CVE Database

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4() In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE device and then reassigned an ISA device: dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...); dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...); If the first lookup succeeds but the second fails, dev becomes NULL. This leads to a potential null-pointer dereference when dev_dbg() is called: if (errata.piix4.bmisx) dev_dbg(&dev->dev, ...); To prevent this, use two temporary pointers and retrieve each device independently, avoiding overwriting dev with a possible NULL value. [ rjw: Subject adjustment, added an empty code line ]

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5647: Initialize subdev before controls In ov5647_init_controls() we call v4l2_get_subdevdata, but it is initialized by v4l2_i2c_subdev_init() in the probe, which currently happens after init_controls(). This can result in a segfault if the error condition is hit, and we try to access i2c_client, so fix the order.

In the Linux kernel, the following vulnerability has been resolved: soc/tegra: pmc: Fix unsafe generic_handle_irq() call Currently, when resuming from system suspend on Tegra platforms, the following warning is observed: WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666 Call trace: handle_irq_desc+0x20/0x58 (P) tegra186_pmc_wake_syscore_resume+0xe4/0x15c syscore_resume+0x3c/0xb8 suspend_devices_and_enter+0x510/0x540 pm_suspend+0x16c/0x1d8 The warning occurs because generic_handle_irq() is being called from a non-interrupt context which is considered as unsafe. Fix this warning by deferring generic_handle_irq() call to an IRQ work which gets executed in hard IRQ context where generic_handle_irq() can be called safely. When PREEMPT_RT kernels are used, regular IRQ work (initialized with init_irq_work) is deferred to run in per-CPU kthreads in preemptible context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD variant so that with PREEMPT_RT kernels, the IRQ work is processed in hardirq context instead of being deferred to a thread which is required for calling generic_handle_irq(). On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD() execute in IRQ context, so this change has no functional impact for standard kernel configurations. [treding@nvidia.com: miscellaneous cleanups]

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and g2 VPU cannot decode simultaneously; otherwise, it will cause below bus error and produce corrupted pictures, even potentially lead to system hang. [ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out. [ 110.583517] hantro-vpu 38310000.video-codec: bus error detected. Therefore, it is necessary to ensure that g1 and g2 operate alternately. This allows for successful multi-instance decoding of H.264 and HEVC. To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the v4l2_m2m_dev can handle the scheduling.

In the Linux kernel, the following vulnerability has been resolved: md raid: fix hang when stopping arrays with metadata through dm-raid When using device-mapper's dm-raid target, stopping a RAID array can cause the system to hang under specific conditions. This occurs when: - A dm-raid managed device tree is suspended from top to bottom (the top-level RAID device is suspended first, followed by its underlying metadata and data devices) - The top-level RAID device is then removed Removing the top-level device triggers a hang in the following sequence: the dm-raid destructor calls md_stop(), which tries to flush the write-intent bitmap by writing to the metadata sub-devices. However, these devices are already suspended, making them unable to complete the write-intent operations and causing an indefinite block. Fix: - Prevent bitmap flushing when md_stop() is called from dm-raid destructor context and avoid a quiescing/unquescing cycle which could also cause I/O - Still allow write-intent bitmap flushing when called from dm-raid suspend context This ensures that RAID array teardown can complete successfully even when the underlying devices are in a suspended state. This second patch uses md_is_rdwr() to distinguish between suspend and destructor paths as elaborated on above.

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref() There is no need to BUG(), we can just return an error and log an error message.

