CVE Database

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix deadlock between metadata writeback and transaction commit When writing out metadata extent buffers in a zoned filesystem, btree_writepages() holds fs_info->zoned_meta_io_lock across the whole writeback loop, including the call to btrfs_check_meta_write_pointer() -> check_bg_is_active(). For the tree-log block group, check_bg_is_active() may fail to activate the zone and fall back to btrfs_zone_finish_one_bg() to free an active zone. That path waits for the running transaction to commit while still holding zoned_meta_io_lock, but the committer needs that same lock to write out the tree extents, so the two tasks deadlock: Task A (kworker, metadata writeback) Task B (fsstress, transaction commit) ------------------------------------ ------------------------------------- wb_workfn() btrfs_commit_transaction(T) btree_writepages() btrfs_write_and_wait_transaction() btrfs_zoned_meta_io_lock() btrfs_write_marked_extents() btrfs_check_meta_write_pointer() btree_writepages() check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock() btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock, btrfs_zone_finish() held by Task A> do_zone_finish() btrfs_inc_block_group_ro() btrfs_wait_for_commit() <blocks waiting for commit of transaction T, done by Task B> The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock around do_zone_finish() for this exact reason. Do the same in the tree-log branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire it afterwards. The lock only protects fs_info->active_{meta,system}_bg, which this branch does not touch, and ctx->zoned_bg keeps a reference to the block group across the unlock, so nothing is lost while the lock is dropped. This hang occasionally reproduces with fstests generic/475 on a zoned btrfs filesystem.

In the Linux kernel, the following vulnerability has been resolved: btrfs: skip global block reserve accounting for rescue mounts [BUG] Mounting with rescue=ibadroots after corrupting the block group tree root triggers a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000100 RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs] Call Trace: fill_dummy_bgs+0xd4/0x120 [btrfs] open_ctree+0xc6e/0x1ca0 [btrfs] btrfs_get_tree+0x50d/0xa40 [btrfs] The same crash occurs with a corrupted raid stripe tree root, via btrfs_read_block_groups() instead of fill_dummy_bgs(). [CAUSE] With rescue=ibadroots, btrfs_read_roots() allows the mount to continue when either root cannot be read, leaving the corresponding root pointer NULL while its on-disk feature bit remains set. btrfs_update_global_block_rsv() then dereferences the missing root based on the feature bit alone. [FIX] Rescue mounts are fully read-only and cannot start transactions, so the global reserve is never consumed. Under btrfs_is_full_ro(), mark the reserve as full and return before performing the accounting. And since we need to check if the fs is mount fully RO, export fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h. [ Squash the fs_is_full_ro() export commit into this one. ]

In the Linux kernel, the following vulnerability has been resolved: ntfs: harden runlist realloc size calculations Add a shared helper to safely convert runlist element counts to byte sizes using overflow checks, and use it in both ntfs_rl_realloc() and ntfs_rl_realloc_nofail().

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25 ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694) nf_confirm (net/netfilter/nf_conntrack_proto.c:183) nf_hook_slow (net/netfilter/core.c:619) ip6_output (net/ipv6/ip6_output.c:246) ip6_forward (net/ipv6/ip6_output.c:690) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6212) process_backlog (net/core/dev.c:6676) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ...

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Fix race between LPI release and re-registration Fix a potential race between decrementing an LPI's reference count and evicting that structure from the LPI xarray. LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa). When the reference count of an LPI structure drops to zero, vgic_release_lpi_locked() removes the structure from the xarray and frees it under the xarray lock. However, the release of an LPI can race with a concurrent LPI re-registration with the same INTID via vgic_add_lpi() on another CPU, since the reference count drop and the xarray eviction are not performed in a single atomic step. This can happen e.g. if the guest issues a DISCARD while the LPI is still referenced from a vCPU's active-pending list (ap_list), and the same INTID is re-mapped via MAPTI. Particularly, vgic_release_lpi_locked() is called from two distinct paths: direct release via vgic_put_irq(), and deferred release via vgic_release_deleted_lpis(). During direct release, the issue can result in deleting a newly registered LPI from the xarray: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq() __vgic_put_irq() refcount_dec_and_test() vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(old_irq) == false new IRQ inserted --> __xa_store(.., intid, ..) xa_unlock_irqrestore() xa_lock_irqsave(); vgic_release_lpi_locked() __xa_erase(.., irq->intid) <-- BUG: new IRQ is erased kfree_rcu(old_irq) During the deferred release path, the old IRQ can be leaked: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq_norelease() __vgic_put_irq() refcount_dec_and_test() irq->pending_release = true vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(oldirq) == false BUG: old IRQ overwritten --> __xa_store(.., intid, ..) xa_unlock_irqrestore() vgic_release_deleted_lpis() xa_lock_irqsave() xa_for_each() { .. } <-- old IRQ with pending_release = true is gone, so it cannot be released To fix the direct release path, move the reference count drop inside the xarray lock, making sure that vgic_add_lpi() never encounters the to-be-released LPI. In the deferred release path, the refcount drop must happen under a raw spinlock, so the xarray lock cannot be grabbed, and the same solution does not work. Instead, update vgic_add_lpi(), so that if it evicts an LPI from the xarray, it takes on the responsibility of freeing it. Consequently, an LPI may now be freed concurrently after a deferred release drops the refcount, so accessing the pending_release field is no longer safe from use-after-free. Delete all uses of the flag, and update vgic_release_deleted_lpis() to identify orphaned LPIs purely based on their refcount.

