CVE Database

In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded address parameter length sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP, and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer parameter is large enough to contain an embedded address parameter header, but does not verify that the embedded address parameter's declared length fits within the bounds of the outer parameter. Later, sctp_process_param() and sctp_process_asconf_param() extract the embedded address parameter and pass it to af->from_addr_param(), which uses the address parameter length to parse the variable-length address payload. A malformed peer can therefore advertise an embedded address parameter length that exceeds the remaining bytes in the enclosing parameter. Validate that addr_param->p.length does not exceed the space available after the sctp_addip_param header before processing the embedded address parameter. Reject malformed parameters when the embedded address length extends beyond the enclosing parameter bounds. This prevents out-of-bounds reads when parsing malformed parameters carried in INIT or ASCONF processing paths.

In the Linux kernel, the following vulnerability has been resolved: net: pfcp: allocate per-cpu tstats for PFCP netdevs PFCP uses dev_get_tstats64() as its ndo_get_stats64 callback, but pfcp_link_setup() does not request NETDEV_PCPU_STAT_TSTATS. The net core therefore leaves dev->tstats NULL for PFCP devices. Creating a PFCP rtnetlink device can immediately ask the new netdev for stats while building the RTM_NEWLINK notification. That reaches dev_get_tstats64() and dereferences the NULL dev->tstats pointer. Set pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS during PFCP link setup so the net core allocates the storage expected by dev_get_tstats64().

In the Linux kernel, the following vulnerability has been resolved: net: Stop leased rxq before uninstalling its memory provider netif_rxq_cleanup_unlease() tears down the memory provider that was installed on a physical RX queue through a netkit queue lease. It currently revokes the provider's DMA mappings before stopping the physical queue: __netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */ __netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */ This inverts the ordering used by the regular teardown paths (normal device unregister and the io_uring zcrx close path), which stop the queue before revoking the provider's mappings. With the physical queue still live, its NAPI can keep consuming net_iov entries from the page_pool alloc cache after the __netif_mp_uninstall_rxq() has already cleared their dma_addr, opening a window for the device to DMA to a stale or zero address. Fix it by swapping the two calls so the queue is stopped (and its NAPI quiesced) before the provider is uninstalled. No functional regression was observed across repeated runs of the nk_qlease.py HW selftest, which exercises the lease teardown path; this was tested against fbnic QEMU emulation.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: Don't make class passive twice update_vf() is called from two places for the same class during a single dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last packets while dequeuing: 1. The child calls qdisc_tree_reduce_backlog(), which, now that the child is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns the class passive (cl_nactive is decremented up the hierarchy). 2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time) to charge the dequeued bytes. On the second call the class is already passive, but its child qdisc is still empty, so update_vf() arms go_passive again: if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC) go_passive = 1; The leaf is then skipped by the cl_nactive == 0 check inside the loop, which does not clear go_passive, so the stale go_passive propagates to the parent and decrements its cl_nactive a second time. A parent that still has other active children is driven to cl_nactive == 0 and removed from the vttree, even though those siblings are still backlogged. They are never dequeued again and the qdisc stalls. Fix this by only arming go_passive when the class is actually active, so an already-passive class no longer triggers a second passive transition. The byte accounting (cl->cl_total += len) still runs for every ancestor, so dequeued bytes continue to be counted exactly once.

In the Linux kernel, the following vulnerability has been resolved: tipc: require net admin for TIPCv2 netlink mutators TIPCv2 registers mutating generic-netlink operations without admin permission flags. Generic netlink only checks CAP_NET_ADMIN when an operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local unprivileged process can currently change TIPC state through commands such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and bearer enable/disable. The legacy TIPC netlink API already checks netlink_net_capable(..., CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which maps to the same namespace-aware CAP_NET_ADMIN check that netlink_net_capable() performs, so the behaviour matches the legacy path and keeps working for CAP_NET_ADMIN holders in a non-initial user namespace (containers). A QEMU/KASAN repro run as uid/gid 65534 with zero effective capabilities previously succeeded in changing the network id and node identity, setting and flushing key material, and enabling/disabling a UDP bearer. With this patch applied the same operations fail with -EPERM.

