CVE Database

In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix use of completion ctx after free On admin queue completion handling, if the admin command completed with error we print data from the completion context. The issue is that we already freed the completion context in polling/interrupts handler which means we print data from context in an unknown state (it might be already used again). Change the admin submission flow so alloc/dealloc of the context will be symmetric and dealloc will be called after any potential use of the context.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)

In the Linux kernel, the following vulnerability has been resolved: spi: meson-spicc: Fix double-put in remove path meson_spicc_probe() registers the controller with devm_spi_register_controller(), so teardown already drops the controller reference via devm cleanup. Calling spi_controller_put() again in meson_spicc_remove() causes a double-put.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) Protect regulator operations with mutex The regulator operations pmbus_regulator_get_voltage(), pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage() access PMBus registers and shared data but were not protected by the update_lock mutex. This could lead to race conditions. However, adding mutex protection directly to these functions causes a deadlock because pmbus_regulator_notify() (which calls regulator_notifier_call_chain()) is often called with the mutex already held (e.g., from pmbus_fault_handler()). If a regulator callback then calls one of the now-protected voltage functions, it will attempt to acquire the same mutex. Rework pmbus_regulator_notify() to utilize a worker function to send notifications outside of the mutex protection. Events are stored as atomics in a per-page bitmask and processed by the worker. Initialize the worker and its associated data during regulator registration, and ensure it is cancelled on device removal using devm_add_action_or_reset(). While at it, remove the unnecessary include of linux/of.h.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove().

In the Linux kernel, the following vulnerability has been resolved: io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check __io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second half of the SQE would be past the end of the sq_sqes array. The current check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented when a 128-byte SQE is encountered, not on every iteration. The actual array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask (the last slot) while the wrap check passes. Fix by checking sq_idx directly. Keep the sq_head increment so the loop still skips the second half of the 128-byte SQE on the next iteration.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: always keep track of remap prev/next During 3D workload, user is reporting hitting: [ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925 [ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy) [ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe] [ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282 [ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000 [ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000 [ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380 [ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380 [ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000 [ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0 [ 413.362088] PKRU: 55555554 [ 413.362089] Call Trace: [ 413.362092] <TASK> [ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe] Which seems to hint that the vma we are re-inserting for the ops unwind is either invalid or overlapping with something already inserted in the vm. It shouldn't be invalid since this is a re-insertion, so must have worked before. Leaving the likely culprit as something already placed where we want to insert the vma. Following from that, for the case where we do something like a rebind in the middle of a vma, and one or both mapped ends are already compatible, we skip doing the rebind of those vma and set next/prev to NULL. As well as then adjust the original unmap va range, to avoid unmapping the ends. However, if we trigger the unwind path, we end up with three va, with the two ends never being removed and the original va range in the middle still being the shrunken size. If this occurs, one failure mode is when another unwind op needs to interact with that range, which can happen with a vector of binds. For example, if we need to re-insert something in place of the original va. In this case the va is still the shrunken version, so when removing it and then doing a re-insert it can overlap with the ends, which were never removed, triggering a warning like above, plus leaving the vm in a bad state. With that, we need two things here: 1) Stop nuking the prev/next tracking for the skip cases. Instead relying on checking for skip prev/next, where needed. That way on the unwind path, we now correctly remove both ends. 2) Undo the unmap va shrinkage, on the unwind path. With the two ends now removed the unmap va should expand back to the original size again, before re-insertion. v2: - Update the explanation in the commit message, based on an actual IGT of triggering this issue, rather than conjecture. - Also undo the unmap shrinkage, for the skip case. With the two ends now removed, the original unmap va range should expand back to the original range. v3: - Track the old start/range separately. vma_size/start() uses the va info directly. (cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leaks and NULL deref in smb2_lock() smb2_lock() has three error handling issues after list_del() detaches smb_lock from lock_list at no_check_cl: 1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK path, goto out leaks smb_lock and its flock because the out: handler only iterates lock_list and rollback_list, neither of which contains the detached smb_lock. 2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out leaks smb_lock and flock for the same reason. The error code returned to the dispatcher is also stale. 3) In the rollback path, smb_flock_init() can return NULL on allocation failure. The result is dereferenced unconditionally, causing a kernel NULL pointer dereference. Add a NULL check to prevent the crash and clean up the bookkeeping; the VFS lock itself cannot be rolled back without the allocation and will be released at file or connection teardown. Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before the if(!rc) check in the UNLOCK branch so all exit paths share one free site, and by freeing smb_lock and flock before goto out in the non-UNLOCK branch. Propagate the correct error code in both cases. Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding a NULL check for locks_free_lock(rlock) in the shared cleanup. Found via call-graph analysis using sqry.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: do not expire session on binding failure When a multichannel session binding request fails (e.g. wrong password), the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED. However, during binding, sess points to the target session looked up via ksmbd_session_lookup_slowpath() -- which belongs to another connection's user. This allows a remote attacker to invalidate any active session by simply sending a binding request with a wrong password (DoS). Fix this by skipping session expiration when the failed request was a binding attempt, since the session does not belong to the current connection. The reference taken by ksmbd_session_lookup_slowpath() is still correctly released via ksmbd_user_session_put().

