CVE Database

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix change notify replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_notify_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_flush() replay SMB2_flush() keeps its response buffer bookkeeping across replay attempts. If a replayable flush response is received and the retry then fails before cifs_send_recv() stores a replacement response, flush_exit will free the stale response pointer a second time. Reinitialize resp_buftype and rsp_iov at the top of the replay loop so cleanup only acts on response state produced by the current attempt. This fixes a double-free without changing replay handling for successful requests.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page nvmet_execute_disc_get_log_page() validates only the dword alignment of the host-supplied Log Page Offset (lpo). The 64-bit offset is then added to a small kzalloc'd buffer that holds the discovery log page and the result is passed straight to nvmet_copy_to_sgl(), which memcpy()s data_len bytes out to the host with no source-side bound check: u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */ size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */ ... if (offset & 0x3) { ... } /* only check */ ... alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req); buffer = kzalloc(alloc_len, GFP_KERNEL); ... status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len); The Discovery controller is unauthenticated -- nvmet_host_allowed() returns true unconditionally for the discovery subsystem -- so the call is reachable pre-authentication by any TCP/RDMA/FC peer that can reach the nvmet target. With a discovery log page of ~1 KiB, an attacker requesting up to 4 KiB starting at offset == alloc_len reads the next slab page out and gets its content returned over the fabric (an empirical run on a default nvmet-tcp loopback target leaked 81 canonical kernel pointers in one Get Log Page response). Pointing the offset at unmapped kernel memory faults the in-kernel memcpy and crashes (or panics, on panic_on_oops=1) the target host instead. The attacker-controlled source-side offset pattern "nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every other Get Log Page handler in admin-cmd.c either ignores lpo (and silently starts every response at offset 0) or tracks a local destination offset with a fixed source pointer. Validate the host-supplied offset against the log page size, cap the copy length to what is actually available, and zero-fill any remainder of the host transfer buffer. The zero-fill matches the existing short-response pattern in nvmet_execute_get_log_changed_ns() (admin-cmd.c) and prevents leaking transport SGL contents when the host asks for more bytes than the log page contains.

In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: validate reply message payload bounds against transfer length nvmet_auth_reply() accesses the variable-length rval[] array using attacker-controlled hl (hash length) and dhvlen (DH value length) fields without verifying they fit within the allocated buffer of tl bytes. A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a small transfer length but large hl/dhvlen values, causing out-of-bounds heap reads when the target processes the DH public key (rval + 2*hl) or performs the host response memcmp. With DH authentication configured, the OOB pointer is passed directly to sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching up to 526 bytes past the buffer. This is exploitable pre-authentication. Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before any access to the variable-length fields. Discovered by Atuin - Automated Vulnerability Discovery Engine.

In the Linux kernel, the following vulnerability has been resolved: spi: fsl-lpspi: terminate the RX channel on TX prepare failure path When dmaengine_prep_slave_sg() fails for the TX channel, the error path terminates the TX DMA channel but leaves the RX channel running. Since the RX channel was already submitted and issued prior to preparing the TX descriptor, returning -EINVAL causes the SPI core to unmap the DMA buffers while the RX DMA engine continues writing to them, leading to potential memory corruption or use-after-free. Terminate the RX channel before returning on the TX prepare failure path.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer.

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject overlapping data areas in SMB2 responses Commit 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") restricted the implied bcc[0] length exception to responses without a data area. However, the overlap handling in __smb2_calc_size() clears data_length, which can make an invalid response appear to have no data area and so qualify for the exception. Track data area overlap separately and reject such responses before applying the length compatibility exceptions.

Catalyst::View::Wkhtmltopdf versions before 0.6.1 for Perl allow shell command injection (RCE) via PDF render options. Options are passed directly to the wkhtmltopdf command without sanitization. Any web application that passes user-controlled options such as the page_size, orientation or margins without validation allows shell command injection. Version 0.6.0 was released with an incomplete fix for this issue. Note that the wkhtmltopdf project is no longer being developed, and users of this package should migrate to alternative solutions.

An integer overflow when calculating physical offsets for sparse PMRs may result in 32-bit truncation of address computations for PMRs larger than 4 GB. This can lead to incorrect GPU MMU mappings and may allow a non-privileged user to trigger access to unintended physical memory, resulting in memory corruption or information disclosure.

The web management interface of Tycon Systems TPDIN-Monitor-WEB2  does not perform server-side validation of credentials during the login process. By submitting empty values for both credential fields, an unauthenticated remote attacker can bypass the authentication check and establish a valid administrative session. This grants full access to device controls including power relay management, device reboot, remote access service configuration, and network settings, which could allow an attacker to disrupt connected infrastructure or cause physical damage to equipment.

Improper authorization in Azure Portal allows an unauthorized attacker to disclose information over a network.