In the Linux kernel, the following vulnerability has been resolved: tipc: prevent snt_unacked underflow on CONN_ACK tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count from the unsigned 16-bit send counter snt_unacked without checking that it does not exceed the number of messages actually outstanding: tsk->snt_unacked -= msg_conn_ack(hdr); msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK message. If the ack count is larger than snt_unacked, the subtraction wraps to a near-maximum value, leaving tsk_conn_cong() permanently true and starving the connection of further transmits. Validate the ACK count at the start of the CONN_ACK block and drop the message if it acknowledges more messages than are outstanding. A peer (or, for a local connection, the connected peer socket) can otherwise wedge a TIPC connection's send side by sending an oversized connection ack.

In the Linux kernel, the following vulnerability has been resolved: tipc: reject inverted service ranges from peer bindings tipc_update_nametbl() inserts a binding advertised by a peer node using the lower and upper service-range bounds taken directly from the wire, without checking that lower <= upper. The local bind path validates the ordering (tipc_uaddr_valid()), but the name-distribution path does not. A binding with lower > upper is inserted at the far end of the service-range rbtree (keyed on lower) where no lookup or withdrawal can ever match it (service_range_foreach_match() requires sr->lower <= end). The publication, its service_range node and the augmented rbtree entry are then leaked for the lifetime of the namespace, and there is no per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings. Reject inverted ranges in the network path as well. A peer node can otherwise leak unbounded binding-table memory by sending PUBLICATION items with lower > upper.

In the Linux kernel, the following vulnerability has been resolved: crypto: marvell/octeontx - fix DMA cleanup using wrong loop index The sg_cleanup path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one.

In the Linux kernel, the following vulnerability has been resolved: crypto: cavium/cpt - fix DMA cleanup using wrong loop index The sg_cleanup error path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one.

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix kernel heap address leak in bounce_error_event() The comment above bounce_error_event() documents that user clients should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded as variable-length data, while kernel clients should receive SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer. However, the implementation unconditionally uses SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw struct snd_seq_event pointer for all clients. When a bounce error event is delivered to a USER_CLIENT via snd_seq_read(), the kernel heap address in data.quote.event is exposed to userspace through copy_to_user() in the fixed-length branch. This is a distinct leak path from the one addressed by commit 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"), which sanitizes data.ext.ptr in the variable-length branch of snd_seq_read(). The bounce_error_event() leak uses fixed-length events that take the else branch where no sanitization occurs. Differentiate the bounce event by client type. For USER_CLIENT, send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE and data.ext pointing to the original event. The variable-length path in snd_seq_event_dup() copies the event data into chained cells, and snd_seq_expand_var_event() copies only the content -- never the pointer -- to userspace. For KERNEL_CLIENT, keep the existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted pointer.

In the Linux kernel, the following vulnerability has been resolved: iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length of the current scatterlist segment `s` is incorrectly assigned from the head entry `sg->length` instead of the current entry `s->length`. This typo causes all P2PDMA segments in the scatterlist to inherit the length of the first segment, leading to corrupted DMA lengths for multi- segment scatterlists. Fix this by using `s->length` instead of `sg->length`.

