CVE Database

A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) packets of Cisco IOS XE Wireless Controller Software for the Catalyst CW9800 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of a malformed CAPWAP packet. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition.

A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause BOOTP packets to be forwarded between VLANs, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of BOOTP packets on Cisco Catalyst 9000 Series Switches. An attacker could exploit this vulnerability by sending BOOTP request packets to an affected device. A successful exploit could allow an attacker to forward BOOTP packets from one VLAN to another, resulting in BOOTP VLAN leakage and potentially leading to high CPU utilization. This makes the device unreachable (either through console or remote management) and unable to forward traffic, resulting in a DoS condition. Note: This vulnerability can be exploited with either unicast or broadcast BOOTP packets. There are workarounds that address this vulnerability.

A vulnerability in the Internet Key Exchange version 2 (IKEv2) feature of Cisco IOS Software, Cisco IOS XE Software, Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit of Cisco IOS Software and IOS XE Software could allow the attacker to cause the affected device to reload, resulting in a DoS condition. A successful exploit of Cisco Secure Firewall ASA Software and Secure FTD Software could allow the attacker to partially exhaust system memory, resulting in system instability, such as the inability to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the TLS library of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust the available memory of an affected device. This vulnerability is due to improper management of memory resources during TLS connection setup. An attacker could exploit this vulnerability by repeatedly triggering the conditions that cause the memory increase. This could be done in a variety of ways, such as by repeatedly attempting Extensible Authentication Protocol (EAP) authentication when local EAP is enabled on an affected device or by using a machine-in-the-middle attack and resetting TLS connections between the affected device and other devices. A successful exploit could allow the attacker to exhaust the available memory on an affected device, resulting in an unexpected reload and a denial of service (DoS) condition.

OpenCart Core 4.0.2.3 contains a SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the 'search' parameter. Attackers can send GET requests to the product search endpoint with malicious 'search' values to extract sensitive database information using boolean-based blind or time-based blind SQL injection techniques.

Kiteworks is a private data network (PDN). Versions 9.2.0 and 9.2.1 of Kiteworks Core have an access control vulnerability that allows authenticated users to access unauthorized content. Upgrade Kiteworks Core to version 9.2.2 or later to receive a patch.

A SQL Injection vulnerability has been found in Support Board v3.7.7. This vulnerability allows an attacker to retrieve, create, update and delete database via 'calls[0][message_ids][]' parameter in '/supportboard/include/ajax.php' endpoint.

A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain. This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1. BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected.

If a BIND resolver is performing DNSSEC validation and encounters a maliciously crafted zone, the resolver may consume excessive CPU. Authoritative-only servers are generally unaffected, although there are circumstances where authoritative servers may make recursive queries (see: https://kb.isc.org/docs/why-does-my-authoritative-server-make-recursive-queries). This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.46, 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.46-S1, and 9.20.9-S1 through 9.20.20-S1.

Ericsson Indoor Connect 8855 versions prior to 2025.Q3 contains an Improper Filtering of Special Elements vulnerability which, if exploited, can lead to unauthorized modification of certain information

A stack-based buffer overflow vulnerability in the P2P API service in BS Producten Petcam with firmware 33.1.0.0818 allows unauthenticated attackers within network range to overwrite the instruction pointer and achieve Remote Code Execution (RCE) by sending a specially crafted HTTP request.

A buffer overflow vulnerability in the dgiot binary in LSC Smart Indoor IP Camera V7.6.32. The flaw exists in the handling of the Time Zone (TZ) parameter within the ONVIF configuration interface. The time zone (TZ) parameter does not have its length properly validated before being copied into a fixed-size buffer using the insecure strcpy function.

An issue in Eufy Homebase 2 version 3.3.4.1h allows a local attacker to obtain sensitive information via the cryptographic scheme.

When a certificate and its private key are installed in the Windows machine certificate store using Network and Security tool, access rights to the private key are unnecessarily granted to the operator group. * Installations based on Panorama Suite 2025 (25.00.004) are vulnerable unless update PS-2500-00-0357 (or higher) is installed * Installations based on Panorama Suite 2025 Updated Dec. 25 (25.10.007) are not vulnerable Please refer to security bulletin BS-036, available on the Panorama CSIRT website: https://my.codra.net/en-gb/csirt.

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ Currently the code attempts to accept requests regardless of the command identifier which may cause multiple requests to be marked as pending (FLAG_DEFER_SETUP) which can cause more than L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer causing an overflow. The spec is quite clear that the same identifier shall not be used on subsequent requests: 'Within each signaling channel a different Identifier shall be used for each successive request or indication.' https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d So this attempts to check if there are any channels pending with the same identifier and rejects if any are found.

In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: Fix race condition in peer_mep deletion When a peer MEP is being deleted, cancel_delayed_work_sync() is called on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in softirq context under rcu_read_lock (without RTNL) and can re-schedule ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync() returning and kfree_rcu() being called. The following is a simple race scenario: cpu0 cpu1 mep_delete_implementation() cancel_delayed_work_sync(ccm_rx_dwork); br_cfm_frame_rx() // peer_mep still in hlist if (peer_mep->ccm_defect) ccm_rx_timer_start() queue_delayed_work(ccm_rx_dwork) hlist_del_rcu(&peer_mep->head); kfree_rcu(peer_mep, rcu); ccm_rx_work_expired() // on freed peer_mep To prevent this, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync() in both peer MEP deletion paths, so that subsequent queue_delayed_work() calls from br_cfm_frame_rx() are silently rejected. The cc_peer_disable() helper retains cancel_delayed_work_sync() because it is also used for the CC enable/disable toggle path where the work must remain re-schedulable.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flowtable after rcu grace period on error Call synchronize_rcu() after unregistering the hooks from error path, since a hook that already refers to this flowtable can be already registered, exposing this flowtable to packet path and nfnetlink_hook control plane. This error path is rare, it should only happen by reaching the maximum number hooks or by failing to set up to hardware offload, just call synchronize_rcu(). There is a check for already used device hooks by different flowtable that could result in EEXIST at this late stage. The hook parser can be updated to perform this check earlier to this error path really becomes rarely exercised. Uncovered by KASAN reported as use-after-free from nfnetlink_hook path when dumping hooks.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed.

In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson <sean.anderson@linux.dev>

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe() devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put.

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure.

In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Compare MACs in constant time To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq().

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path.

In the Linux kernel, the following vulnerability has been resolved: x86/fred: Correct speculative safety in fred_extint() array_index_nospec() is no use if the result gets spilled to the stack, as it makes the believed safe-under-speculation value subject to memory predictions. For all practical purposes, this means array_index_nospec() must be used in the expression that accesses the array. As the code currently stands, it's the wrong side of irqentry_enter(), and 'index' is put into %ebp across the function call. Remove the index variable and reposition array_index_nospec(), so it's calculated immediately before the array access.