CVE Database

In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_write_cm_event() ctx->file may only be changed under the handler lock and the xa_lock, which is what stops uevents being queued for a ctx while ucma_migrate_id() moves it to another file. The CM core takes that lock before invoking ucma_event_handler(), but the write() paths that queue uevents themselves do not. ucma_write_cm_event() re-reads ctx->file for each of its four dereferences, so ucma_migrate_id() can swap it mid-sequence: mutex_lock(&ctx->file->mut); /* file A */ list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */ mutex_unlock(&ctx->file->mut); /* file B */ wake_up_interruptible(&ctx->file->poll_wait); /* file B */ The window is the mutex_lock() itself: the writer sleeps in it while the migration reassigns ctx->file. The list_add_tail() then runs on file B's event_list holding only file A's mutex: list_add corruption. prev->next should be next (ffff888101320f30), but was ffff88814a08c418. (prev=ffff88814a075c18). kernel BUG at lib/list_debug.c:32! Call Trace: ucma_write_cm_event+0x36e/0x5e0 and file A's mut is left held forever, wedging its next writer in D state. The uevent is also stranded on a list ucma_cleanup_ctx_events() will not walk, so it outlives its context. /dev/infiniband/rdma_cm is 0666 and no RDMA device is involved, so an unprivileged user reaches all of this. Take the handler lock, as ucma_cleanup_mc_events() does; ctx->cm_id is pinned by the ucma_get_ctx() reference.

In the Linux kernel, the following vulnerability has been resolved: regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a reference on np, which is then assigned to pdev->dev.of_node. The function immediately calls of_node_put(np), releasing the reference and leaving pdev->dev.of_node as a dangling pointer. Remove the of_node_put(np) call to let the device hold the reference.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page() ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set, it can allocate a reader page with an outdated order. This isn't a big issue, the user can still re-allocate a new reader page and try again. However, what is more problematic is if the value of subbuf_order changes in the middle of ring_buffer_alloc_read_page(). In that case, bpage->order might not match the actual allocated memory. Use bpage->order for the allocation to prevent this race.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Hold cpu_buffer::lock when resizing a subbuf Because, ring_buffer_subbuf_order_set() can clear cpu_buffer->free_page, hold cpu_buffer->lock to prevent races with ring_buffer_alloc_read_page() and ring_buffer_free_read_page().

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page Discarding a cached reader page after a concurrent ring buffer resize uses the new global subbuf_order for the free_pages() call. This mismatched order may crashes the kernel or leaks memory because the cached page was allocated under the old size. Save the actual free_page order alongside the page address to ensure we always refer to the correct value and do not rely on the potentially stalled cpu_buffer->subbuf_order value. The simplest is to make free_page a buffer_data_read_page which already covers exactly what we need: a page address and a page order.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Stop remote reader update when page swap fails The remote swap_reader_page callback can return -EBUSY when the writer moves the head before the remote catches it, particularly during an event storm on a small buffer. __rb_get_reader_page_from_remote() currently warns about that failure but continues with the unchanged reader ID and rearranges the local page list as though the swap succeeded. Handle the callback failure as a recoverable error. Report it with pr_warn_ratelimited() and return NULL. Callers already handle a NULL reader page as a failed attempt. This avoids splicing the same page as both the previous and new reader without flooding the log under contention.

In the Linux kernel, the following vulnerability has been resolved: orangefs: skip leading spaces before parsing client debug masks orangefs_prepare_cdm_array() sizes each client debug keyword buffer with strcspn(cds_head, " "), but then parses the keyword with %s. The %s conversion skips leading whitespace, while strcspn() does not. If a client debug entry starts with a space, the allocation can be sized for an empty keyword while sscanf() copies the following non-empty token. This can write past the end of the allocated keyword buffer. Skip leading spaces before computing the keyword length so the allocation matches the string parsed by sscanf().

