CVE Database

Russh is a Rust SSH client & server library. Prior to version 0.60.1, a pre-authentication denial-of-service vulnerability exists in the server's keyboard-interactive authentication handler. A malicious client can crash any russh-based server that implements keyboard-interactive auth (e.g., for 2FA/TOTP) with a single malformed packet, requiring no credentials. This issue has been patched in version 0.60.1.

An issue exists in Amazon Redshift JDBC Driver versions prior to 2.2.2. Under certain conditions, the driver could load and execute arbitrary classes when processing JDBC connection URL parameters. An actor who can influence the connection URL could potentially execute code in the application context, provided a suitable class is available on the application's classpath. To mitigate this issue, users should upgrade to version 2.2.2 or later.

A chmod call in the cPanel Nova plugin's Cpanel::Nova::Connector follows symlinks, allowing setting root permissions on arbitrary system files or directories. That can cause DoS or local privilege escalation when an authenticated cPanel user places a symlink at a user-controlled legacy Nova path under their home directory.

Insufficient input validation of the `plugin` parameter of the `create_user` plugin allows arbitrary Perl code execution on behalf of the already authenticated account's system user.

Insufficient input validation of the feature file name in `feature::LOADFEATUREFILE` adminbin call can cause arbitrary file read when a relative file path is passed.

Crypt::PasswdMD5 versions through 1.42 for Perl generates insecure random values for salts. The built-in rand function is predictable, and unsuitable for cryptography.

Inefficient Algorithmic Complexity vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via quadratic fragment-name uniqueness validation. 'Elixir.Absinthe.Phase.Document.Validation.UniqueFragmentNames':run/2 iterates over all fragments and for each one calls duplicate?/2, which evaluates Enum.count(fragments, &(&1.name == name)) — a full linear scan of the fragment list. The result is O(N²) comparisons per document, where N is the number of fragment definitions supplied by the caller. Because input.fragments is built directly from the GraphQL query body, N is fully attacker-controlled. A minimum-size fragment definition is roughly 16 bytes, so a ~1 MB document carries ~60,000 fragments and forces ~3.6 × 10⁹ comparisons inside this single validation phase. No authentication, schema knowledge, or special configuration is required. This issue affects absinthe: from 1.2.0 before 1.10.2.

Allocation of Resources Without Limits or Throttling vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via atom table exhaustion when parsing attacker-controlled GraphQL SDL. Multiple Blueprint.Draft.convert/2 implementations in Absinthe's SDL language modules call String.to_atom/1 on attacker-controlled names from parsed GraphQL SDL documents, including directive names, field names, type names, and argument names. Because atoms are never garbage-collected and the BEAM atom table has a fixed limit (default 1,048,576), each unique name permanently consumes one slot. An attacker can exhaust the atom table by submitting SDL documents containing enough unique names, causing the Erlang VM to abort with system_limit and taking down the entire node. Any application that passes attacker-controlled GraphQL SDL through Absinthe's parser is exposed — for example, a schema-upload endpoint, a federation gateway that ingests remote SDL, or any developer tool that runs the parser over user-supplied documents. This issue affects absinthe: from 1.5.0 before 1.10.2.

i18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. Prior to version 3.9.3, i18next-http-middleware passes the user-controlled lng and ns values from getResourcesHandler directly into i18next.services.backendConnector.load(languages, namespaces, …) without any sanitization. Depending on which backend is configured, the unvalidated path segments enable either path traversal or SSRF. This issue has been patched in version 3.9.3.

locize is a localization platform that connects code and i18n setup. Prior to version 4.0.21, the locize client SDK registers a window.addEventListener("message", …) handler that dispatches to registered internal handlers (editKey, commitKey, commitKeys, isLocizeEnabled, requestInitialize, …) without validating event.origin. The pre-patch listener in src/api/postMessage.js gates dispatch on event.data.sender === "i18next-editor-frame" — that value sits inside the attacker-controlled message payload, not the browser-enforced origin. Any web page that could embed or be embedded by a locize-enabled host — an iframe on a third-party page, a window.open-ed victim, a parent frame reaching down — could send a crafted postMessage and trigger the internal handlers. This issue has been patched in version 4.0.21.

