CVE Database

In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Mark the connection down when bringing it up fails Every failure path in tbnet_connected_work() undoes its own work and returns without clearing login_sent, so the connection still looks established. The next tbnet_tear_down() therefore takes its main branch and repeats a teardown that already happened: it stops rings that are already stopped, which is a dev_WARN() and fatal under panic_on_warn, and it releases net->remote_transmit_path even on the HopID mismatch path, where this connection never owned that id, silently freeing one that someone else is still using. Clear login_sent on those paths. That is enough for tbnet_tear_down() to leave the unwound state alone, and login_received has to stay set: it records that the peer has logged in and carries the transmit path it gave us, which nothing on this side can make the peer send again. Two things change beyond keeping the teardown out of the way: the logout request in that block is no longer sent, and the peer's next login request now re-queues our login work rather than connected_work, giving the connection a fresh login instead of a retry on stale state.

In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_transport: Reject oversized TX buffers ntb_process_tx() handles an oversized buffer by calling tx_handler() with a NULL data pointer and returning success. ntb_netdev therefore neither frees the skb in its completion callback nor takes its enqueue error path, leaking it. Reject oversized buffers in ntb_transport_tx_enqueue() before acquiring a queue entry and return -EMSGSIZE. The caller retains ownership of the buffer, and the preceding netdev patch frees the skb when enqueue returns this permanent error.

In the Linux kernel, the following vulnerability has been resolved: net/smc: carry oversized SMC-Rv2 LLC messages in the queue entry smc_llc_rmt_delete_rkey() and smc_llc_save_add_link_rkeys() read the part of a v2 message that does not fit into the 44-byte union smc_llc_msg, and both bound themselves by the size of the buffer it landed in, not by what arrived. On a link with a shared v2 receive buffer a 44-byte DELETE_RKEY_V2 declaring 255 rkeys reaches rkey[9..254] in whatever an earlier message left in lgr->wr_rx_buf_v2, and passes each of them to smc_rtoken_delete(). One of those 255 matched a registered rtoken and deleted it. An ADD_LINK on such a link installs up to 255 rtokens from the same bytes. Copy the tail into the queue entry, so its length is the length of the message that arrived, and declare the rkeys that fit inline as a member of the union instead of reaching them through a cast. The same DELETE_RKEY_V2 now processes the 9 rkeys it carries. The copy is limited to the longest tail the two functions can read, so the peer does not pick the size of the entry. The bound the previous patch placed on links without a shared v2 receive buffer is no longer needed.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix use-after-free in smc_rx_pipe_buf_release() smc_rx_splice() hands RMB pages to a pipe and takes a socket reference per entry so the smc_sock stays alive until the reader finishes. The connection does not: a concurrent close runs smc_conn_free(), which releases the receive buffer back to the link group pool. smc_rx_pipe_buf_release() tests sk_state before taking the socket lock. The state can change between the test and the lock, and smc_rx_update_cons() then dereferences conn->rmb_desc and walks conn->lgr, which smc_conn_free() has already released. On the is_reg_err path smcr_buf_unuse() frees the descriptor outright, so this is a use-after-free. Take the socket lock first and test conn->freed instead. smc_conn_free() sets that flag before releasing anything, and every caller holds the socket lock. The two paths exclude each other: either the pipe release runs first with everything valid, or it sees the flag and skips the update.

In the Linux kernel, the following vulnerability has been resolved: net/smc: unregister the connection before draining the rx tasklet smc_conn_free() calls smc_ism_unset_conn() only while the link group is still on its device list, and never sets conn->killed. smc_lgr_terminate_sched() unlinks the group immediately and defers killing its connections to a work item, so a connection freed in that window keeps its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the device can re-arm the receive tasklet after tasklet_kill() has returned. On the DMB-nocopy path the ghost send buffer is freed right after that drain, so the re-armed tasklet dereferences it. Unregister unconditionally and drain before the detach at both teardown sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain. Clear conn->sndbuf_desc before freeing it as well, so a reader that samples the pointer cannot get one that is already freed.