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate rl_used against rl_count in refcount block validator ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array with: for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) { rec = &rb->rf_records.rl_recs[i]; ... rl_recs[] lives in a single metadata block (4096 bytes on the common configuration), so its real capacity is fixed by ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the 16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly off disk by ocfs2_validate_refcount_block() and are never checked against that capacity, nor against each other, before any refcount/reflink/CoW operation walks the array. A crafted (or corrupted) refcount block with rl_used == 0xffff makes the loop above walk far past the end of the block, dereferencing rl_recs[i] for i up to 65534. The resulting index is then handed to the sibling ocfs2_insert_refcount_rec(), whose insert-shift does: if (index < le16_to_cpu(rf_list->rl_used)) memmove(&rf_list->rl_recs[index + 1], &rf_list->rl_recs[index], (le16_to_cpu(rf_list->rl_used) - index) * sizeof(struct ocfs2_refcount_rec)); i.e. a memmove() of up to (0xffff - index) * 16 bytes (~1 MiB) from an offset already past the block. This is reachable from an ordinary reflink (FICLONE) against a crafted/corrupted ocfs2 image: attaching an extent whose cpos sorts past every real record in the leaf forces the lookup to run off the end instead of returning early on a match. The attacker model is local: CAP_SYS_ADMIN mounting a crafted or corrupted ocfs2 image, or a raw write to the block device backing an already-mounted ocfs2 filesystem. ocfs2_validate_refcount_block() already validates the block's ECC, signature, rf_blkno and rf_fs_generation, but never rl_count/rl_used against the block's actual on-disk capacity. This is the same class of gap that ocfs2_validate_extent_block() (fs/ocfs2/alloc.c) already closes for the sibling extent-list header, which checks both the record capacity and the "used" bound before any code walks h_list.l_recs[]: if (le16_to_cpu(eb->h_list.l_count) != ocfs2_extent_recs_per_eb(sb)) { rc = ocfs2_error(...); goto bail; } if (le16_to_cpu(eb->h_list.l_next_free_rec) > le16_to_cpu(eb->h_list.l_count)) { rc = ocfs2_error(...); goto bail; } Add the equivalent pair of checks to ocfs2_validate_refcount_block(): reject a refcount block whose rl_count does not match the fixed per-block capacity returned by ocfs2_refcount_recs_per_rb(), and reject rl_used > rl_count. Both checks are skipped when OCFS2_REFCOUNT_TREE_FL is set, because in that case the same union bytes hold an ocfs2_extent_list (rf_list), not the refcount record list (rf_records) -- that layout is already validated separately by ocfs2_validate_extent_block() when the referenced extent block is read. This mirrors the existing "!(rb->rf_flags & OCFS2_REFCOUNT_TREE_FL)" guard used elsewhere in this file (e.g. ocfs2_get_refcount_rec()) to decide whether rf_records or rf_list is the live member of the union. With this in place, a forged rl_used/rl_count is caught at block validation time (ocfs2_error()), consistent with every other corruption check in this function, instead of driving an out-of-bounds read in ocfs2_find_refcount_rec_in_rl() and a subsequent out-of-bounds memmove() in ocfs2_insert_refcount_rec(). Verified against a crafted image on a v6.19 KASAN (KASAN_GENERIC) build: replaying the same reflink (FICLONE) reliably hit a KASAN report in __ocfs2_increase_refcount()/ocfs2_insert_refcount_rec() before this patch, and triggers no report once ocfs2_validate_refcount_block() rejects the forged rl_used/rl_count.

In the Linux kernel, the following vulnerability has been resolved: openrisc: fix arbitrary kernel memory access via or1k_atomic syscall sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user pointers, v1 and v2, and swaps the words they point to in hand-written assembly. l.lwz r29,0(r4) l.lwz r27,0(r5) l.sw 0(r4),r27 l.sw 0(r5),r29 The pointers are not checked with access_ok(). The four memory accesses also have no exception table entries. A caller passes a kernel address as either pointer, and the syscall reads from and writes to it directly. This gives an unprivileged process a kernel read/write primitive. It overwrites kernel data such as the sys_call_table, gaining code execution in kernel context. Check both pointers before entering the critical section. Add fixups for the four memory accesses so faults on valid but unmapped user addresses return -EFAULT. [shorne@gmail.com: fix comment style]