In the Linux kernel, the following vulnerability has been resolved: bpf: crypto: Use the correct destructor kfunc type With CONFIG_CFI enabled, the kernel strictly enforces that indirect function calls use a function pointer type that matches the target function. I ran into the following type mismatch when running BPF self-tests: CFI failure at bpf_obj_free_fields+0x190/0x238 (target: bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc) Internal error: Oops - CFI: 00000000f2008228 [#1] SMP ... As bpf_crypto_ctx_release() is also used in BPF programs and using a void pointer as the argument would make the verifier unhappy, add a simple stub function with the correct type and register it as the destructor kfunc instead.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path [Why] The evaluation for whether we need to use the DMUB HW lock isn't the same as whether we need to unlock which results in a hang when the fast path is used for ASIC without FAMS support. [How] Store a flag that indicates whether we should use the lock and use that same flag to specify whether unlocking is needed.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Set DMA segment size to avoid debug warnings When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the kernel occasionally reports a segment size mismatch. This is because 'max_seg_size' is not set. The kernel defaults to 64K. setting 'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()' from complaining about the over-mapping of the V3D segment length. DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536] WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388 CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1 Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_dma_map_sg+0x330/0x388 lr : debug_dma_map_sg+0x330/0x388 sp : ffff8000829a3ac0 x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000 x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000 x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002 x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573 x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000 x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001 x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280 Call trace: debug_dma_map_sg+0x330/0x388 __dma_map_sg_attrs+0xc0/0x278 dma_map_sgtable+0x30/0x58 drm_gem_shmem_get_pages_sgt+0xb4/0x140 v3d_bo_create_finish+0x28/0x130 [v3d] v3d_create_bo_ioctl+0x54/0x180 [v3d] drm_ioctl_kernel+0xc8/0x140 drm_ioctl+0x2d4/0x4d8

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix PM runtime usage count underflow Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in the remove path to properly pair with pm_runtime_use_autosuspend() from probe. This allows pm_runtime_disable() to handle reference count cleanup correctly regardless of current suspend state. The driver calls pm_runtime_put_sync() unconditionally in remove, but the device may already be suspended due to autosuspend configured in probe. When autosuspend has already suspended the device, the usage count is 0, and pm_runtime_put_sync() decrements it to -1. This causes the following warning on module unload: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 ... vdec 30210000.video-codec: Runtime PM usage count underflow!

