CVE Database

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix refcount race between list:set GC and swap __ip_set_put_byindex() resolved the index to a set pointer under RCU, then took ip_set_ref_lock in __ip_set_put() to decrement set->ref. ip_set_swap() holds that same lock while swapping both the ip_set_list slots and the two sets' ref counters, so it can interleave between the dereference and the lock acquisition, leaving the caller to decrement a set whose reference already moved to the other index and hit BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq, which the nfnl mutex does not serialize against swap: an expiring list:set member calls list_set_del() -> ip_set_put_byindex() while IPSET_CMD_SWAP runs on the referenced sets. Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap() already does, keeping the refcount tied to the index rather than to a stale set pointer. kernel BUG at net/netfilter/ipset/ip_set_core.c:685! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870) Call Trace: <IRQ> list_set_del (net/netfilter/ipset/ip_set_list_set.c:159) set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181) list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578) call_timer_fn (kernel/time/timer.c:1748) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374) run_timer_softirq (kernel/time/timer.c:2405) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: ipvs: revalidate ihl to prevent out-of-bounds access While the outer IP header is already pulled into the skb head, we must be careful and revalidate the embedded headers after reading them from the skb frags to prevent out-of-bounds access. One such place reported by Sashiko is ip_vs_nat_icmp() where local process can change the ihl field and after skb_ensure_writable() we can see larger value which is a problem for the ip_send_check(cih) calls. Add check to drop the packet if the ihl field is changed.

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: avoid deadlock when canceling IRQ affinity notifier Unregistering IRQ affinity notifiers waits for the callback synchronously. bnxt takes the netdev instance lock in the notifier (to restart the queue) and cancels the work under the same lock. This may obviously deadlock. Move the restart to the async service task. The queue restart isn't super time sensitive. Store the new TPH tag, schedule the task. Safely canceling the service task is already ironed out. In bnxt_request_irq() the order of registering notifier, affinity and initial TPH programming has to be inverted. I think it was racy previously since user may trigger an update as soon as notifier is installed. There's a small known gap - if pcie_tph_get_cpu_st() fails at init and the target tag is 0 we may miss programming the entry. This does not seem worth fixing, the code has skip-on-failure all over the place, anyway.

In the Linux kernel, the following vulnerability has been resolved: veth: fix queue index used to wake the peer txq in veth_poll veth_poll() derives the index of the peer TX queue to wake from rq->xdp_rxq.queue_index. That field is only initialized by xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an XDP program is attached. On the plain GRO/NAPI path (veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so queue_index stays 0 for every queue, as priv->rq is zero-allocated. So in a multi-queue setup with GRO enabled and no XDP program attached, every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing ever wakes it again: the poller draining queue 1 wakes queue 0 instead. veth implements no ndo_tx_timeout, so the netdev watchdog does not kick in either, and the queue stays stopped indefinitely. Derive the index from the position of the rq within priv->rq instead, which is correct regardless of whether XDP was ever enabled. Scripts to reproduce the stall are available at https://github.com/netoptimizer/veth-backpressure-performance-testing

In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences wx->msix_entry->entry, leading to a NULL pointer dereference crash. This issue was introduced by fixing the IRQ vector when the number of VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to determine the correct vector index. Additionally, as a side fix, set the interrupt mask to BIT(0) for the non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts share vector 0, and the WX_PX_MISC_IVAR register is only valid in the MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause when MSI-X is disabled.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: reject dev-bound programs bound to a different device cls_bpf_prog_from_efd() obtained a SCHED_CLS program via bpf_prog_get_type_dev() but never verified that a device-bound (offloaded) program's bound netdev matches the TC netdev the classifier is being attached to. This let a program loaded with prog_ifindex for device A be attached via cls_bpf + skip_sw to device B; deleting device A then destroyed the program's offload state while it was still attached to device B, triggering a netdevsim WARN (panic with panic_on_warn=1). Mirror the XDP attach path (net/core/dev.c) and reject the attach with -EINVAL when a dev-bound program's bound device does not match the target device.

Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, an unauthenticated HTTP/2 peer can cause an out-of-memory denial of service in the Ember backend with HTTP/2 enabled. The Hpack wrapper in ember-core/shared/src/main/scala/org/http4s/ember/core/h2/Hpack.scala concatenates HEADERS and CONTINUATION frame fragments and decodes them into a single List, but maxHeaderSize accounting does not include indexed headers or HPACK per-header overhead. A small compressed header block can therefore expand into a much larger decoded representation that remains in memory for processing. Servers exposed to untrusted HTTP/2 traffic and clients directed to an untrusted HTTP/2 server are affected, and concurrent malicious connections can exhaust the process heap. This issue is fixed in versions 0.23.35 and 1.0.0-M47.

IzPack is a widely used tool for packaging applications on the Java platform as cross-platform installers. In 5.2.6 and earlier, UnpackerBase.unpack() in izpack-installer/src/main/java/com/izforge/izpack/installer/unpacker/UnpackerBase.java obtains an attacker-controlled PackFile targetPath, passes it through IoHelper.translatePath(), which only converts separators, and constructs a File without normalizing parent-directory segments or enforcing destination containment. A malicious installer pack entry containing ../ sequences can therefore write outside the intended installation directory to startup folders, executable search paths, or other locations accessible with the victim's privileges when the victim runs the installer.

LogTape is an unobtrusive logging library. Prior to 1.3.11, 2.0.14, and 2.1.5, the @logtape/syslog package's escapeStructuredDataValue() function in packages/syslog/src/syslog.ts does not neutralize C0 control characters from U+0000 through U+001F in structured data values, and formatStructuredData() inserts property keys without validating the RFC 5424 SD-NAME grammar. When includeStructuredData is true, an attacker-controlled newline can terminate an RFC 6587 non-transparent TCP syslog frame and make following bytes appear as a forged RFC 5424 record, while a key containing a closing bracket or other forbidden character can terminate or corrupt the structured-data element. Applications that forward attacker-controlled property values or keys can therefore allow forged records with arbitrary hosts, applications, process identifiers, facilities, or severity levels, undermining downstream collector and SIEM integrity. This issue is fixed in versions 1.3.11, 2.0.14, and 2.1.5.

Rently Smart Home versions 20.1.0 and prior are vulnerable to an Insufficiently Protected Credentials vulnerability. This could allow an attacker to retrieve pins including the Master Pin, overriding standard user permissions.

RustDesk versions before 1.4.7 contain an uncontrolled speculative memory allocation vulnerability in BytesCodec. Before authentication, the decoder trusts the payload length encoded in a four-byte frame header and reserves that amount before receiving the payload. A crafted header can request up to 1,073,741,823 bytes of capacity, allowing unauthenticated attackers to use concurrent TCP connections to cause memory exhaustion and denial of service. The fix caps header-triggered speculative preallocation at 256 KiB.

Improper Neutralization of Special Elements used in an LDAP Query ('LDAP Injection') vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Liderahenk allows LDAP Injection. This issue affects Liderahenk: from 3.4.0 before 3.5.5.

GitLab has remediated an issue in GitLab EE affecting all versions from 18.9 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user with developer-role permissions could have executed arbitrary commands in a CI context, due to the Claude agent processing configuration from a user-controlled source.

The Formidable Charts plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 2.0.1 via the 'frm_graph' parameter. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. Successful exploitation requires Formidable Forms Lite, Formidable Forms Pro, and Formidable Charts to be active and requires the wp-content/uploads/frm-charts/ directory to exist, normally after an image-format chart is rendered.

On Linux, several OpenZFS ioctl authorization checks accept a capability held only within a user-created, unprivileged namespace as equivalent to real host privilege, allowing an unprivileged local user to perform operations that should require root. Affected operations include pool-administrative operations (eg create, import, destroy), pool event log access (zpool events) and fault injection (zinject). Exploiting the problem requires only that the local user is permitted to open /dev/zfs (governed by local device permissions) and that the kernel permits unprivileged user namespace creation. No prior access to the target pool or its underlying devices is needed.