In epa4all, prior to version 2026-05-20, an attacker who can intercept the TLS connection between epa4all and the ePA backend can complete the VAU handshake with attacker-controlled keys and obtain the session encryption keys. All inner HTTP traffic (patient consent decisions, medication data, document operations, authorization tokens, and entitlement queries) becomes readable and modifiable. The attacker can also inject arbitrary requests through the hijacked channel. This issue has been patched in version 2026-05-20.

In the Linux kernel, the following vulnerability has been resolved: block: recompute nr_integrity_segments in blk_insert_cloned_request blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via <linux/blk-integrity.h>, which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages() netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it is wanting to unlock and compares that to rreq->no_unlock_folio so that it doesn't unlock a folio being read for netfs_perform_write() or netfs_write_begin(). However, given that netfs_unlock_abandoned_read_pages() is called _after_ NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to dereference is the one specified by ->no_unlock_folio as ownership immediately reverts to the caller. Fix this by storing the folio pointer instead and using that rather than the index. Also fix netfs_unlock_read_folio() where the same applies.

Improper access control in Azure App Service allows an unauthorized attacker to elevate privileges over a network.

Image::WebP versions before 0.3.0 for Perl bundle a vulnerable version of libwebp. Image::WebP does not link to the system libwebp. Instead, it uses a bundled copy of libwebp 0.3.0 (released 2013-03-20). That version has multiple known vulnerabilities, including CVE-2023-4863. Any caller that decodes an untrusted WebP image reaches the bundled decoder. Because the library is compiled into the module, upgrading the system libwebp does not remediate this.

Server-side request forgery (ssrf) in Data Quality allows an unauthorized attacker to elevate privileges over a network.

Missing authentication for critical function in Microsoft Azure Kubernetes Service allows an unauthorized attacker to elevate privileges over a network.

Improper Link Resolution (CWE-59) in `/usr/bin/larm_starter` in Loytec L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an authenticated `larmapp` attacker to make `/etc/passwd` writable by the `larmapp` group (leading to root privilege escalation) via a symlink attack on `/etc/lighttpd/ssl/server.pem`.

TOML::XS versions before 0.06 for Perl bundle an unsupported and vulnerable version of tomlc99. The tomlc99 library is no longer maintained, and has an uncontrolled recursion vulnerability publicly reported in the issue tracker. Any caller that passes untrusted TOML to from_toml risks a stack overflow from a deeply-nested document. TOML::XS version 0.06 or later uses the successor tomlc17 library.

An unrestricted upload of file with dangerous type vulnerability in the e-paper draft upload function of SUNNET Corporate Training Management System through v10.3 allows remote authenticated users with administrator privileges to execute arbitrary commands by uploading a crafted ZIP archive containing a server-executable file.

In Eclipse BaSyx Go Components versions up to and including 1.0.0, ABAC-enabled deployments are vulnerable to an authorization bypass caused by inconsistent trailing-slash handling between the ABAC middleware and the HTTP router. The shared router configuration used Chi's `middleware.StripSlashes`, so a request such as `GET /shells/` was dispatched to the registered `GET /shells` route. However, the ABAC middleware evaluated the original request path including the trailing slash. If ABAC route lookup did not find a matching slash-suffixed route, the request was passed onward and the router then stripped the slash and executed the protected handler without the intended ABAC authorization decision and without the expected ABAC query filters. An unauthenticated or unauthorized network attacker could append a trailing slash to protected API routes to reach handlers that should have been denied by ABAC policy. Depending on the exposed component, HTTP method, and deployed policy, this could allow unauthorized read, create, update, delete, or upload operations. The issue affects ABAC-enabled deployments of services that use the shared router and ABAC middleware, including AAS Repository, Submodel Repository, AAS Registry, Submodel Registry, Concept Description Repository, Discovery, AAS Environment upload, and related services. The issue is fixed in Eclipse BaSyx Go Components v1.0.1.

The Project Management, Bug and Issue Tracking Plugin WordPress plugin before 5.1.0 does not sanitise and escape user supplied input before using it in a SQL query, allowing unauthenticated attackers to perform SQL injection attacks. This is exploitable in the Project Management, Bug and Issue Tracking Plugin WordPress plugin before 5.1.0's standard front-end issue-tracker configuration.

Improper authentication in Azure Key Vault allows an unauthorized attacker to elevate privileges over a network.

Missing authorization in Azure DNS allows an unauthorized attacker to elevate privileges over a network.

Improper authentication in Microsoft Exchange Online allows an unauthorized attacker to perform tampering over a network.

Heap-based buffer overflow in Microsoft Account allows an unauthorized attacker to execute code over a network.

Improper authorization in Azure Red Hat OpenShift (ARO) allows an authorized attacker to elevate privileges over a network.