In the Linux kernel, the following vulnerability has been resolved: drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove() In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it may be NULL: if (!jdi) mipi_dsi_detach(dsi); However, when jdi is NULL, the function does not return and continues by calling jdi_panel_disable(): err = jdi_panel_disable(&jdi->base); Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can lead to a NULL-pointer dereference: struct jdi_panel *jdi = to_panel_jdi(panel); backlight_disable(jdi->backlight); To prevent such a potential NULL-pointer dereference, return early from jdi_panel_dsi_remove() when jdi is NULL.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure() [BUG] There is a bug report that when btrfs hits ENOSPC error in a critical path, btrfs flips RO (this part is expected, although the ENOSPC bug still needs to be addressed). The problem is after the RO flip, if there is a read repair pending, we can hit the ASSERT() inside btrfs_repair_io_failure() like the following: BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -28) WARNING: fs/btrfs/extent-tree.c:3235 at __btrfs_free_extent.isra.0+0x453/0xfd0, CPU#1: btrfs/383844 Modules linked in: kvm_intel kvm irqbypass [...] ---[ end trace 0000000000000000 ]--- BTRFS info (device vdc state EA): 2 enospc errors during balance BTRFS info (device vdc state EA): balance: ended with status: -30 BTRFS error (device vdc state EA): parent transid verify failed on logical 30556160 mirror 2 wanted 8 found 6 BTRFS error (device vdc state EA): bdev /dev/nvme0n1 errs: wr 0, rd 0, flush 0, corrupt 10, gen 0 [...] assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938 ------------[ cut here ]------------ assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938 kernel BUG at fs/btrfs/bio.c:938! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 868 Comm: kworker/u8:13 Tainted: G W N 6.19.0-rc6+ #4788 PREEMPT(full) Tainted: [W]=WARN, [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Workqueue: btrfs-endio simple_end_io_work RIP: 0010:btrfs_repair_io_failure.cold+0xb2/0x120 RSP: 0000:ffffc90001d2bcf0 EFLAGS: 00010246 RAX: 0000000000000051 RBX: 0000000000001000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8305cf42 RDI: 00000000ffffffff RBP: 0000000000000002 R08: 00000000fffeffff R09: ffffffff837fa988 R10: ffffffff8327a9e0 R11: 6f69747265737361 R12: ffff88813018d310 R13: ffff888168b8a000 R14: ffffc90001d2bd90 R15: ffff88810a169000 FS: 0000000000000000(0000) GS:ffff8885e752c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 ------------[ cut here ]------------ [CAUSE] The cause of -ENOSPC error during the test case btrfs/124 is still unknown, although it's known that we still have cases where metadata can be over-committed but can not be fulfilled correctly, thus if we hit such ENOSPC error inside a critical path, we have no choice but abort the current transaction. This will mark the fs read-only. The problem is inside the btrfs_repair_io_failure() path that we require the fs not to be mount read-only. This is normally fine, but if we are doing a read-repair meanwhile the fs flips RO due to a critical error, we can enter btrfs_repair_io_failure() with super block set to read-only, thus triggering the above crash. [FIX] Just replace the ASSERT() with a proper return if the fs is already read-only.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Skip vcn poison irq release on VF VF doesn't enable VCN poison irq in VCNv2.5. Skip releasing it and avoid call trace during deinitialization. [ 71.913601] [drm] clean up the vf2pf work item [ 71.915088] ------------[ cut here ]------------ [ 71.915092] WARNING: CPU: 3 PID: 1079 at /tmp/amd.aFkFvSQl/amd/amdgpu/amdgpu_irq.c:641 amdgpu_irq_put+0xc6/0xe0 [amdgpu] [ 71.915355] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_display_helper cec rc_core i2c_algo_bit video wmi binfmt_misc nls_iso8859_1 intel_rapl_msr intel_rapl_common input_leds joydev serio_raw mac_hid qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 hid_generic crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel usbhid 8139too sha256_ssse3 sha1_ssse3 hid psmouse bochs i2c_i801 ahci drm_vram_helper libahci i2c_smbus lpc_ich drm_ttm_helper 8139cp mii ttm aesni_intel crypto_simd cryptd [ 71.915484] CPU: 3 PID: 1079 Comm: rmmod Tainted: G OE 6.8.0-87-generic #88~22.04.1-Ubuntu [ 71.915489] Hardware name: Red Hat KVM/RHEL, BIOS 1.16.3-2.el9_5.1 04/01/2014 [ 71.915492] RIP: 0010:amdgpu_irq_put+0xc6/0xe0 [amdgpu] [ 71.915768] Code: 75 84 b8 ea ff ff ff eb d4 44 89 ea 48 89 de 4c 89 e7 e8 fd fc ff ff 5b 41 5c 41 5d 41 5e 5d 31 d2 31 f6 31 ff e9 55 30 3b c7 <0f> 0b eb d4 b8 fe ff ff ff eb a8 e9 b7 3b 8a 00 66 2e 0f 1f 84 00 [ 71.915771] RSP: 0018:ffffcf0800eafa30 EFLAGS: 00010246 [ 71.915775] RAX: 0000000000000000 RBX: ffff891bda4b0668 RCX: 0000000000000000 [ 71.915777] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 71.915779] RBP: ffffcf0800eafa50 R08: 0000000000000000 R09: 0000000000000000 [ 71.915781] R10: 0000000000000000 R11: 0000000000000000 R12: ffff891bda480000 [ 71.915782] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 71.915792] FS: 000070cff87c4c40(0000) GS:ffff893abfb80000(0000) knlGS:0000000000000000 [ 71.915795] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.915797] CR2: 00005fa13073e478 CR3: 000000010d634006 CR4: 0000000000770ef0 [ 71.915800] PKRU: 55555554 [ 71.915802] Call Trace: [ 71.915805] <TASK> [ 71.915809] vcn_v2_5_hw_fini+0x19e/0x1e0 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rga: Fix possible ERR_PTR dereference in rga_buf_init() rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is unsupported or invalid. rga_buf_init() does not check the return value and unconditionally dereferences the pointer when accessing f->size. Add proper ERR_PTR checking and return the error to prevent dereferencing an invalid pointer.

In the Linux kernel, the following vulnerability has been resolved: rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net() When idtab allocation fails, net is not registered with rio_add_net() yet, so kfree(net) is sufficient to release the memory. Set mport->net to NULL to avoid dangling pointer.

