CVE Database

In the Linux kernel, the following vulnerability has been resolved: uacce: ensure safe queue release with state management Directly calling `put_queue` carries risks since it cannot guarantee that resources of `uacce_queue` have been fully released beforehand. So adding a `stop_queue` operation for the UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to the final resource release ensures safety. Queue states are defined as follows: - UACCE_Q_ZOMBIE: Initial state - UACCE_Q_INIT: After opening `uacce` - UACCE_Q_STARTED: After `start` is issued via `ioctl` When executing `poweroff -f` in virt while accelerator are still working, `uacce_fops_release` and `uacce_remove` may execute concurrently. This can cause `uacce_put_queue` within `uacce_fops_release` to access a NULL `ops` pointer. Therefore, add state checks to prevent accessing freed pointers.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs attributes: 1. Off-by-one error: The loop condition used '<=' instead of '<', causing access beyond array bounds. Since array indices are 0-based and go from 0 to instances_count-1, the loop should use '<'. 2. Missing NULL check: The code dereferenced attr_name_kobj->name without checking if attr_name_kobj was NULL, causing a null pointer dereference in min_length_show() and other attribute show functions. The panic occurred when fwupd tried to read BIOS configuration attributes: Oops: general protection fault [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg] Add a NULL check for attr_name_kobj before dereferencing and corrects the loop boundary to match the pattern used elsewhere in the driver.

In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In kvaser_usb_remove_interfaces() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than the minimum expected length, crypto_authenc_esn_decrypt() can advance past the end of the destination scatterlist and trigger a NULL pointer dereference in scatterwalk_map_and_copy(), leading to a kernel panic (DoS). Add a minimum AAD length check to fail fast on invalid inputs.

A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. This vulnerability is due to improper input validation of the parameters in the HTTP request. An attacker could exploit this vulnerability by intercepting and modifying an HTTP request from a user. A successful exploit could allow the attacker to redirect the user to a malicious web page.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker must have valid administrative credentials.

A vulnerability in the Dynamic Vectoring and Streaming (DVS) Engine implementation of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to bypass the anti-malware scanner, allowing malicious archive files to be downloaded. This vulnerability is due to improper handling of certain archive files. An attacker could exploit this vulnerability by sending a crafted archive file, which should be blocked, through an affected device. A successful exploit could allow the attacker to bypass the anti-malware scanner and download malware onto an end user workstation. The downloaded malware will not automatically execute unless the end user extracts and launches the malicious file.&nbsp;

A vulnerability exists in F5 BIG-IP Container Ingress Services that may allow excessive permissions to read cluster secrets.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A stored cross-site scripting (XSS) vulnerability exists in the web management interface of the PPC (Belden) ONT 2K05X router running firmware v1.1.9_206L. The Common Gateway Interface (CGI) component improperly handles user-supplied input, allowing a remote, unauthenticated attacker to inject arbitrary JavaScript that is persistently stored and executed when the affected interface is accessed.

When a BIG-IP Advanced WAF or ASM security policy is configured on a virtual server, undisclosed requests along with conditions beyond the attacker's control can cause the bd process to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability exists in NGINX OSS and NGINX Plus when configured to proxy to upstream Transport Layer Security (TLS) servers. An attacker with a man-in-the-middle (MITM) position on the upstream server side—along with conditions beyond the attacker's control—may be able to inject plain text data into the response from an upstream proxied server.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability has been discovered in eladmin v2.7 and before. This vulnerability allows for an arbitrary user password reset under any user permission level.

An arbitrary file overwrite vulnerability in the file import process of Tarot, Astro & Healing v11.4.0 allows attackers to overwrite critical internal files, potentially leading to arbitrary code execution or exposure of sensitive information.

Docker Desktop for Windows contains multiple incorrect permission assignment vulnerabilities in the installer's handling of the C:\ProgramData\DockerDesktop directory. The installer creates this directory without proper ownership verification, creating two exploitation scenarios: Scenario 1 (Persistent Attack): If a low-privileged attacker pre-creates C:\ProgramData\DockerDesktop before Docker Desktop installation, the attacker retains ownership of the directory even after the installer applies restrictive ACLs. At any time after installation completes, the attacker can modify the directory ACL (as the owner) and tamper with critical configuration files such as install-settings.json to specify a malicious credentialHelper, causing arbitrary code execution when any user runs Docker Desktop. Scenario 2 (TOCTOU Attack): During installation, there is a time-of-check-time-of-use (TOCTOU) race condition between when the installer creates C:\ProgramData\DockerDesktop and when it sets secure ACLs. A low-privileged attacker actively monitoring for the installation can inject malicious files (such as install-settings.json) with attacker-controlled ACLs during this window, achieving the same code execution outcome.