In the Linux kernel, the following vulnerability has been resolved: spi: xilinx: use FIFO occupancy register to determine buffer size The method the driver uses to determine the size of the FIFO has a problem. What it currently does is this: It stops the SPI hardware and writes to the TX FIFO register until TX FIFO FULL asserts in the status register. But the hardware does not only have the FIFO, it also has a shift register which can hold a byte. This can be seen, when writing a byte to the FIFO (while the SPI hardware is stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size of 16 for example, the current method returns a 17. This is a problem, at least when using the driver in irq mode. The same size determined for the TX FIFO is also assumed for the RX FIFO. When a SPI transaction wants to write the amount of the FIFO size or more bytes, the following happens, for example with 16 bytes FIFO size: The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and starts the SPI hardware and goes sleep. The hardware then shifts out 17 bytes (FIFO + shift register) and simultaneously reads bytes into the RX FIFO, but it only has 16 places, so it looses one byte. Then TX FIFO empty asserts, wakes the driver again, which has a fast path and reads 16 bytes from the RX FIFO, but before reading the last 17th byte (which is lost) it does this: sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); if (!(sr & XSPI_SR_RX_EMPTY_MASK)) { xilinx_spi_rx(xspi); rx_words--; } It reads the status register and checks if the RX FIFO is not empty. But it is empty in our case. So this check spins in a while loop forever locking the driver. This patch fixes the logic to determine the FIFO size.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach() In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for accessing p->targets[]. However, cxled->pos can be set to negative errno in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This causes the driver to use a negative index to access p->targets[], resulting in out-of-bounds access. Fix it by walking p->targets[] instead of using cxled->pos directly.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fill first free targets[] slot during auto-discovery Any invalid endpoint decoder pointer in the target array of an active region is not allowed by cxl driver. This means cxl driver always assumes the first p->nr_targets entries of the target array in an auto-assembly region are valid. However, there are scenarios that could leave NULL endpoint decoder pointer holes in the target array. 1. When cxl_cancel_auto_attach() removes an endpoint decoder from a target array, the target slot is set to NULL. If the removed endpoint decoder is not the last element in the target array, the target array will contain a NULL hole. 2. When a auto-assembly region removes an assigned endpoint decoder, if the removed endpoint decoder is not the last element in the target array, always remains a NULL hole in the target array. When a NULL pointer hole exists in a region's target array, it introduces two potential problems: 1. Access an endpoint decoder via a NULL pointer. it always trigger calltrace like that. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core] Call Trace: <TASK> cxl_region_attach+0xc50/0x2140 [cxl_core] cxl_add_to_region+0x321/0x2330 [cxl_core] discover_region+0x92/0x150 [cxl_port] device_for_each_child+0xf3/0x170 cxl_port_probe+0x150/0x200 [cxl_port] cxl_bus_probe+0x4f/0xa0 [cxl_core] really_probe+0x1c8/0x960 __driver_probe_device+0x323/0x450 driver_probe_device+0x45/0x120 __device_attach_driver+0x15d/0x280 bus_for_each_drv+0x10f/0x190 2. Not having enough valid endpoint decoders attached to an auto-assembly region. if an auto-assembly region is created with lock flag or assigned endpoint decoder with lock flag, which means assigned endpoint decoder will not be reset during detaching, they could re-attach to the auto-assembly region again. But cxl region driver relies on p->nr_targets to verify whether the required number of endpoint decoders has been attached, and NULL endpoint decoder pointers are still counted in that case. To fix above issues, adjust cxl_region_attach_auto() logic to find the first free target slot for endpoint decoder attachment, this ensures NULL holes in the target array are filled, rather than adding new endpoint decoders at the tail of the target array.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Block region delete during region creation Expand the range lock, rename it "regions_lock", to disable region deletion in the critical period between construct_region() and attach_target(), as well as the period between device_add() and registering the remove actions. Otherwise, userspace can confuse the kernel. It can violate the assumption the region stays registered through the completion of cxl_add_to_region(). It can violate the assumption that devm_add_action_or_reset() is working with a live 'struct cxl_region'. It is ok for the region to disappear outside of those windows as that mirrors device hotplug flows where the proper locks are held.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Resolve region deletion races Sungwoo noticed that the sysfs trigger to delete a region may try to delete a region multiple times. It also has no exclusion relative to the kernel releasing the region via CXL root device teardown. Instead of installing new cxl root devres actions per region, use the existing root decoder unregistration event to remove all remaining regions. An xarray of regions replaces a devres list of regions. This handles 3 separate issues with the old approach: 1/ sysfs users racing to delete the same region: no longer possible now that the regions_lock is held over the lookup and deletion. 2/ multiple actions triggering deletion of the same region: solved by erasing regions while holding @regions_lock, and only proceeding on successful erasure. 3/ userspace racing devres_release_all() to trigger the devres not found warning: solved by sysfs unregistration not requiring a release action

In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array.