In the Linux kernel, the following vulnerability has been resolved: drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panels Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L") we may get the following kernel panic, for some panels, when rebooting: systemd-shutdown[1]: Rebooting. Call trace: ... do_serror+0x28/0x68 el1h_64_error_handler+0x34/0x50 el1h_64_error+0x6c/0x70 rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P) mipi_dsi_device_transfer+0x44/0x58 mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4 ili9881c_unprepare+0x38/0x88 drm_panel_unprepare+0xbc/0x108 This happens for panels that need to send MIPI-DSI commands in their unprepare() callback. Since the MIPI-DSI interface is stopped at that point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic. Fix by moving rzg2l_mipi_dsi_stop() to new callback function rzg2l_mipi_dsi_atomic_post_disable(). With this change we now have the correct power-down/stop sequence: systemd-shutdown[1]: Rebooting. rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry reboot: Restarting system

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix kthread worker destruction in polling mode Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings during module removal. Cancel the hrtimer before destroying the kthread worker to ensure work queues are empty. In polling mode, the driver uses hrtimer to periodically trigger wave5_vpu_timer_callback() which queues work via kthread_queue_work(). The kthread_destroy_worker() function validates that both work queues are empty with WARN_ON(!list_empty(&worker->work_list)) and WARN_ON(!list_empty(&worker->delayed_work_list)). The original code called kthread_destroy_worker() before hrtimer_cancel(), creating a race condition where the timer could fire during worker destruction and queue new work, triggering the WARN_ON. This causes the following warning on every module unload in polling mode: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1034 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 Modules linked in: wave5(-) rpmsg_ctrl rpmsg_char ... Call trace: kthread_destroy_worker+0x84/0x98 wave5_vpu_remove+0xc8/0xe0 [wave5] platform_remove+0x30/0x58 ... ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during vmalloc cleanup triggers expensive stack unwinding that acquires RCU read locks. Processing a large purge_list without rescheduling can cause the task to hold CPU for extended periods (10+ seconds), leading to RCU stalls and potential OOM conditions. The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node() where iterating through hundreds or thousands of vmap_area entries and freeing their associated shadow pages causes: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l ... task:kworker/0:17 state:R running task stack:28840 pid:6229 ... kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299 purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299 Each call to kasan_release_vmalloc() can free many pages, and with page_owner tracking, each free triggers save_stack() which performs stack unwinding under RCU read lock. Without yielding, this creates an unbounded RCU critical section. Add periodic cond_resched() calls within the loop to allow: - RCU grace periods to complete - Other tasks to run - Scheduler to preempt when needed The fix uses need_resched() for immediate response under load, with a batch count of 32 as a guaranteed upper bound to prevent worst-case stalls even under light load.

In the Linux kernel, the following vulnerability has been resolved: kexec: derive purgatory entry from symbol kexec_load_purgatory() derives image->start by locating e_entry inside an SHF_EXECINSTR section. If the purgatory object contains multiple executable sections with overlapping sh_addr, the entrypoint check can match more than once and trigger a WARN. Derive the entry section from the purgatory_start symbol when present and compute image->start from its final placement. Keep the existing e_entry fallback for purgatories that do not expose the symbol. WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784 Call Trace: <TASK> bzImage64_load+0x133/0xa00 __do_sys_kexec_file_load+0x2b3/0x5c0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e [me@linux.beauty: move helper to avoid forward declaration, per Baoquan]

In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W 6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none) RIP: 0010:percpu_counter_add_batch+0x13/0xa0 Call Trace: <TASK> ext4_mark_group_bitmap_corrupted+0xcb/0xe0 ext4_validate_block_bitmap+0x2a1/0x2f0 ext4_read_block_bitmap+0x33/0x50 mb_group_bb_bitmap_alloc+0x33/0x80 ext4_mb_add_groupinfo+0x190/0x250 ext4_mb_init_backend+0x87/0x290 ext4_mb_init+0x456/0x640 __ext4_fill_super+0x1072/0x1680 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4f6/0x6b0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== This issue can be reproduced using the following commands: mkfs.ext4 -F -q -b 1024 /dev/sda 5G tune2fs -O quota,project /dev/sda mount /dev/sda /tmp/test With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads and validates the block bitmap. When the validation fails, ext4_mark_group_bitmap_corrupted() attempts to update sbi->s_freeclusters_counter. However, this percpu_counter has not been initialized yet at this point, which leads to the panic described above. Fix this by moving the execution of ext4_percpu_param_init() to occur before ext4_mb_init(), ensuring the per-CPU counters are initialized before they are used.