In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix CT limit teardown use-after-free Packet processing uses CT limit state under RCU, while netns teardown frees that state under ovs_mutex. The CT limit pointer was neither removed from readers nor protected by a grace period, allowing packet processing to dereference the freed state. An unprivileged user can trigger this bug from a user and network namespace, causing a slab-use-after-free in ovs_ct_execute() when the netns is torn down. Publish the CT limit pointer through RCU, remove it before teardown, and wait for readers before freeing its contents. Keep ovs_mutex around individual CT limit updates, and use the RCU read-side lock while GET traverses the RCU-protected limit lists. Netns teardown detaches the RCU-protected CT limit state in the pernet .pre_exit callback while holding ovs_mutex. The pernet core guarantees an RCU grace period between the .pre_exit and .exit callbacks, so the .exit callback completes the teardown without adding any extra synchronization. The netlink command handlers do not need NULL checks because the userspace netlink socket holds an active reference to its network namespace while a request is processed. The per-netns exit path therefore cannot run concurrently with SET, DEL, or GET for that socket's namespace.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb. Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb(). The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user() Commit 9e91f8a6c868 ("ipmi:msghandler: Remove srcu for the ipmi_interfaces list") dropped the synchronize_rcu() between unlinking the command receivers from intf->cmd_rcvrs and freeing them, updating only the comment that explains why the barrier is needed. The cmd_rcvrs list is still traversed under plain RCU: find_cmd_rcvr() walks it inside rcu_read_lock(), and handle_ipmb_get_msg_cmd() borrows rcvr->user from that lookup within the same read-side section. Without the grace period, _ipmi_destroy_user() can kfree() a cmd_rcvr while a reader still holds a pointer to it, causing a use-after-free. The rework only made srcu unnecessary for the interfaces list; the cmd_rcvrs list still relies on plain RCU. Restore the synchronize_rcu() before freeing the receivers.