In the Linux kernel, the following vulnerability has been resolved: handshake: Require admin permission for DONE command ACCEPT and DONE are the two downcalls of the handshake genl family, both intended for use by the trusted handshake agent (tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has no privilege check at all. The fd-lookup in handshake_nl_done_doit() only confirms that some pending handshake request exists for the supplied sockfd; it does not authenticate the sender. An unprivileged process that guesses or observes a valid sockfd can therefore submit a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel consumer to proceed as if the handshake succeeded. A non-zero status on a forged DONE tears down a legitimate in-flight handshake before tlshd can report its real result.

In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue.

In the Linux kernel, the following vulnerability has been resolved: tcp: clear sock_ops cb flags before force-closing a child socket A child socket inherits the listener's bpf_sock_ops_cb_flags via sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() / tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs without it. If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state() calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me(): WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550 RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799 Call Trace: <IRQ> tcp_done+0xba/0x250 net/ipv4/tcp.c:5095 tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787 tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926 tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164 </IRQ> The child is freed before it is ever established, so it should run no sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(), the common point for the IPv4, IPv6 and chtls forced-close paths and for the MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done() on a child that was never established too.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_dualpi2: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever dualpi2 drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though dualpi2 still has 1 packet on the queue and, thus, mistakenly deactivates the parent's class which leads to a null-ptr-deref: [ 101.427314][ T599] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI [ 101.427755][ T599] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 101.428048][ T599] CPU: 2 UID: 0 PID: 599 Comm: ping Not tainted 7.1.0-rc5-00284-gbce53c430ed7 #102 PREEMPT(full) [ 101.428400][ T599] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 101.428608][ T599] RIP: 0010:qfq_dequeue (net/sched/sch_qfq.c:1150) sch_qfq [ 101.428821][ T599] Code: 00 fc ff df 80 3c 02 00 0f 85 46 0c 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 2d 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b All code [ 101.429348][ T599] RSP: 0018:ffff8881110df4f0 EFLAGS: 00010216 [ 101.429541][ T599] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 101.429763][ T599] RDX: 0000000000000009 RSI: 00000024c0000000 RDI: ffff88811436c2b0 [ 101.429985][ T599] RBP: ffff88811436c000 R08: ffff88811436c280 R09: 1ffff11021277523 [ 101.430206][ T599] R10: 1ffff11021277526 R11: 1ffff11021277527 R12: 00000024c0000000 [ 101.430423][ T599] R13: ffff88811436c2b8 R14: 0000000000000048 R15: 0000000020000000 [ 101.430642][ T599] FS: 00007f61813e1c40(0000) GS:ffff8881691ef000(0000) knlGS:0000000000000000 [ 101.430913][ T599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.431100][ T599] CR2: 00005651650850a8 CR3: 000000010ca0b000 CR4: 0000000000750ef0 [ 101.431320][ T599] PKRU: 55555554 [ 101.431433][ T599] Call Trace: [ 101.431544][ T599] <TASK> [ 101.431628][ T599] __qdisc_run (net/sched/sch_generic.c:322 net/sched/sch_generic.c:427 net/sched/sch_generic.c:445) [ 101.431792][ T599] ? dev_qdisc_enqueue (./include/trace/events/qdisc.h:49 (discriminator 22) net/core/dev.c:4176 (discriminator 22)) [ 101.431941][ T599] __dev_queue_xmit (./include/net/pkt_sched.h:120 ./include/net/pkt_sched.h:117 net/core/dev.c:4292 net/core/dev.c:4831) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored.

In the Linux kernel, the following vulnerability has been resolved: net: mana: initialize gdma queue id to INVALID_QUEUE_ID mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj()) until mana_create_wq_obj() assigns the firmware-returned id. If creation fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing gc->cq_table[0] and silently breaking whichever real CQ owns that slot. Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then short-circuits cleanly.

In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up().

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: check skb_clone in control TX t7xx_port_ctrl_tx() clones each skb fragment before passing it to the port transmit path. The clone is used immediately to set cloned->len, so an skb_clone() failure results in a NULL pointer dereference. Check the clone before using it. If previous fragments were already queued, preserve the driver's existing partial-write behavior by returning the number of bytes submitted so far.