In the Linux kernel, the following vulnerability has been resolved: net: cap advertised IP tunnel headroom IP tunnel devices derive their advertised needed_headroom from lower output devices. A stack of user-created devices can make the derived value larger than the 16-bit skb header offsets can represent. Once IP output reserves it, skb head expansion can wrap those offsets. The runtime transmit path already caps a growing needed_headroom at 512. Apply the same cap when tunnel configuration publishes needed_headroom derived from a lower output device. Capping the advertised value is safe: IP tunnel transmit still expands the skb when a packet needs more headroom. A nonsensical stacked configuration can therefore incur an extra reallocation, but it cannot publish an unbounded reservation to upper layers.

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't touch shared zerocopy state in skb_tx_error() skb_tx_error() completes the zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone shares, while the caller only owns the reference it is about to drop. Through a clone it tells the producer its pages are free and drops SKBFL_SHARED_FRAG for an skb that is still in flight. Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC: clone_execute() sends a skb_clone() into ovs_dp_process_packet() while do_execute_actions() keeps forwarding the original, and skb_clone() does not privatise the frags here -- skb_orphan_frags() returns early on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker from the packet still being forwarded, and a later local ESP delivery decrypts in place over frags it does not own privately. Skip it for a cloned skb. Nothing is lost: skb_release_data() clears the zerocopy state once the last reference to the shared data goes.

In the Linux kernel, the following vulnerability has been resolved: mfd: qnap-mcu: keep the reply buffer alive past a command timeout qnap_mcu_exec() publishes an on-stack buffer to the receive path: unsigned char rx[QNAP_MCU_RX_BUFFER_SIZE]; ... reply->data = rx; reply->length = length; and qnap_mcu_receive_buf() writes into it from the serdev receive path, which runs out of flush_to_ldisc() and is not serialized against qnap_mcu_exec() at all. bus_lock cannot cover it, because qnap_mcu_exec() holds that mutex across wait_for_completion_timeout(). On a timeout qnap_mcu_exec() returns with reply->data still pointing at its own frame. A reply that arrives late, or an unsolicited message from the MCU, is then written into a stack frame that has been left, corrupting whatever runs next on that stack. The same applies when qnap_mcu_write() fails, since that path returns without touching the reply state either. Move the receive buffer into struct qnap_mcu. It is 37 bytes and the structure is devm_kzalloc()ed, so it lives as long as the driver, and a late write lands in memory that is still valid and is reinitialized by the next command. bus_lock keeps commands from sharing it. This deliberately does not clear reply->data or reply->length on the timeout path. Doing so races with qnap_mcu_receive_buf(), which reads both after its if (!reply->length) return size; check: clearing reply->data gives a NULL dereference, and clearing reply->length alone removes the reply->received == reply->length exit condition, so the copy loop runs until the uart chunk is consumed and overruns the buffer. Leaving both set keeps the write bounded by reply->length, which qnap_mcu_exec() has already checked against sizeof(mcu->rx).

In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: clear the URB pointers on disconnect bcd2000_free_usb_related_resources() frees both URBs and leaves the pointers behind: usb_kill_urb(bcd2k->midi_out_urb); usb_kill_urb(bcd2k->midi_in_urb); usb_free_urb(bcd2k->midi_out_urb); usb_free_urb(bcd2k->midi_in_urb); The rawmidi device outlives that call. A substream that is still open when the device is unplugged reaches bcd2000_midi_send() from the trigger path on close. That function writes to the freed URB and then hands it to the USB core: bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE; ... ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC); usb_kill_urb() does not stop a later submission either, so a submit that races the disconnect can requeue the URB after it has been reaped. midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits it from the completion handler. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000] Write of size 4 at addr ffff00001827d388 by task bpoc/168 __asan_store4 bcd2000_midi_send [snd_bcd2000] bcd2000_midi_output_trigger [snd_bcd2000] snd_rawmidi_kernel_write1 close_substream.part.0 Freed by task 168: usb_free_urb bcd2000_disconnect [snd_bcd2000] BUG: KASAN: slab-use-after-free in usb_submit_urb Read of size 8 at addr ffff00001827d3b8 by task bpoc/168 Clear both pointers after freeing and test them on the paths that can still run. Poison the URBs before freeing them: usb_poison_urb() waits for a running completion handler and rejects any later submission, so after it returns the input path is quiesced and only the rawmidi trigger path can still reach bcd2000_midi_send(). No unpoison is needed; the URBs are freed on the next line. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcxhr: initialize mutexes before requesting threaded IRQ pcxhr_probe() requests pcxhr_threaded_irq() before initializing mgr->lock, even though the threaded handler takes that mutex. Initialize the manager locks before request_threaded_irq() so an early interrupt cannot run against uninitialized mutex state during probe.