In the Linux kernel, the following vulnerability has been resolved: keys: fix out-of-bounds read in keyring_get_key_chunk() For description-level chunks keyring_get_key_chunk() advances the read pointer by level * sizeof(long) past the inline prefix but only bounds-checks the prefix, so a long enough key description is read past its kmemdup(desc, desc_len + 1) allocation. Compute the full byte offset and bounds-check the description against it before reading. The walk only reaches a description-level chunk when two keys collide through the hash, x, type and domain_tag chunks, so this is reached from an unprivileged add_key(2) with a crafted pair of same-type keys whose index hashes collide; KASAN reports a slab-out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: keys: make keyring key-chunk byte order agree with keyring_diff_objects() keyring_get_key_chunk() loads description bytes into the index chunk low address first, while keyring_diff_objects() numbers the first differing bit from the low end and folds the absolute byte index into the level without removing the inline-prefix offset the level already carries. The two disagree on byte order and bit position, so the array can be told two keys first differ at a bit that does not differ in the chunk the walker uses, letting crafted descriptions collide into one node. Load the chunk in the order keyring_diff_objects() assumes and drop the inline-prefix length when folding the byte index into the level. This only changes the in-memory ordering used to place keys within a keyring; add, search and read of non-colliding keys are unaffected.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup().

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the dsthash_ent structure which represents an entry in the hashtable. There is a union area which uses a different layout to express the rate match mode. Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode flag is requested by two or more different rules that refer to the same hashtable. Otherwise, uninitialized access to the burst field in the union is possible. Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by revision less than 3 too.

In the Linux kernel, the following vulnerability has been resolved: rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check() rds_tcp_laddr_check() looks up a scoped IPv6 interface with dev_get_by_index_rcu(), drops the RCU read-side lock, and only then passes the bare struct net_device * into ipv6_chk_addr(). dev_get_by_index_rcu() only keeps the device alive within the same RCU read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can free the net_device; ipv6_chk_addr() then dereferences the stale pointer in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading freed memory. Keep the RCU read-side lock held across the ipv6_chk_addr() call instead of dropping it right after the lookup, so the device cannot be freed while it is in use. BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) Read of size 8 at addr ffff8880106ec000 by task exploit/153 Call Trace: ... kasan_report (mm/kasan/report.c:595) __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972) rds_tcp_laddr_check (net/rds/tcp.c:370) rds_bind (net/rds/bind.c:248) __sys_bind (net/socket.c:1920) __x64_sys_bind (net/socket.c:1956) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)

In the Linux kernel, the following vulnerability has been resolved: nexthop: take nh->lock for f6i_list walks in replace check and notify fib6_check_nh_list() and __nexthop_replace_notify() walk nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock. IPv6 RTM_NEWROUTE/RTM_DELROUTE run without RTNL and mutate that list under nh->lock (fib6_add_rt2node_nh(), fib6_purge_rt()), so both walks race a concurrent route delete that unlinks and frees a fib6_info: BUG: KASAN: slab-use-after-free in rt6_fill_node.isra.0 (net/ipv6/route.c:5799) Read of size 4 at addr ffff888014607e64 by task exploit/143 rt6_fill_node.isra.0 (net/ipv6/route.c:5799) fib6_rt_update (net/ipv6/route.c:6412) __nexthop_replace_notify (net/ipv4/nexthop.c:2542) rtm_new_nexthop (net/ipv4/nexthop.c:2554) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) BUG: KASAN: slab-use-after-free in fib6_check_nh_list (net/ipv4/nexthop.c:1605) Read of size 8 at addr ffff888014a7d068 by task exploit/142 fib6_check_nh_list (net/ipv4/nexthop.c:1605) rtm_new_nexthop (net/ipv4/nexthop.c:2575) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Both walks only read the entries and take no tb6_lock, so protect them with nh->lock; fib6_rt_update() uses gfp_any(), which returns GFP_ATOMIC under the lock.