OmniFaces is a utility library for Faces. Prior to versions 1.14.2, 2.7.32, 3.14.16, 4.7.5, and 5.2.3, there is a server-side EL injection leading to Remote Code Execution (RCE). This affects applications that use CDNResourceHandler with a wildcard CDN mapping (e.g. libraryName:*=https://cdn.example.com/*). An attacker can craft a resource request URL containing an EL expression in the resource name, which is evaluated server-side. This issue has been patched in versions 1.14.2, 2.7.32, 3.14.16, 4.7.5, and 5.2.3.

i18next-fs-backend is a backend layer for i18next using in Node.js and for Deno to load translations from the filesystem. Prior to version 2.6.4, i18next-fs-backend substitutes the lng and ns options directly into the configured loadPath / addPath templates and then read / write the resulting file from disk. The interpolation is unencoded and unvalidated, so a crafted lng or ns value — containing .., a path separator, a control character, a prototype key, or simply an unexpectedly long string — allows an attacker who can influence either value to read or overwrite files outside the intended locale directory. When lng / ns are derived from untrusted input (request-scoped i18next instances behind an HTTP layer such as i18next-http-middleware, or any framework that lets the end user pick the language via query string, cookie, or header), a single request such as ?lng=../../../../etc/passwd causes the backend to attempt to read that path. This issue has been patched in version 2.6.4.

18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. Versions prior to 3.9.3 allow an unauthenticated HTTP client to pollute Object.prototype in the Node.js process hosting the middleware, via two unvalidated entry points that reach internal object-key writes: getResourcesHandler and missingKeyHandler. This can break authorisation checks (if (user.isAdmin) returning true for any user), cause type-confusion DoS, and depending on downstream code it can be chained into RCE.

i18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. Prior to version 3.9.3, i18next-http-middleware wrote user-controlled language values into the Content-Language response header after passing them through utils.escape(), which is an HTML-entity encoder that does not strip carriage return, line feed, or other control characters. When the application used an older i18next (< 19.5.0) that still exercised the backward-compatibility fallback at LanguageDetector.js:100 or otherwise produced a raw detected value, CRLF sequences in the attacker-controlled lng parameter reached res.setHeader('Content-Language', ...) verbatim. This issue has been patched in version 3.9.3.

Akamai Guardicore Platform Agent (GPA) and Zero Trust Client on Linux and macOS allow TOCTOU-based local privilege escalation. The GPA service creates an IPC socket in the world-writable /tmp directory. It accepts unauthenticated IPC control messages. This enables a TOCTOU vulnerability in the HandleSaveLogs() function of the GPA service, by creating a log file and manipulating it into a symlink that points to the targeted path; this can allow an unprivileged local user to make arbitrary root-owned files world-writable. In addition, a diagnostic collection tool (gimmelogs) running with root privileges was vulnerable to command injection from the dbstore, offering a second privilege escalation vector. (On Windows, gimmelogs does not have command injection but does allow writing a ZIP archive to an unintended location.) This affects Akamai Guardicore Platform Agent 7.0 through 7.3.1 and Akamai Zero Trust Client 6.0 through 6.1.5.

lwjson 1.8.1 contains an improper input validation vulnerability in the streaming JSON parser (lwjson_stream.c). The end-of-string detection logic incorrectly identifies escaped quote characters by only checking the immediately preceding character rather than counting consecutive backslashes, causing valid JSON strings ending with an escaped backslash (like "\\") to never terminate parsing. A remote attacker can send well-formed JSON to cause applications using lwjson_stream_parse() to hang indefinitely, resulting in denial of service.

An issue was discovered in kosma minmea 0.3.0. The minmea_scan functions format specifier copies NMEA field data to a caller-provided buffer without a size parameter. Applications using minmea_scan on untrusted input are vulnerable to a stack buffer overflow.

nanoMODBUS through v1.22.0 has a stack-based buffer overflow in recv_read_registers_res() in nanomodbus.c. When a client calls nmbs_read_holding_registers() or nmbs_read_input_registers(), the library writes register data from the server response to the caller-provided buffer based on the response's byte_count field before validating that byte_count matches the requested quantity. A malicious Modbus TCP server can send a response with byte_count=250 (125 registers) regardless of the requested quantity, causing up to 248 bytes of attacker-controlled data to overflow the buffer, potentially allowing remote code execution.