In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate geometry fields from on-disk cache_info cache_segs_init() iterates cache_info->n_segs times indexing cache->segments[], which is sized to the cache device geometry, and get_seg_id() takes each segment id from the on-media cache_info and the per-segment next_seg link. Both come from cache device metadata that is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls them: an oversized n_segs or an out-of-range id drives an out-of-bounds access of cache->segments[] and a wild CACHE_DEV_SEGMENT() pointer into the device mapping -- an out-of-bounds read and write from on-disk data. Reject an n_segs that exceeds the device segment count and a segment id that is out of range before either is used. Valid metadata is unaffected.

In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate kset key_num and intra-segment bounds Two more fields decoded from the cache device go unbounded. The kset key_num drives cache_kset_crc() and the replay loop in cache_replay(), the writeback worker and the GC worker, but only the magic and a fixed-seed CRC are checked first, so a non-last kset whose key_num exceeds the PCACHE_KSET_KEYS_MAX buffer reads past its end before the CRC compare. A key's intra-segment offset and length in cache_key_decode() are taken verbatim, so a key running past its segment is replayed into the cache tree and the data CRC check and every later read hit then copy adjacent persistent memory into the caller's bio -- an out-of-bounds read that leaks to user space. Both fields are controlled by whoever supplies the cache device (CAP_SYS_ADMIN); the CRC seed is public. Add kset_onmedia_valid() to bound key_num before any kset read, and reject a key whose offset plus length, computed in 64 bits, exceeds the segment data_size. Valid metadata is unaffected.

In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the persisted tail-position offset cache_pos_decode() takes the persisted key_tail and dirty_tail seg_off from the cache device and addresses within the segment with it. A seg_off at or past the segment data_size, controllable by whoever supplies the device (CAP_SYS_ADMIN), reads past the segment data. Reject a decoded seg_off that is not below the segment data_size.

In the Linux kernel, the following vulnerability has been resolved: dm-pcache: clamp the tail kset read to the segment data region The tail-kset read in cache_replay(), the writeback worker and the GC worker bounds its length by PCACHE_SEG_SIZE - seg_off, the raw segment size rather than the data region. A tail near the segment end reads past the segment data into the following control area. Clamp the read to cache_seg_remain(), the data region.

In the Linux kernel, the following vulnerability has been resolved: dm-pcache: fix use-after-free and invalid seg operations in kset_replay() In kset_replay, when key->seg_gen is stale (key->seg_gen < key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then key->cache_pos.cache_seg is accessed as the argument to cache_seg_get(). This is a use-after-free on the freed key memory. Although mempool recycled memory is not immediately reclaimed or overwritten in practice, this is still a potential UAF bug. Additionally, for expired invalid keys, setting the cache->seg_map bit and calling cache_seg_get() is unreasonable since the corresponding segment data is no longer valid. Fix both issues by moving cache_seg_get() and __set_bit() after the gen check, so they only execute for valid keys, and using continue to skip invalid keys.

In the Linux kernel, the following vulnerability has been resolved: i3c: Fix unlocked dereference of dev->desc in i3c_device_get_supported_xfer_mode() i3c_device_get_supported_xfer_mode() uses dev->desc to obtain the master controller. However, dev->desc must not be dereferenced unless bus->lock is held, and this function does not take that lock. The function only needs access to the master controller associated with the device's bus. Use dev->bus instead, which is always valid for the lifetime of the device and does not require dereferencing dev->desc.

In the Linux kernel, the following vulnerability has been resolved: i3c: master: adi: initialize the lock before enabling interrupts adi_i3c_master_probe() requests the IRQ and unmasks REG_IRQ_PENDING_CMDR before the controller's IBI state, transfer queue list and transfer queue lock are initialized. A pending CMDR interrupt can therefore run adi_i3c_master_irq() and take master->xferqueue.lock before the dynamic lock has been initialized. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the probe ordering and the IRQ path adi_i3c_master_probe() -> adi_i3c_master_irq() -> xferqueue.lock, with a pending CMDR interrupt arriving after REG_IRQ_PENDING_CMDR is unmasked. Lockdep reported: INFO: trying to register non-static key. you didn't initialize this object before use? lock_acquire+0xbb/0x290 _raw_spin_lock_irqsave+0x36/0x60 adi_i3c_master_irq+0x32/0x56 [vuln_msv] adi_i3c_master_probe+0x5a/0xf47 [vuln_msv] Initialize the transfer queue and IBI state before requesting and unmasking the IRQ.