In the Linux kernel, the following vulnerability has been resolved: nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock, racing the unlocked IPv6 route add/delete that mutate the list under nh->lock and free fib6_info entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()): BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243) Read of size 8 at addr ffff888012953e18 by task exploit/146 nh_rt_cache_flush (net/ipv4/nexthop.c:2243) replace_nexthop (net/ipv4/nexthop.c:2610) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Unlike the other f6i_list walks, this one bumps each route's sernum via fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock around it would invert the established tb6_lock -> nh->lock order and deadlock. As the only purpose is to invalidate cached dsts, bump the IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead, mirroring the rt_cache_flush() already done for IPv4 just above.

In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/

In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again.

In the Linux kernel, the following vulnerability has been resolved: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering.

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the target-supplied data segment. The segment carries a 2-byte sense length followed by the sense bytes, so it must hold 2 + senselen bytes, but the bounds check only requires datalen >= senselen: senselen = get_unaligned_be16(data); if (datalen < senselen) goto invalid_datalen; memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); A target that returns a SCSI Response whose datalen equals senselen (with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data + 2 read up to two bytes past the received data. Those bytes are stale conn->data contents and end up in the command's sense buffer, which is returned to userspace. Account for the 2-byte sense length prefix in the check.

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer iscsi_tcp_hdr_dissect() receives the data segment of several PDU types into the fixed-size conn->data buffer, which is allocated for ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP, REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU whose DataSegmentLength exceeds that buffer. The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its data segment (sense/response data) into conn->data via iscsi_tcp_data_recv_prep(), but it does so without the same check. The only upstream bound on in.datalen is conn->max_recv_dlength, the initiator's advertised MaxRecvDataSegmentLength, which is commonly negotiated well above 8192 (open-iscsi defaults to 262144). A target that returns a SCSI Response with a DataSegmentLength between 8193 and max_recv_dlength therefore overflows the 8192-byte conn->data buffer. Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly like those responses: bound the data segment, receive it into conn->data when present, and otherwise complete the PDU with no data. Fold the opcode into that case group rather than duplicating the check.

In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup() ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is wrong: dp_peer->peer_id for an MLO peer always carries the ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS (256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The intended bitmap entry also never gets cleared, so subsequent ath12k_peer_ml_alloc() calls eventually run out of IDs. The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and is stored in ahsta->ml_peer_id. Use that instead. While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so the bitmap and ahsta->ml_peer_id stay in sync. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) DMA-align output buffer Sashiko reports: When send_output_report() calls hid_hw_output_report(), the underlying USB HID core calls usb_interrupt_msg() which maps this buffer directly for DMA. When the DMA mapping flushes or invalidates the cacheline, it will corrupt the adjacent variables (mutex, update_interval) that were modified concurrently by the CPU. This causes memory corruption due to cacheline sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings for this violation. Any operation that triggers send_output_report() (like setting a fan speed or updating the interval) causes the USB DMA mapping. On systems with non-coherent caches, this structural bug causes immediate and deterministic memory corruption. Align the output buffer to ARCH_DMA_MINALIGN to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates an un-rate-limited ICMP packet storm. Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and ndisc_send_redirect() when peer is NULL.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Prevent access to unsupported weight registers Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN. Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfiguration or system crashes. The underlying problem is that the chip does support up to five fan control channels, but only the first three support weight control. Fix the problem by extending the affected weight register arrays with zeroed fields. The driver uses zeroed register addresses to determine if a register is supported or not, and skips accesses for unsupported registers.

In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev().

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once.

In the Linux kernel, the following vulnerability has been resolved: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change().

In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work()) to prevent high CPU contention while waiting for RTNL lock. The utn->work_pending bookkeeping is no longer needed and is removed, as the workqueue core already tracks the pending/running state of the work. [1] BUG: memory leak unreferenced object 0xffff888127d5f840 (size 96): comm "syz-executor", pid 5806, jiffies 4294942188 backtrace (crc 99fdb6c8): __kmalloc_noprof+0x3bf/0x550 udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline] udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline] udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931 notifier_call_chain+0x59/0x160 kernel/notifier.c:85 call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250 register_netdevice+0xc10/0xeb0 net/core/dev.c:11478