The SIBS woocommerce payment gateway plugin for WordPress is vulnerable to time-based SQL Injection via the ‘referencedId’ parameter in all versions up to, and including, 2.2.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The All push notification for WP plugin for WordPress is vulnerable to time-based SQL Injection via the 'delete_id' parameter in all versions up to, and including, 1.5.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The WP Content Permission plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'ohmem-message' parameter in all versions up to, and including, 1.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The Smart Appointment & Booking plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the saab_save_form_data AJAX action in all versions up to, and including, 1.0.7 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The Extended Random Number Generator plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin settings in all versions up to, and including, 1.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.

The Fortis for WooCommerce plugin for WordPress is vulnerable to authorization bypass due to an inverted nonce check in the 'check_fortis_notify_response' function in all versions up to, and including, 1.2.0. This makes it possible for unauthenticated attackers to update arbitrary WooCommerce order statuses to paid/processing/completed, effectively allowing them to mark orders as paid without payment.

The WebPurify Profanity Filter plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'webpurify_save_options' function in all versions up to, and including, 4.0.2. This makes it possible for unauthenticated attackers to change plugin settings.

The Magic Import Document Extractor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.4 via the get_frontend_settings() function. This makes it possible for unauthenticated attackers to extract the site's magicimport.ai license key from the page source on any page containing the plugin's shortcode.

The Magic Import Document Extractor plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the ajax_sync_usage() function in all versions up to, and including, 1.0.5. This makes it possible for unauthenticated attackers to modify the plugin's license status and credit balance.

The Code Explorer plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.4.6 via the 'file' parameter. This makes it possible for authenticated attackers, with Administrator-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information.

The Chapa Payment Gateway Plugin for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.3 via 'chapa_proceed' WooCommerce API endpoint. This makes it possible for unauthenticated attackers to extract sensitive data including the merchant's Chapa secret API key.

The MyRewards – Loyalty Points and Rewards for WooCommerce plugin for WordPress is vulnerable to missing authorization in all versions up to, and including, 5.6.1. This is due to the plugin not properly verifying that a user is authorized to perform an action in the 'ajax' function. This makes it possible for authenticated attackers, with subscriber level access and above, to modify, add, or delete loyalty program earning rules, including manipulating point multipliers to arbitrary values.

The Xendit Payment plugin for WordPress is vulnerable to unauthorized order status manipulation in all versions up to, and including, 6.0.2. This is due to the plugin exposing a publicly accessible WooCommerce API callback endpoint (`wc_xendit_callback`) that processes payment callbacks without any authentication or cryptographic verification that the requests originate from Xendit's payment gateway. This makes it possible for unauthenticated attackers to mark any WooCommerce order as paid by sending a crafted POST request to the callback URL with a JSON body containing an `external_id` matching the order ID pattern and a `status` of 'PAID' or 'SETTLED', granted they can enumerate order IDs (which are sequential integers). This leads to orders being fraudulently marked as completed without any actual payment, resulting in financial loss and inventory depletion.

If a malformed data is input to the affected product, a CSV file downloaded from the affected product may contain such malformed data. When a victim user download and open such a CSV file, the embedded code may be executed in the user's environment. Note that Movable Type 7 series and 8.4 series, which are End-of-Life (EOL), are affected by the vulnerability as well.

A non-administrative user can upload malicious files. When an administrator or the product accesses that file, an arbitrary script may be executed on the administrator's browser. Note that Movable Type 7 series and 8.4 series, which are End-of-Life (EOL), are affected by the vulnerability as well.

Movable Type contains a stored cross-site scripting vulnerability in Export Sites. If crafted input is stored by an attacker, arbitrary script may be executed on a logged-in user's web browser. Note that Movable Type 7 series and 8.4 series, which are End-of-Life (EOL), are affected by the vulnerability as well.