In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix info leak and UAF in device unregister path i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before calling device_unregister(). During device_unregister(), device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while the device descriptor is still expected to be valid. As a result, i3c_device_uevent() and a racing modalias_show() can observe a NULL desc and fall back to an uninitialized stack struct i3c_device_info, leaking kernel stack contents in the generated modalias. Driver .remove() callbacks may also encounter an unexpected NULL desc during unbind. Keep desc valid until device_unregister() has completed. Since device_unregister() drops the device reference and may free the device, take an extra reference with get_device() before unregistering. Clear desc afterwards and release the extra reference with put_device(). This preserves the release-time invariant that desc must be NULL while avoiding both the information leak and a potential use-after-free from writing desc after the device has been released.

In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Check that the transfer is valid before accessing it The Renesas I3C driver uses an asynchronous model to transfer data. It prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion. The interrupt handler dequeues the transfer, updates/uses it, and signals the waiting thread. If the completion times out, the waiting thread dequeues the transfer and free it. If an interrupt fires after that, the handler may access freed memory, leading to crashes. Check that the transfer is still valid before accessing it in the interrupt handler. With it clear any status flags and disable all the interrupts to avoid triggering the same interrupts again.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop rtl8xxxu arms rx_urb_wq from the RX completion path: rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which queues it on rx_urb_pending_list and, once the list grows past RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(), which anchors it on rx_anchor and dereferences priv->udev. rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog, update_beacon_work) but never cancels rx_urb_wq, so a worker armed during the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv, producing a use-after-free. The window opens under active RX traffic (pending count above the watermark) followed by a disconnect. There are two teardown races to close: * rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock but called schedule_work() after dropping the lock. A completion that observed shutdown == false and released the lock could then call schedule_work() after rtl8xxxu_stop() had set shutdown and cancel_work_sync() had already returned, arming the worker to run after the teardown. Move schedule_work() under the same !shutdown branch so the arming decision is atomic with the shutdown check. * rtl8xxxu_rx_urb_work() anchors every URB it drained back onto rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a URB that escaped the kill. In rtl8xxxu_stop(), call cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is drained first. After priv->shutdown is set under rx_urb_lock, completions can no longer queue rx_urb_wq. cancel_work_sync() then drains the last queued or running worker, and the following usb_kill_anchored_urbs() kills the URBs it may have submitted. rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw() guarantees .stop() runs for a live interface before ieee80211_free_hw() frees priv. The probe error path needs no cancel: rx_urb_wq is INIT_WORK()'d there but cannot have been scheduled, since no URB is submitted before ieee80211_register_hw() succeeds. This bug was found by static analysis.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Detach sync cmd buffer on interrupted wait mwifiex synchronous commands keep the caller-provided data buffer in cmd_node->data_buf. Several callers pass stack-allocated objects there. If wait_event_interruptible_timeout() is interrupted, the caller can return and release that stack object while the firmware command is still the current command. A late firmware response then reaches the normal response handler, which can copy data through cmd_node->data_buf into the stale stack address. This fixes a stack corruption observed during repeated association and disassociation cycles. The panic trace showed the command wait being interrupted immediately before a bad pointer dereference: cmd_wait_q terminated: -512 Unable to handle kernel paging request at virtual address 002c583837384662 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted ... Tainted: [M]=MACHINE_CHECK The fault address decodes as little-endian ASCII: 0x002c583837384662 -> "bF878X,\0" which is a fragment of the VERSION_EXT firmware string exposed as debugfs "verext": w8997o-V4, RF878X, FP92, 16.92.21.p153.7 The same runs also showed corrupted control data containing: 0x2400372e333531 -> "153.7\0$" which is the tail of the same VERSION_EXT string. This points at a late VERSION_EXT response writing through a stale stack-backed data_buf after the interrupted wait returned. After cancelling pending commands on an interrupted or timed-out wait, detach the caller-owned data buffer from the still-current command. This preserves the existing command cancellation behaviour while preventing a late response from writing through a pointer whose lifetime ended with the waiting caller. Tested on an i.MX8MP board using an 88W8997.