CVE Database

Heap buffer overflow in CertFromX509 via AuthorityKeyIdentifier size confusion. A heap buffer overflow occurs when converting an X.509 certificate internally due to incorrect size handling of the AuthorityKeyIdentifier extension.

In wolfSSL, ARIA-GCM cipher suites used in TLS 1.2 and DTLS 1.2 reuse an identical 12-byte GCM nonce for every application-data record. Because wc_AriaEncrypt is stateless and passes the caller-supplied IV verbatim to the MagicCrypto SDK with no internal counter, and because the explicit IV is zero-initialized at session setup and never incremented in non-FIPS builds. This vulnerability affects wolfSSL builds configured with --enable-aria and the proprietary MagicCrypto SDK (a non-default, opt-in configuration required for Korean regulatory deployments). AES-GCM is not affected because wc_AesGcmEncrypt_ex maintains an internal invocation counter independently of the call-site guard.

nimiq-blockchain provides persistent block storage for Nimiq's Rust implementation. In 1.3.0 and earlier, block timestamp validation enforces that timestamp >= parent.timestamp for non-skip blocks and timestamp == parent.timestamp + MIN_PRODUCER_TIMEOUT for skip blocks, but there is no visible upper bound check against the wall clock. A malicious block-producing validator can set block timestamps arbitrarily far in the future. This directly affects reward calculations via Policy::supply_at() and batch_delay() in blockchain/src/reward.rs, inflating the monetary supply beyond the intended emission schedule.

WordPress adivaha Travel Plugin 2.3 contains a time-based blind SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the 'pid' GET parameter. Attackers can send requests to the /mobile-app/v3/ endpoint with crafted 'pid' values using XOR-based payloads to extract sensitive database information or cause denial of service.

A vulnerability was determined in FoundationAgents MetaGPT up to 0.8.1. The affected element is the function Bash.run in the library metagpt/tools/libs/terminal.py. This manipulation causes os command injection. The attack is possible to be carried out remotely. The project was informed of the problem early through a pull request but has not reacted yet.

A vulnerability was found in FoundationAgents MetaGPT up to 0.8.1. Impacted is the function get_mime_type of the file metagpt/utils/common.py. The manipulation results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through a pull request but has not reacted yet.

A vulnerability has been found in FoundationAgents MetaGPT up to 0.8.1. This issue affects the function Terminal.run_command in the library metagpt/tools/libs/terminal.py. The manipulation leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The identifier of the patch is d04ffc8dc67903e8b327f78ec121df5e190ffc7b. Applying a patch is the recommended action to fix this issue.

A low-privileged remote attacker can send Modbus packets to manipulate register values that are inputs to the odorant injection logic such that too much or too little odorant is injected into a gas line.

OpenPLC_V3 REST API endpoint checks for JWT presence but never verifies the caller's role. Any authenticated user with role=user can delete any other user, including administrators, by specifying their user ID or they can create new accounts with role=admin, escalating to full administrator access.

HDF5 is software for managing data. In 1.14.1-2 and earlier, a heap-use-after-free was found in the h5dump helper utility. An attacker who can supply a malicious h5 file can trigger a heap use-after-free. The freed object is referenced in a memmove call from H5T__conv_struct. The original object was allocated by H5D__typeinfo_init_phase3 and freed by H5D__typeinfo_term.

Insertion of Sensitive Information into Log File vulnerability in the cloud membership for clustering component of Apache Tomcat exposed the Kubernetes bearer token. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.20, from 10.1.0-M1 through 10.1.53, from 9.0.13 through 9.0.116. Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.

Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor. This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116. Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue.

Improper Encoding or Escaping of Output vulnerability in the JsonAccessLogValve component of Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.20, from 10.1.0-M1 through 10.1.53, from 9.0.40 through 9.0.116. Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117 , which fix the issue.

The pstrip64.sys driver in EnTech Taiwan PowerStrip <=3.90.736 allows local users to escalate privileges to SYSTEM via a crafted IOCTL request enabling unprivileged users to map arbitrary physical memory into their address space and modify critical kernel structures.

Padding Oracle vulnerability in Apache Tomcat's EncryptInterceptor with default configuration. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.0.0-M1 through 10.1.52, from 9.0.13 through 9..115, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109. Users are recommended to upgrade to version 11.0.19, 10.1.53 and 9.0.116, which fixes the issue.

Configured cipher preference order not preserved vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.16 through 11.0.18, from 10.1.51 through 10.1.52, from 9.0.114 through 9.0.115. Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue.

Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in Apache Tomcat via invalid chunk extension. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.1.0-M1 through 10.1.52, from 9.0.0.M1 through 9.0.115, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other, unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.20, 10.1.52 or 9.0.116, which fix the issue.

OpenPLC_V3 is vulnerable to a Plaintext Storage of a Password vulnerability that could allow an attacker to retrieve credentials and access sensitive information.

Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. The primary consequence of this bug is that bytes in the host's address space can be stored/read from. This is only applicable to the 16 bytes before linear memory, however, as the only significant return value of table.grow that can be misinterpreted is -1. The bytes before linear memory are, by default, unmapped memory. Wasmtime will detect this fault and abort the process, however, because wasm should not be able to access these bytes. Overall this this bug in Winch represents a DoS vector by crashing the host process, a correctness issue within Winch, and a possible leak of up to 16-bytes before linear memory. Wasmtime's default compiler is Cranelift, not Winch, and Wasmtime's default settings are to place guard pages before linear memory. This means that Wasmtime's default configuration is not affected by this issue, and when explicitly choosing Winch Wasmtime's otherwise default configuration leads to a DoS. Disabling guard pages before linear memory is required to possibly leak up to 16-bytes of host data. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a vulnerability where the compilation of the table.fill instruction can result in a host panic. This means that a valid guest can be compiled with Winch, on any architecture, and cause the host to panic. This represents a denial-of-service vulnerability in Wasmtime due to guests being able to trigger a panic. The specific issue is that a historical refactoring changed how compiled code referenced tables within the table.* instructions. This refactoring forgot to update the Winch code paths associated as well, meaning that Winch was using the wrong indexing scheme. Due to the feature support of Winch the only problem that can result is tables being mixed up or nonexistent tables being used, meaning that the guest is limited to panicking the host (using a nonexistent table), or executing spec-incorrect behavior and modifying the wrong table. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a possible panic which can happen when a flags-typed component model value is lifted with the Val type. If bits are set outside of the set of flags the component model specifies that these bits should be ignored but Wasmtime will panic when this value is lifted. This panic only affects wasmtime's implementation of lifting into Val, not when using the flags! macro. This additionally only affects flags-typed values which are part of a WIT interface. This has the risk of being a guest-controlled panic within the host which Wasmtime considers a DoS vector. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.

A flaw has been found in FoundationAgents MetaGPT up to 0.8.1. This vulnerability affects the function ActionNode.xml_fill of the file metagpt/actions/action_node.py of the component XML Handler. Executing a manipulation can lead to improper neutralization of directives in dynamically evaluated code. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through a pull request but has not reacted yet.

A vulnerability was detected in FoundationAgents MetaGPT up to 0.8.1. This affects the function check_solution of the component HumanEvalBenchmark/MBPPBenchmark. Performing a manipulation results in code injection. The attack may be initiated remotely. The exploit is now public and may be used. The project was informed of the problem early through a pull request but has not reacted yet.

Rapid7 Velociraptor versions prior to 0.76.2 contain an improper input validation vulnerability in the client monitoring message handler on the Velociraptor server (primarily Linux) that allows an authenticated remote attacker to write to arbitrary internal server queues via a crafted monitoring message with a malicious queue name. The server handler that receives client monitoring messages does not sufficiently validate the queue name supplied by the client, allowing a rogue client to write arbitrary messages to privileged internal queues. This may lead to remote code execution on the Velociraptor server. Rapid7 Hosted Velociraptor instances are not affected by this vulnerability.

web3.py allows you to interact with the Ethereum blockchain using Python. From 6.0.0b3 to before 7.15.0 and 8.0.0b2, web3.py implements CCIP Read / OffchainLookup (EIP-3668) by performing HTTP requests to URLs supplied by smart contracts in offchain_lookup_payload["urls"]. The implementation uses these contract-supplied URLs directly (after {sender} / {data} template substitution) without any destination validation. CCIP Read is enabled by default (global_ccip_read_enabled = True on all providers), meaning any application using web3.py's .call() method is exposed without explicit opt-in. This results in Server-Side Request Forgery (SSRF) when web3.py is used in backend services, indexers, APIs, or any environment that performs eth_call / .call() against untrusted or user-supplied contract addresses. A malicious contract can force the web3.py process to issue HTTP requests to arbitrary destinations, including internal network services and cloud metadata endpoints. This vulnerability is fixed in 7.15.0 and 8.0.0b2.

BSV Ruby SDK is the Ruby SDK for the BSV blockchain. From 0.3.1 to before 0.8.2, BSV::Wallet::WalletClient#acquire_certificate persists certificate records to storage without verifying the certifier's signature over the certificate contents. In acquisition_protocol: 'direct', the caller supplies all certificate fields (including signature:) and the record is written to storage verbatim. In acquisition_protocol: 'issuance', the client POSTs to a certifier URL and writes whatever signature the response body contains, also without verification. An attacker who can reach either API (or who controls a certifier endpoint targeted by the issuance path) can forge identity certificates that subsequently appear authentic to list_certificates and prove_certificate.

BSV Ruby SDK is the Ruby SDK for the BSV blockchain. From 0.1.0 to before 0.8.2, BSV::Network::ARC's failure detection only recognises REJECTED and DOUBLE_SPEND_ATTEMPTED. ARC responses with txStatus values of INVALID, MALFORMED, MINED_IN_STALE_BLOCK, or any ORPHAN-containing extraInfo / txStatus are silently treated as successful broadcasts. Applications that gate actions on broadcaster success are tricked into trusting transactions that were never accepted by the network. This vulnerability is fixed in 0.8.2.

basic-ftp is an FTP client for Node.js. Prior to 5.2.1, basic-ftp allows FTP command injection via CRLF sequences (\r\n) in file path parameters passed to high-level path APIs such as cd(), remove(), rename(), uploadFrom(), downloadTo(), list(), and removeDir(). The library's protectWhitespace() helper only handles leading spaces and returns other paths unchanged, while FtpContext.send() writes the resulting command string directly to the control socket with \r\n appended. This lets attacker-controlled path strings split one intended FTP command into multiple commands. This vulnerability is fixed in 5.2.1.