access_ok(). The four memory accesses also have no exception table entries. A caller passes a kernel address as either pointer, and the syscall reads from and writes to it directly. This gives an unprivileged process a kernel read/write primitive. It overwrites kernel data such as the sys_call_table, gaining code execution in kernel context. Check both pointers before entering the critical section. Add fixups for the four memory accesses so faults on valid but unmapped user addresses return -EFAULT. [shorne@gmail.com: fix comment style]