In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) * NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges the command declares, because some devices ignore the 'Number of Ranges' field - the Fixes: commit records two that read past the declared ranges. A single-range discard fills only the first 16 bytes. Normally the buffer comes from kzalloc() and the other 4080 bytes are zero. When that allocation fails the code falls back to the per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with alloc_page(GFP_KERNEL) and nothing ever zeroes, so those 4080 bytes are whatever the page last held and are handed to the controller. Reaching it requires the kzalloc(GFP_ATOMIC | __GFP_NOWARN) to fail, that is memory pressure; it is not remotely triggerable. Failing the allocation under KMSAN reproduces it, with the leaked tail full of vmemmap struct page pointers. The extent in the report is a partial transfer of the payload, not the whole 4096 bytes; the 16-byte boundary in it is the one declared range: [ 11.991601] BUG: KMSAN: uninit-value in dma_map_phys+0x14c8/0x1900 [ 11.991969] dma_map_phys+0x14c8/0x1900 [ 11.992220] dma_map_page_attrs+0xcf/0x130 [ 11.992485] e1000_xmit_frame+0x4099/0x6d10 [ 11.992768] dev_hard_start_xmit+0x22f/0xa80 [ 11.993068] sch_direct_xmit+0x35c/0xcb0 [ 11.993315] __dev_queue_xmit+0x1ee5/0x5eb0 [ 11.993608] ip_finish_output2+0x1903/0x1c30 [ 11.993881] ip_finish_output+0x288/0x870 [ 11.994125] ip_output+0x15e/0x400 [ 11.994365] __ip_queue_xmit+0x1e85/0x1fb0 [ 11.994639] ip_queue_xmit+0x60/0x80 [ 11.994899] __tcp_transmit_skb+0x4e71/0x5fa0 [ 11.995210] tcp_write_xmit+0x3a36/0x9160 [ 11.995533] __tcp_push_pending_frames+0xc5/0x3c0 [ 11.995854] tcp_push+0x7dc/0x840 [ 11.996076] tcp_sendmsg_locked+0x766c/0x8400 [ 11.996371] tcp_sendmsg+0x4b/0x90 [ 11.996572] inet_sendmsg+0x134/0x2a0 [ 11.996823] __sock_sendmsg+0x265/0x360 [ 11.997076] sock_sendmsg+0x100/0x1e0 [ 11.997293] nvme_tcp_try_send+0x196f/0x6370 [ 11.997605] nvme_tcp_queue_rq+0x1d54/0x20b0 [ 11.997882] blk_mq_dispatch_rq_list+0x5ee/0x2e50 [ 11.998175] __blk_mq_sched_dispatch_requests+0x16dc/0x24a0 [ 11.998539] blk_mq_sched_dispatch_requests+0x11b/0x2c0 [ 11.998865] blk_mq_run_work_fn+0x13b/0x280 [ 11.999146] process_scheduled_works+0x966/0x1ad0 [ 11.999465] worker_thread+0xe44/0x1480 [ 11.999709] kthread+0x53b/0x600 [ 11.999927] ret_from_fork+0x29f/0x7c0 [ 12.000191] ret_from_fork_asm+0x1a/0x30 [ 12.000460] [ 12.000558] Uninit was created at: [ 12.000788] __alloc_frozen_pages_noprof+0x8bf/0xd30 [ 12.001096] alloc_pages_mpol+0x1d0/0x5f0 [ 12.001326] alloc_pages_noprof+0x102/0x290 [ 12.001627] nvme_init_ctrl+0x5a3/0x9f0 [ 12.001891] nvme_tcp_create_ctrl+0xd75/0x19b0 [ 12.002170] nvmf_dev_write+0x4c68/0x4fd0 [ 12.002426] vfs_write+0x587/0x1a10 [ 12.002636] __x64_sys_write+0x207/0x4f0 [ 12.002874] x64_sys_call+0x2ff0/0x3ea0 [ 12.003123] do_syscall_64+0x147/0x3b0 [ 12.003400] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 12.003680] [ 12.003777] Bytes 16-2843 of 2844 are uninitialized [ 12.004068] Memory access of size 2844 starts at ffff888109f82000 [ 12.004412] [ 12.004530] CPU: 0 UID: 0 PID: 101 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMECTL-gf5098b6bae76 #1 PREEMPT(lazy) [ 12.005127] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 12.005762] Workqueue: kblockd blk_mq_run_work_fn [ 12.006073] ===================================================== Allocate the page with __GFP_ZERO. The single allocation site covers every use of it: bytes no discard has written stay zero, and bytes one did write hold that controller's own range list, which it has already been sent.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix host memory disclosure on R2T for a read command nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller. The command then completes normally and nothing is logged. Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned all 4096 bytes, split over two R2Ts. The pages contained stale kernel data, including an array of struct page pointers. Reject an R2T for a request that is not a write.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: reject a read that transferred too few bytes nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target. Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on: t = asoc->strreset_chunk->transport; if (timer_delete(&t->reconf_timer)) sctp_transport_put(t); chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published in asoc->strreset_chunk but not yet transmitted has neither, so completing it dereferences NULL. Two ways to get there. sctp_send_asconf_del_ip() sets asoc->src_out_of_asoc_ok without sending anything when the address being removed is the association's last one, and sctp_outq_flush_ctrl() then leaves every non-ASCONF control chunk queued; as only sctp_process_asconf_ack() clears that flag, it persists. An unprivileged process that removes such an address and then asks for a stream reset panics the kernel from softirq. A peer needs neither ASCONF nor local help: sctp_cmd_interpreter() uncorks the outqueue only once the whole packet has been processed, so a reply built while walking a RECONF chunk stays untransmitted for the rest of that walk, and one RECONF chunk carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request, Response] -- or two RECONF chunks in one packet -- reaches the same dereference. KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef] RIP: 0010:timer_delete+0x67/0x110 Call Trace: <IRQ> sctp_process_strreset_addstrm_out (net/sctp/stream.c:832) sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212) sctp_do_sm (net/sctp/sm_sideeffect.c:1172) sctp_assoc_bh_rcv (net/sctp/associola.c:1044) sctp_rcv (net/sctp/input.c:243) ip_local_deliver (net/ipv4/ip_input.c:262) process_backlog (net/core/dev.c:6680) </IRQ> A response can only acknowledge a request that was actually sent, so do not match asoc->strreset_chunk while chunk->transport is NULL. Guarding the lookup covers all three completion sites.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix stream->outcnt underflow on duplicate RECONF responses A cached RECONF chunk may contain more than one request parameter. A duplicate response can therefore find and process the same ADD_OUT request again while another parameter is still outstanding, rolling back outcnt twice and possibly underflowing it. Track outstanding request types as bits and clear each bit after its first response. Later responses for the same request are then ignored.