ZEBRA is a Zcash node written entirely in Rust. Prior to version 4.4.0, Zebra's block validator undercounts transparent signature operations against the 20000-sigop block limit (MAX_BLOCK_SIGOPS), allowing it to accept blocks that zcashd rejects with bad-blk-sigops. A miner who produces such a block can split the network: Zebra nodes follow the offending chain while zcashd nodes do not. This issue has been patched in version 4.4.0.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decrement re_receiving on the early exit paths In the event that rpcrdma_post_recvs() fails to create a work request (due to memory allocation failure, say) or otherwise exits early, we should decrement ep->re_receiving before returning. Otherwise we will hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and the completion will never be triggered. On a system with high memory pressure, this can appear as the following hung task: INFO: task kworker/u385:17:8393 blocked for more than 122 seconds. Tainted: G S E 6.19.0 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000 Workqueue: xprtiod xprt_autoclose [sunrpc] Call Trace: <TASK> __schedule+0x48b/0x18b0 ? ib_post_send_mad+0x247/0xae0 [ib_core] schedule+0x27/0xf0 schedule_timeout+0x104/0x110 __wait_for_common+0x98/0x180 ? __pfx_schedule_timeout+0x10/0x10 wait_for_completion+0x24/0x40 rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma] xprt_rdma_close+0x12/0x40 [rpcrdma] xprt_autoclose+0x5f/0x120 [sunrpc] process_one_work+0x191/0x3e0 worker_thread+0x2e3/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x10d/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x273/0x2b0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags.

In the Linux kernel, the following vulnerability has been resolved: net: spacemit: Fix error handling in emac_tx_mem_map() The DMA mappings were leaked on mapping error. Free them with the existing emac_free_tx_buf() function.

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior.

In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix double-free in remove() callback The driver uses devm_spi_register_controller() for registration, which automatically unregisters the controller via devm cleanup when the device is removed. The manual call to spi_unregister_controller() in the remove() callback can lead to a double-free. And to make sure controller is unregistered before DMA buffer is unmapped, switch to use spi_register_controller() in probe().

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: flush delayed work before removing DAIs and widgets When a sound card is unbound while a PCM stream is open, a use-after-free can occur in snd_soc_dapm_stream_event(), called from the close_delayed_work workqueue handler. During unbind, snd_soc_unbind_card() flushes delayed work and then calls soc_cleanup_card_resources(). Inside cleanup, snd_card_disconnect_sync() releases all PCM file descriptors, and the resulting PCM close path can call snd_soc_dapm_stream_stop() which schedules new delayed work with a pmdown_time timer delay. Since this happens after the flush in snd_soc_unbind_card(), the new work is not caught. soc_remove_link_components() then frees DAPM widgets before this work fires, leading to the use-after-free. The existing flush in soc_free_pcm_runtime() also cannot help as it runs after soc_remove_link_components() has already freed the widgets. Add a flush in soc_cleanup_card_resources() after snd_card_disconnect_sync() (after which no new PCM closes can schedule further delayed work) and before soc_remove_link_dais() and soc_remove_link_components() (which tear down the structures the delayed work accesses).

In the Linux kernel, the following vulnerability has been resolved: serial: caif: hold tty->link reference in ldisc_open and ser_release A reproducer triggers a KASAN slab-use-after-free in pty_write_room() when caif_serial's TX path calls tty_write_room(). The faulting access is on tty->link->port. Hold an extra kref on tty->link for the lifetime of the caif_serial line discipline: get it in ldisc_open() and drop it in ser_release(), and also drop it on the ldisc_open() error path. With this change applied, the reproducer no longer triggers the UAF in my testing.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix type confusion in bond_setup_by_slave() kernel BUG at net/core/skbuff.c:2306! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306 RSP: 0018:ffffc90004aff760 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900 RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780 R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0 Call Trace: <TASK> ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa54/0xc30 net/socket.c:2592 ___sys_sendmsg+0x190/0x1e0 net/socket.c:2646 __sys_sendmsg+0x170/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe1a0e6c1a9 When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond, bond_setup_by_slave() directly copies the slave's header_ops to the bond device: bond_dev->header_ops = slave_dev->header_ops; This causes a type confusion when dev_hard_header() is later called on the bond device. Functions like ipgre_header(), ip6gre_header(),all use netdev_priv(dev) to access their device-specific private data. When called with the bond device, netdev_priv() returns the bond's private data (struct bonding) instead of the expected type (e.g. struct ip_tunnel), leading to garbage values being read and kernel crashes. Fix this by introducing bond_header_ops with wrapper functions that delegate to the active slave's header_ops using the slave's own device. This ensures netdev_priv() in the slave's header functions always receives the correct device. The fix is placed in the bonding driver rather than individual device drivers, as the root cause is bond blindly inheriting header_ops from the slave without considering that these callbacks expect a specific netdev_priv() layout. The type confusion can be observed by adding a printk in ipgre_header() and running the following commands: ip link add dummy0 type dummy ip addr add 10.0.0.1/24 dev dummy0 ip link set dummy0 up ip link add gre1 type gre local 10.0.0.1 ip link add bond1 type bond mode active-backup ip link set gre1 master bond1 ip link set gre1 up ip link set bond1 up ip addr add fe80::1/64 dev bond1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid the out-of-bounds read.