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID from the 802.11 header and then uses it as an index into sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID value, so the result can be in the range 0..15. rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the aggregation state array. Keep the default RTL_AGG_STOP state for out-of-range TIDs, matching rtl92cu_tx_fill_desc(). This issue was detected by our static analysis tool and confirmed by manual audit. UBSAN validation for the same bug pattern reports an array-index-out-of-bounds access with index 10 for type 'rtl_tid_data [9]'.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's dev->mt76.eeprom.data buffer at the offset reported by the MCU response (res->addr, a device-controlled __le32) without checking it against the buffer size. A malicious or malfunctioning device can report an arbitrary address and drive a 16-byte out-of-bounds write past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel mlo_pm_work on stop mt7925 queues mlo_pm_work with a 5 second delay during multi-link power-save setup and never cancels it on the stop path. If the device is torn down inside that window, the work outlives the teardown and its timer fires afterwards, trying to queue onto the workqueue that is already gone: workqueue: cannot queue mt7925_mlo_pm_work [mt7925_common] on wq phy0 WARNING: kernel/workqueue.c:2283 at __queue_work+0x59/0xa0, CPU#1: swapper/1/0 call_timer_fn+0x2a/0x140 __run_timers+0x203/0x330 run_timer_softirq+0x86/0xf0 mt7921 already has its own stop callback, so add one for mt7925 that cancels the work before calling mt792x_stop(). mt7925_ops backs both the PCIe and USB drivers, so this covers both.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block copy from the address reported by the MCU response (event->addr, a device-controlled __le32) and clamps only the copy length, never the destination offset into dev->mt76.eeprom.data. A malicious or malfunctioning device can report an arbitrary address and drive an out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate default EEPROM firmware size The default EEPROM firmware is parsed and copied as a full EEPROM without checking its length. A truncated file can make the driver read beyond the firmware buffer during variant validation or the fallback copy. Reject files shorter than MT7996_EEPROM_SIZE before parsing or copying the firmware.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: flush works in dependency order virtio_vsock_remove() stops the virtqueues and then flushes each work item before freeing the enclosing virtio_vsock. The current order does not account for dependencies between those items: tx_work may queue send_pkt_work, and send_pkt_work may queue rx_work. In particular, send_pkt_work can set restart_rx and release tx_lock. The remove path can then stop the queues and flush rx_work before send_pkt_work queues it. Although the later send_pkt_work flush waits for that producer to finish, nothing waits for the newly queued rx_work, so kfree(vsock) can race with it. KASAN reported: BUG: KASAN: slab-use-after-free in virtio_transport_rx_work+0x487/0x4b0 Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtio_transport_rx_work+0x487/0x4b0 process_one_work+0x688/0x1120 worker_thread+0x45b/0xd10 Allocated by task 1: virtio_vsock_probe+0xef/0x6b0 Freed by task 84: kfree+0x131/0x3c0 virtio_vsock_remove+0xd1/0x100 Flush the works in producer-to-consumer order. virtio_vsock_vqs_del() has already disabled the queue callbacks and cleared the run flags, so after tx_work and send_pkt_work are drained, no source remains that can queue rx_work after its flush.

In the Linux kernel, the following vulnerability has been resolved: w1: ds28e17: reject an oversize length on an I2C block read w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the device. The downstream slave puts a length byte in buf[0]. The driver then reads that many bytes into buf[1] with w1_f19_i2c_read(). buf[0] is controlled by the device and can be 0 to 255. w1_f19_i2c_read() only rejects a zero count. The caller buffer is I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read run past it, up to about 222 bytes out of bounds. The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That check runs after master_xfer returns. By then the write is already done. i2c-algo-bit rejects an oversize length before it copies, and returns -EPROTO. Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the same way i2c-algo-bit does.

In the Linux kernel, the following vulnerability has been resolved: sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[] cad_pid is global, and kill_cad_pid() is only used in the root namespace. However, due to pid_table_root_permissions(), a non-root user can unshare pid/user namespaces and modify it from the child namespace. This makes no sense and is simply wrong. Move it to kern_reboot_table[] where it logically belongs; this ensures that only GLOBAL_ROOT_UID can read/modify this sysctl. Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always set when kern_reboot_table[] is compiled.

In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials here. I have tested that this bug can lead to a KASAN-reported UAF of struct cred in smack_file_send_sigiotask(), and that this fix prevents the race.