In the Linux kernel, the following vulnerability has been resolved: power: supply: charger-manager: register regulators before exposing sysfs charger_manager_remove() and the err_reg_extcon probe error path free each charger regulator with regulator_put() before tearing down the power_supply sysfs entries (power_supply_unregister()). charger_manager_remove() also calls try_charger_enable(cm, false) after the regulator_put() loop. A concurrent write to a charger's externally_control sysfs attribute that lands between regulator_put() and power_supply_unregister() can run charger_externally_control_store() and call try_charger_enable(), which, when charging is enabled, dereferences the already-freed consumer handle. When charging is enabled, try_charger_enable(cm, false) in .remove() also dereferences the freed handles directly. Both leave use-after-free windows. Symmetrically, probe registers the sysfs entries (power_supply_register) before acquiring the regulators (regulator_get, inside charger_manager_register_extcon), so userspace can reach externally_control before the regulators are available. Split charger_manager_register_extcon() on the sync/async boundary: charger_manager_get_regulators() (regulator_get only, no async producer) now runs before power_supply_register() so sysfs is not live before regulators are available, and charger_manager_register_extcon() keeps only the extcon notifier/work setup, still after power_supply_register() so a power_supply_register() failure cannot reach extcon setup. This keeps the sysfs setup/teardown ordering symmetric without introducing an asynchronous producer on the earlier probe-error path. Move power_supply_unregister() and try_charger_enable(cm, false) ahead of the regulator_put() loop on both teardown paths, and adjust err_reg_extcon (power_supply_unregister() then fall through err_regulator for regulator_put(); get_regulators self-rolls back on its own failure). This does not address the separate extcon-notifier-driven deref of the same handles, which needs its own synchronization design. Found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: power: supply: cros_usbpd-charger: bound the EC-reported port count cros_usbpd_charger_probe() reads two port counts from the EC and uses one of them, num_charger_ports, as the loop bound when populating a fixed-size array: struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */ ... for (i = 0; i < charger->num_charger_ports; i++) charger->ports[charger->num_registered_psy++] = port; Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports (from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The only validation is a sanity check that compares the two EC-reported values against each other: if (num_charger_ports < num_usbpd_ports || num_charger_ports > num_usbpd_ports + 1) return -EPROTO; It never checks either count against EC_USB_PD_MAX_PORTS, the size of the ports[] array. A malfunctioning, malicious or compromised EC that reports num_usbpd_ports == num_charger_ports == N for any N > 8 (for example both 255) passes this check, and the loop then writes N pointers into the 8-entry ports[] array embedded in the devm_kzalloc()'d charger_data, overflowing it by up to 255 - 8 = 247 entries (~1976 bytes): a slab out-of-bounds write. Reject a port count larger than the ports[] array can hold.

In the Linux kernel, the following vulnerability has been resolved: power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS Currently the cros_usbpd-charger driver probe iterates based on raw charger port count returned by the embedded controller. The only check is against the number of USB PD ports which the embedded controller also defines. A malicious embedded controller could return an inaccurate port count (up to 255) resulting in an out of bounds write and subsequent memory corruption. Update helper functions in cros_usbpd-charger to limit port counts to EC_USB_PD_MAX_PORTS.

In the Linux kernel, the following vulnerability has been resolved: power: supply: lp8727: fix use-after-free in lp8727_release_irq() lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms pchg->work via schedule_delayed_work(). lp8727_release_irq() currently cancels the work before freeing the IRQ, so an IRQ delivered in between can re-arm the work through the threaded handler. After .remove returns the devm layer frees pchg while lp8727_delayed_func() may still run and dereference it. Free the IRQ first so the threaded handler is quiesced and can no longer queue work, then cancel the delayed work to drain the final generation. This issue was found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: terminate the strings from firmware The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and leaves the destination without a terminator. Those destinations are model_number, serial_number and oem_info, each BATTMGR_STRING_LEN and declared next to each other. They go out to user space as val->strval, which power_supply_format_property() prints with "%s", so a firmware string that fills the whole field makes that read run into the following members. Use strscpy() so the copy always terminates, the way the SM8350 path already does for the same field.