A stack-based buffer overflow vulnerability exists in the Dia diagram editor when processing Network Bus objects from Dia XML project files. In objects/network/bus.c, bus_load() reads the number of bus handles from the file attribute "bus_handles" using attribute_num_data() without validating an upper bound: bus->num_handles = attribute_num_data(attr); When a bus handle is subsequently moved, bus_handle_moved() allocates two temporary arrays on the stack: parallel = (real *)g_alloca(num_handles * sizeof(real)); perp = (real *)g_alloca(num_handles * sizeof(real)); Because num_handles is fully attacker-controlled via the project file, sufficiently large values (for example 262144 or higher) cause g_alloca() to consume more stack space than the default thread stack limit (typically 8 MB on Linux), resulting in stack overflow, SIGSEGV, and potential stack frame / return-address corruption. An attacker can embed a Bus object with an excessive bus_handles count in a malicious .dia file. Exploitation requires the victim to open the file in Dia (file dialog, command line, or file association) and trigger handle manipulation (moving a bus handle), which exercises the vulnerable code path. The identical g_alloca pattern is present in objects/Misc/tree.c (copied from bus.c) and is likely vulnerable to the same class of attack via Tree objects. Affected versions: Dia 0.98.0 and earlier versions containing this code; issue confirmed on upstream master as of 2026-08-21. Upstream report: https://gitlab.gnome.org/GNOME/dia/-/issues/581

The vulnerability allows the unauthorised generation of physical access QR codes due to the use of hard-coded credentials within the application. The generation mechanism uses the 'badge_number' parameter as the HMAC private key, the value of which remains static and is accessible via the API using the endpoint '/club/_id_club_/member/_id_member_/resamania_qr_info'. An attacker with access to this value and to the application’s cryptographic logic, which can be extracted by reverse engineering the APK as there is no code obfuscation, could generate valid QR codes indefinitely, even after the user has changed their password or logged out.

Reliance on Untrusted Inputs in a Security Decision vulnerability in Apache APISIX. This vulnerability allows an attacker to escalate privilege or perform an authorization bypass by sending certain values that the attach-consumer-label plugin does not sanitise correctly. This issue affects Apache APISIX: from 3.11.0 through 3.17.0. Users are recommended to upgrade to version 3.18.0, which fixes the issue.

The Classified Listing - Mobile Number Verification plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.6.0. This is due to missing server-side Firebase OTP validation in the process_otp_login() function. This makes it possible for unauthenticated attackers to authenticate as any user with a phone number registered in the plugin's phone table by submitting an arbitrary OTP code and UID through the Firebase OTP login flow. Successful exploitation requires OTP login to be enabled with Firebase selected as the verification gateway, and requires the attacker to know or guess the target account's registered phone number. Administrator account takeover is possible if an administrator account has a phone number registered in the plugin.

NLTK versions before 3.10.0 contain a regular expression denial of service vulnerability in Text.findall() and TokenSearcher.findall() methods that accept user-supplied regular expressions without validation or timeout. Attackers can supply crafted regex patterns that cause catastrophic backtracking, resulting in indefinite CPU saturation and denial of service to all users of the Python process.

OneUptime's webhook target check rejects private and loopback addresses given in IPv4 form and a small set of IPv6 forms, but has no case for the IPv4-mapped IPv6 range. The webhook delivery path calls SSRFProtection.validateWebhookTargetIsSafe, and the host-literal screening inside Common/Server/Utils/SSRFProtection.ts, performed by isBlockedHostnameLiteral, rejects private and loopback IPv4 ranges and tests an IPv6 value against the unspecified address, the loopback, the link-local prefix and the unique-local prefixes. A value such as [::ffff:127.0.0.1] matches none of them. The value is also recognised as an address literal rather than a name, so the path that re-checks addresses obtained from resolution is not taken. The HTTP client treats the mapped form as the embedded IPv4 address and connects to it, so an authenticated project member who can configure a webhook can direct the server at loopback services, private network ranges and link-local metadata endpoints, and the response is recorded where the webhook result can be read. Version 12.0.7 adds handling for the mapped range.