In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup.

In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done.

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: only publish mode_data after clone setup iptfs_clone_state() stores x->mode_data before allocating the reorder window. If that allocation fails, the code frees the cloned state and returns -ENOMEM, leaving x->mode_data pointing at freed memory. The xfrm clone unwind later runs destroy_state() through x->mode_data, so the failed clone path tears down IPTFS state that clone_state() already freed. Keep the cloned IPTFS state private until all allocations succeed so failed clones leave x->mode_data unset. The destroy path already handles a NULL mode_data pointer.

In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Fix handling of host controlled 'quote' buffer length Validate host controlled value `quote_buf->out_len` that determines how many bytes of the quote are copied out to guest userspace. In TDX environments with remote attestation, quotes are not considered private, and can be forwarded to an attestation server. Catch scenarios where the host specifies a response length larger than the guest's allocation, or otherwise races modifying the response while the guest consumes it. This prevents contents beyond the pages allocated for `quote_buf` (up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace, and possibly forwarded in attestation requests. Recall that some deployments want per-container configs-tsm-report interfaces, so the leak may cross container protection boundaries, not just local root.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Fix double free in dma-buf feature The error path through vfio_pci_core_feature_dma_buf() ignores its own advice to only use dma_buf_put() after dma_buf_export(), instead falling through the entire unwind chain. In the unlikely event that we encounter file descriptor exhaustion, this can result in an unbalanced refcount on the vfio device and double free of allocated objects. Avoid this by moving the "put" directly into the error path and return the errno rather than entering the unwind chain.

In the Linux kernel, the following vulnerability has been resolved: erofs: add GFP_NOIO in the bio completion if needed The bio completion path in the process context (e.g. dm-verity) will directly call into decompression rather than trigger another workqueue context for minimal scheduling latencies, which can then call vm_map_ram() with GFP_KERNEL. Due to insufficient memory, vm_map_ram() may generate memory swapping I/O, which can cause submit_bio_wait to deadlock in some scenarios. Trimmed down the call stack, as follows: f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!! Use memalloc_noio_{save,restore}() to wrap up this path.

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done() A malicious or compromised VIO server can return a num_written value in the discover targets MAD response that exceeds max_targets. This value is stored directly in vhost->num_targets without validation, and is then used as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which is only allocated for max_targets entries. Indices at or beyond max_targets access kernel memory outside the DMA-coherent allocation. The out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI MADs that are sent back to the VIO server, leaking kernel memory. Fix by clamping num_written to max_targets before storing it.

In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable.

In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid.

In the Linux kernel, the following vulnerability has been resolved: xfs: avoid dereferencing log items after push callbacks After xfsaild_push_item() calls iop_push(), the log item may have been freed if the AIL lock was dropped during the push. Background inode reclaim or the dquot shrinker can free the log item while the AIL lock is not held, and the tracepoints in the switch statement dereference the log item after iop_push() returns. Fix this by capturing the log item type, flags, and LSN before calling xfsaild_push_item(), and introducing a new xfs_ail_push_class trace event class that takes these pre-captured values and the ailp pointer instead of the log item pointer.

In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.

In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer.

In the Linux kernel, the following vulnerability has been resolved: ext4: validate p_idx bounds in ext4_ext_correct_indexes ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code.

In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix read abandonment during retry Under certain circumstances, all the remaining subrequests from a read request will get abandoned during retry. The abandonment process expects the 'subreq' variable to be set to the place to start abandonment from, but it doesn't always have a useful value (it will be uninitialised on the first pass through the loop and it may point to a deleted subrequest on later passes). Fix the first jump to "abandon:" to set subreq to the start of the first subrequest expected to need retry (which, in this abandonment case, turned out unexpectedly to no longer have NEED_RETRY set). Also clear the subreq pointer after discarding superfluous retryable subrequests to cause an oops if we do try to access it.

A flaw was found in camel-infinispan. This vulnerability involves unsafe deserialization in the ProtoStream remote aggregation repository. A remote attacker with low privileges could exploit this by sending specially crafted data, leading to arbitrary code execution. This allows the attacker to gain full control over the affected system, impacting its confidentiality, integrity, and availability.