In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: quiesce delayed work before teardown The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself. rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled: rt9455_remove() workqueue cancel pwr_rdy_work cancel max_charging_time_work batt_presence_work queues max_charging_time_work cancel batt_presence_work return devres frees rt9455_info max_charging_time_work dereferences rt9455_info The IRQ also remains registered until devres cleanup and can queue more work after any of the cancellation calls. If rt9455_hw_init() fails after the IRQ has been requested, probe returns without cancelling work that may already have been queued. A pending callback can then access rt9455_info after it has been freed. Register rt9455_cancel_all_delayed_works() through devm_add_action_or_reset() right after devm_power_supply_register(). devres invokes the action in reverse registration order, after the managed IRQ has been freed and before rt9455_info is released, so the delayed works are drained in both rt9455_remove() and the probe error path. Cancel pwr_rdy_work and batt_presence_work before max_charging_time_work because both can queue the latter. This issue was found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: s390/percpu: Fix MVIY_PERCPU() with older binutils Commit a737737cdb9c ("s390/percpu: Infrastructure for more efficient this_cpu operations") introduced MVIY_PERCPU(), which stringifies arguments that are already C string literals. This generates an assembler macro invocation with whitespace-separated quoted arguments: GEN_MVIY "459712" "%r3" GNU as versions prior to binutils 2.39 drop the separating whitespace between quoted macro arguments during input scrubbing. They consequently parse the invocation as a single argument and emit repeated warnings: Warning: missing closing `"' The .ifc in GEN_MVIY never matches and GNU as exits successfully without emitting the mviy instruction. As a result, the interrupted per-CPU sequence is not marked in lowcore and the exception return path cannot repair the per-CPU address register after migration. All MVIY_PERCPU() callers pass C string literals. Use them directly and separate the assembler macro arguments with an explicit comma. The resulting invocation is: GEN_MVIY 459712, %r3 This form is unambiguous for GNU as and LLVM's integrated assembler. This behavior was fixed in GNU as from binutils 2.39, but Linux supports binutils 2.30.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Propagate partial completion length across ERP recovery dasd_default_erp_postaction() copies the timing and device state from the finished ERP request back to the original request but drops proc_bytes. A request that was partially completed, an ESE read of a not-yet-allocated track returns fewer bytes than requested, and then recovered through the ERP chain loses its partial-completion length. __dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole request instead of requeueing the remainder, silently returning zeroed data for the part that was never read. Carry proc_bytes over to the original request like the other per-request state.

In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-managed IOMMU object to qcom_iommu_devices before adding the IOMMU sysfs device and registering it with the IOMMU core. If iommu_device_sysfs_add() fails, probe returns with the object still on qcom_iommu_devices. The driver core then releases the devm allocation, leaving a dangling list entry that later list walks may dereference. If iommu_device_register() fails, the same dangling list entry remains and the sysfs device is left registered as well. Unwind the sysfs device and global list entry in reverse setup order on the corresponding failure paths.

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field tegra241_vintf_init_vsid() programs the guest-provided vSID into SID_MATCH, whose VIRT_SID field spans bits [20:1] with bit 0 as the match-enable flag. The HW therefore matches only a 20-bit Stream ID. The bound check rejects only virt_sid > UINT_MAX, which admits a value far wider than the field. The write "virt_sid << 1 | 0x1" then drops every bit above 20: a virt_sid of 0x80000000 lands as SID_MATCH = 0x1, a valid match on vSID 0, so the entry aliases the wrong Stream ID. Because vdev->virt_id is guest-controlled, a VMM can trigger it. Validate virt_sid against the field width with FIELD_MAX(), and program the register with FIELD_PREP() so the value and the field stay consistent.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix UAF in selftest IOPF reporting IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from group->pasid_array without synchronizing against PASID detach, then a concurrent iommu_report_device_fault() can dereference that borrowed handle's domain pointer after the detach erases the handle and frees the backing struct iommufd_attach_handle. TRIGGER_IOPF then dereferences the freed handle, causing a UAF. Fix by adding a iopf_rwsem in mock_dev to follow the expected design of a real driver. Hold its read side across the whole iommu_report_device_fault() call, and its write side around every path that attaches, detaches, or replaces a device domain. This can block new reports and drains in-flight reports before an old attach handle or the IOPF fault parameter can be removed. Also take the write side while registering a mock device, since it can invoke the mock driver's default-domain attach callback.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate level in perf mask ioctls isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the user-provided level as an index into perf_levels[] via _read_pp_level_info() and _read_bf_level_info(), but neither helper validates it first. The adjacent level-info helpers reject levels above max_level before reading the same per-level register block. Add the same bounds checks to the mask helpers, and reject disabled SST-PP levels in isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info(). This prevents out-of-bounds reads from the per-level offset table on invalid ioctl input.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate socket ID in clos_assoc ioctl isst_if_clos_assoc() validates the user-supplied socket_id with 'socket_id > topology_max_packages()', but isst_common.sst_inst[] is allocated with topology_max_packages() entries, so the valid index range is [0, topology_max_packages()). The '>' comparison lets socket_id == topology_max_packages() pass and index one entry past the array. In addition, isst_common.sst_inst[socket_id] is NULL for an in-range package that has no bound TPMI SST instance, and the pointer is used without a NULL check. Both the out-of-bounds entry and the NULL pointer are then dereferenced by map_partition_power_domain_id() and the following power_domain_info access. Reject socket_id >= topology_max_packages() and a NULL sst_inst, matching the checks already performed by get_instance().