TarsWeb enforces its per-application roles by calling AuthService from individual controller methods, and four methods in app/controller/patch/PatchController.js make no such call. uploadAndPublish accepts a package upload and then builds and dispatches a deployment task to every server matching the supplied application and module name, while its sibling uploadPatchPackage, which only stores the package, does check developer authorization first. The only precondition uploadAndPublish enforces is that the named server is registered, and any registered server in the installation satisfies it. downloadPackage and deletePatchPackage select a package by an unscoped sequential primary key covering every application's uploads, and setPatchPackageDefault changes which package a given application deploys by default. Any authenticated account, including one holding a role scoped to a single unrelated application, can therefore push a package to and trigger its deployment on any server the console manages, retrieve or delete any other application's package, and change which package is deployed by default.

mcp-fetch checks a fetch target against its SSRF guard without removing the brackets that surround an IPv6 literal. isSafeUrl reads the hostname from the parsed URL, which for a literal such as http://[::1]/ yields the bracketed string, and then tests it with net.isIP. That call returns zero for a bracketed value, so the branch holding the private-address checks is skipped entirely. The guard falls back to resolving the hostname, the bracketed string is not a resolvable name, no addresses are returned, and the target is reported safe. The HTTP client then strips the brackets and connects. Because the address may be given in IPv4-mapped form, the same path reaches any IPv4 target the loopback and private checks were meant to exclude, including link-local metadata endpoints. isPrivateIPv6 also has no case for the ::ffff: prefix, so the mapped form would still pass even if the brackets were removed. The fetch target is supplied as a tool argument, so an attacker who can influence what the model requests can read internal responses back into the model context.

StarRocks performs no privilege check when a legacy synchronous materialized view is dropped. Every other statement type routed through AuthorizerStmtVisitor calls into Authorizer before execution, but visitDropMaterializedViewStatement returns immediately with a comment stating the check happens in execution logic. That holds only for asynchronous materialized views: LocalMetastore.dropMaterializedView calls Authorizer.checkMaterializedViewAction inside a branch taken when the resolved table is a MaterializedView. A legacy synchronous materialized view is stored as a rollup index on an OlapTable rather than a MaterializedView, so the other branch runs, reaching AlterJobMgr.processDropMaterializedView and MaterializedViewHandler, neither of which contains any Authorizer call. The former locates the target by scanning every OlapTable in the named database for a matching rollup index, and the latter validates only table state and name conflicts. Any authenticated account can therefore drop a legacy synchronous materialized view belonging to any database, holding no grant on the view, the base table or the database, and the drop is indistinguishable from an authorized one.

A malicious actor with access to the network could exploit an Improper Access Control vulnerability found in UniFi Connect Application to escalate privileges within the UniFi Connect Application.

A command injection vulnerability in TeamViewer Full Client and Host for Linux prior to version 15.81.5 allows a remote attacker to execute arbitrary commands in the context of the current user via a specially crafted URL sent through the out-of-session chat feature. Exploitation requires user interaction by clicking the malicious link.

The OpenRGB network protocol allows attackers to cause memory exhaustion and out-of-bounds memory reads and writes by passing inconsistent data.

Improper neutralization of path traversal sequences in TeamViewer Desktop Clients prior Version 15.81.5 allows an authenticated remote session participant to write files to unintended locations on the local file system via file transfer or virtual file clipboard mechanisms. An attacker can leverage this behavior to achieve arbitrary file write and potentially execute code with the privileges of the affected user.

EFence developed by Thinking Software Technology has an Arbitrary File Upload vulnerability. Authenticated remote attackers can upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server.