In the Linux kernel, the following vulnerability has been resolved: drm: Account property blob allocations to memcg DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kernel memory growth without introducing additional policy or per-file limits.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: restore failed global reservations to subpool Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool") fixed an underflow error for hstate->resv_huge_pages caused by incorrectly attributing globally requested pages to the subpool's reservation. Unfortunately, this fix also introduced the opposite problem, which would leave spool->used_hpages elevated if the globally requested pages could not be acquired. This is because while a subpool's reserve pages only accounts for what is requested and allocated from the subpool, its "used" counter keeps track of what is consumed in total, both from the subpool and globally. Thus, we need to adjust spool->used_hpages in the other direction, and make sure that globally requested pages are uncharged from the subpool's used counter. Each failed allocation attempt increments the used_hpages counter by how many pages were requested from the global pool. Ultimately, this renders the subpool unusable, as used_hpages approaches the max limit. The issue can be reproduced as follows: 1. Allocate 4 hugetlb pages 2. Create a hugetlb mount with max=4, min=2 3. Consume 2 pages globally 4. Request 3 pages from the subpool (2 from subpool + 1 from global) 4.1 hugepage_subpool_get_pages(spool, 3) succeeds. used_hpages += 3 4.2 hugetlb_acct_memory(h, 1) fails: no global pages left used_hpages -= 2 5. Subpool now has used_hpages = 1, despite not being able to successfully allocate any hugepages. It believes it can now only allocate 3 more hugepages, not 4. With each failed allocation attempt incrementing the used counter, the subpool eventually reaches a point where its used counter equals its max counter. At that point, any future allocations that try to allocate hugeTLB pages from the subpool will fail, despite the subpool not having any of its hugeTLB pages consumed by any user. Once this happens, there is no way to make the subpool usable again, since there is no way to decrement the used counter as no process is really consuming the hugeTLB pages. The underflow issue that the original commit fixes still remains fixed as well. Without this fix, used_hpages would keep on leaking if hugetlb_acct_memory() fails.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not access current->mems_allowed_seq if !allow_spin Lockdep complains when get_from_any_partial() is called in an NMI context, because current->mems_allowed_seq is seqcount_spinlock_t and not NMI-safe: ================================ WARNING: inconsistent lock state 6.19.0-rc5-kfree-rcu+ #315 Tainted: G N -------------------------------- inconsistent {INITIAL USE} -> {IN-NMI} usage. kunit_try_catch/9989 [HC1[1]:SC0[0]:HE0:SE1] takes: ffff889085799820 (&____s->seqcount#3){.-.-}-{0:0}, at: ___slab_alloc+0x58f/0xc00 {INITIAL USE} state was registered at: lock_acquire+0x185/0x320 kernel_init_freeable+0x391/0x1150 kernel_init+0x1f/0x220 ret_from_fork+0x736/0x8f0 ret_from_fork_asm+0x1a/0x30 irq event stamp: 56 hardirqs last enabled at (55): [<ffffffff850a68d7>] _raw_spin_unlock_irq+0x27/0x70 hardirqs last disabled at (56): [<ffffffff850858ca>] __schedule+0x2a8a/0x6630 softirqs last enabled at (0): [<ffffffff81536711>] copy_process+0x1dc1/0x6a10 softirqs last disabled at (0): [<0000000000000000>] 0x0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&____s->seqcount#3); <Interrupt> lock(&____s->seqcount#3); *** DEADLOCK *** According to Documentation/locking/seqlock.rst, seqcount_t is not NMI-safe and seqcount_latch_t should be used when read path can interrupt the write-side critical section. In this case, do not access current->mems_allowed_seq and avoid retry.

go-git is an extensible git implementation library written in pure Go. Prior to versions 5.18.0 and 6.0.0-alpha.2, go-git may leak HTTP authentication credentials when following redirects during smart-HTTP clone and fetch operations. This issue has been patched in versions 5.18.0 and 6.0.0-alpha.2.

Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to versions 19.2.21, 20.3.19, 21.2.9, and 22.0.0-next.8, a Server-Side Request Forgery (SSRF) vulnerability exists in @angular/platform-server due to improper handling of URLs during Server-Side Rendering (SSR). When an attacker sends a request such as GET /\evil.com/ HTTP/1.1 the server engine (Express, etc.) passes the URL string to Angular’s rendering functions. Because the URL parser normalizes the backslash to a forward slash for HTTP/HTTPS schemes, the internal state of the application is hijacked to believe the current origin is evil.com. This misinterpretation tricks the application into treating the attacker’s domain as the local origin. Consequently, any relative HttpClient requests or PlatformLocation.hostname references are redirected to the attacker controlled server, potentially exposing internal APIs or metadata services. This issue has been patched in versions 19.2.21, 20.3.19, 21.2.9, and 22.0.0-next.8.

Sync-in Server is a secure, open-source platform for file storage, sharing, collaboration, and syncing. Prior to version 2.2.0, the /api/auth/login endpoint contains a logic flaw that allows unauthenticated remote attackers to enumerate valid usernames by measuring the application's response time. This issue has been patched in version 2.2.0.

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around vmap/vunmap Acquire and release the GEM object's reservation lock around vmap and vunmap operations. The tests use vmap_locked, which led to errors such as show below. [ 122.292030] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:390 drm_gem_shmem_vmap_locked+0x3a3/0x6f0 [ 122.468066] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:293 drm_gem_shmem_pin_locked+0x1fe/0x350 [ 122.563504] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:234 drm_gem_shmem_get_pages_locked+0x23c/0x370 [ 122.662248] WARNING: CPU: 2 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:452 drm_gem_shmem_vunmap_locked+0x101/0x330 Only export the new vmap/vunmap helpers for Kunit tests. These are not interfaces for regular drivers.

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Parse DT for flashes with the rest of the DT parsing The recent refactoring of where runtime PM is enabled done in commit f1eb4e792bb1 ("spi: spi-cadence-quadspi: Enable pm runtime earlier to avoid imbalance") made the fact that when we do a pm_runtime_disable() in the error paths of probe() we can trigger a runtime disable which in turn results in duplicate clock disables. This is particularly likely to happen when there is missing or broken DT description for the flashes attached to the controller. Early on in the probe function we do a pm_runtime_get_noresume() since the probe function leaves the device in a powered up state but in the error path we can't assume that PM is enabled so we also manually disable everything, including clocks. This means that when runtime PM is active both it and the probe function release the same reference to the main clock for the IP, triggering warnings from the clock subsystem: [ 8.693719] clk:75:7 already disabled [ 8.693791] WARNING: CPU: 1 PID: 185 at /usr/src/kernel/drivers/clk/clk.c:1188 clk_core_disable+0xa0/0xb ... [ 8.694261] clk_core_disable+0xa0/0xb4 (P) [ 8.694272] clk_disable+0x38/0x60 [ 8.694283] cqspi_probe+0x7c8/0xc5c [spi_cadence_quadspi] [ 8.694309] platform_probe+0x5c/0xa4 Dealing with this issue properly is complicated by the fact that we don't know if runtime PM is active so can't tell if it will disable the clocks or not. We can, however, sidestep the issue for the flash descriptions by moving their parsing to when we parse the controller properties which also save us doing a bunch of setup which can never be used so let's do that.

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around madvise Acquire and release the GEM object's reservation lock around calls to the object's madvide operation. The tests use drm_gem_shmem_madvise_locked(), which led to errors such as show below. [ 58.339389] WARNING: CPU: 1 PID: 1352 at drivers/gpu/drm/drm_gem_shmem_helper.c:499 drm_gem_shmem_madvise_locked+0xde/0x140 Only export the new helper drm_gem_shmem_madvise() for Kunit tests. This is not an interface for regular drivers.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode() rtw8822b_set_antenna() can be called from userspace when the chip is powered off. In that case a WARNING is triggered in rtw8822b_config_trx_mode() because trying to read the RF registers when the chip is powered off returns an unexpected value. Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when the chip is powered on. ------------[ cut here ]------------ write RF mode table fail WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021 RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] Call Trace: <TASK> rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b] rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb] ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3] nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? netdev_run_todo+0x63/0x550 genl_family_rcv_msg_doit+0xfc/0x160 genl_rcv_msg+0x1aa/0x2b0 ? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 ? refill_obj_stock+0x12e/0x240 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? do_syscall_64+0x81/0x970 ? ksys_read+0x73/0xf0 ? do_syscall_64+0x81/0x970 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]---