In the Linux kernel, the following vulnerability has been resolved: kcm: use WRITE_ONCE() when changing lower socket callbacks kcm_attach() replaces a live lower TCP socket's sk_data_ready and sk_write_space callbacks with KCM handlers, and kcm_unattach() restores them later. Those callback-pointer updates are still plain stores even though the same fields can be read and invoked concurrently on other CPUs. If another CPU observes an older callback snapshot after the live field has already been restored, callback execution can run with a mismatched target and sk_user_data state, leading to stale or misdirected wakeups. Use WRITE_ONCE() for the callback replacement and restore operations so these shared callback fields follow the same visibility contract already established by the earlier 4022 fixes.

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: avoid stale FIFO cells during resize snd_seq_fifo_resize() still needs to publish the replacement pool before it waits for FIFO users. A blocking snd_seq_read() holds f->use_lock while it sleeps, so concurrent senders must be able to queue to the new pool and wake that reader instead of failing against a closing old pool. However, snd_seq_fifo_event_in() duplicates an event before it takes f->lock, and snd_seq_read() can dequeue a cell and later call snd_seq_fifo_cell_putback() if copy_to_user() or snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches oldhead in between, either path can relink an old-pool cell after the snapshot. That stale cell sits outside the drained oldhead list, keeps oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting for the retired pool to drain. Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(), but reject stale cells before any FIFO relink. Revalidate event-in cells under f->lock and retry them against the published replacement pool, and free stale putback cells instead of linking them back into the FIFO. The buggy scenario involves two paths, with each column showing the order within that path: resize path: relink path: 1. Allocate newpool. 1. Take f->use_lock. 2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool detach oldhead. cell before oldpool closes. 3. Mark oldpool closing and 3. Reach a later relink point after wait for FIFO users. resize published newpool. 4. Free oldhead and delete 4. Relink the old-pool cell after oldpool. resize detached oldhead. 5. Drop f->use_lock. The reproducer reports a resize ioctl blocked in the expected pool teardown path: signal: resize iteration=98 target_pool=4 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=651 wchan=snd_seq_pool_done diagnostic: resize_tid=651 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f A second run with larger pools hit the same target path: signal: resize iteration=32 target_pool=64 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=663 wchan=snd_seq_pool_done diagnostic: resize_tid=663 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers. This patch also disables BH when transmitting the skb to address a possible migration to different CPU leading to imbalanced decrementation of the recursion counters. This is modeled after Florian Westphal's dev_xmit_recursion*() API available since commit 97cdcf37b57e ("net: place xmit recursion in softnet data") according to its current state in the tree.

In the Linux kernel, the following vulnerability has been resolved: cifs: remove all cifs files before kill super Cifs files may be put into fileinfo_put_wq during umounting cifs. After umount done, cifsFileInfo_put_final is called, which cause following BUG: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 134.222152] list_lru_add+0x64/0x1a0 [ 134.222399] ? cifs_put_tcon+0x171/0x340 [cifs] [ 134.222772] d_lru_add+0x44/0x60 [ 134.222997] dput+0x1fc/0x210 [ 134.223213] cifsFileInfo_put_final+0x11a/0x140 [cifs] [ 134.223576] process_one_work+0x17c/0x320 [ 134.223843] worker_thread+0x188/0x280 [ 134.224084] ? __pfx_worker_thread+0x10/0x10 [ 134.224366] kthread+0xcc/0x100 [ 134.224576] ? __pfx_kthread+0x10/0x10 [ 134.224827] ret_from_fork+0x30/0x50 [ 134.225063] ? __pfx_kthread+0x10/0x10 [ 134.225328] ret_from_fork_asm+0x1b/0x30 This can be reproduce by following: unshare -n bash -c " mkdir -p ${CIFS_MNT} ip netns attach root 1 ip link add eth0 type veth peer veth0 netns root ip link set eth0 up ip -n root link set veth0 up ip addr add 192.168.0.2/24 dev eth0 ip -n root addr add 192.168.0.1/24 dev veth0 ip route add default via 192.168.0.1 dev eth0 ip netns exec root sysctl net.ipv4.ip_forward=1 ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1 touch ${CIFS_MNT}/a.txt ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE " umount ${CIFS_MNT}

In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/