CVE Database

bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU shorter than the SDU header. Because net_buf_simple_pull_mem only guards length with __ASSERT_NO_MSG (compiled out when CONFIG_ASSERT is disabled, the production default), the pull underflows buf->len (uint16_t, e.g. 0 - 8 = 0xFFF8) and advances buf->data past valid data: the subsequent reads of hdr->slen and hdr->sn are out-of-bounds reads of adjacent pool memory. For the multi-fragment (START) case the corrupted buffer is retained as iso->rx, and a following CONT/END fragment's net_buf_tailroom() guard underflows to a near-SIZE_MAX value, defeating the bounds check and causing net_buf_add_mem() to memcpy attacker-supplied fragment data far past the RX pool buffer (out-of-bounds write). The flaw affects ISO receive builds (CONFIG_BT_ISO_RX, selected by the default-off LE Audio options BT_ISO_PERIPHERAL/BT_ISO_CENTRAL/BT_ISO_SYNC_RECEIVER) and has existed since the ISO subsystem was introduced (v2.6.0) through v4.4.0. The fix adds explicit buf->len < sizeof(ts_hdr) and buf->len < sizeof(hdr) checks that drop the buffer before pulling.

bt_sdp_parse_attribute() in subsys/bluetooth/host/classic/sdp.c validated only that the SDP record buffer held the type-marker byte plus the 2-byte attribute ID (a check of buf->len < 3) but then read a fourth byte, the data-element descriptor (type), via net_buf_simple_pull_u8(). Because net_buf_simple_pull_u8() dereferences buf->data[0] before its only bounds guard (an __ASSERT_NO_MSG that compiles out when CONFIG_ASSERT is disabled, the production default), a record of exactly three bytes (0x09 followed by a 2-byte attribute ID) causes a one-byte read past the end of the logical buffer. The parser is reachable from inbound, remote-controlled data: a Bluetooth BR/EDR peer acting as an SDP server returns discovery-response records that are stored verbatim in the client receive buffer and parsed via the public bt_sdp_get_attr()/bt_sdp_has_attr()/bt_sdp_record_parse() helpers. The over-read is bounded to a single byte that is used only as an internal length selector and is never leaked to the attacker; subsequent length checks then reject the malformed record. Realistic impact is therefore limited to an edge-case denial of service (a fault only if the record ends exactly at a mapped-memory boundary, or a deterministic assert panic when CONFIG_ASSERT=y). Affects Zephyr v4.3.0 and v4.4.0; fixed by adding sizeof(type) to the length check.

vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.22.1, the vLLM Dockerfile is vulnerable to a dependency confusion attack through the flashinfer-jit-cache package. The package is installed from a custom index (flashinfer.ai/whl/) using --extra-index-url, but the package name was not registered on PyPI, and UV_INDEX_STRATEGY="unsafe-best-match" is set globally. An attacker who registers flashinfer-jit-cache on PyPI with version 0.6.11.post2 can execute arbitrary code as root during the Docker build and backdoor every resulting container image, enabling exfiltration of all user prompts, API credentials, and model data from production vLLM deployments This vulnerability is fixed in 0.22.1.

vLLM is an inference and serving engine for large language models (LLMs). From 0.5.5 until 0.23.1rc0, integer truncation of tensor dimensions in vLLM's GGUF dequantize kernels (csrc/quantization/gguf/gguf_kernel.cu) causes partial tensor processing. The output tensor is allocated at full size via torch::empty (uninitialized memory), but the dequantize CUDA kernel processes only a truncated number of elements. The unfilled portion of the output tensor retains whatever was previously in GPU memory. In multi-tenant inference deployments, this residual GPU memory may contain tensor data from other users' inference requests, constituting information disclosure. This vulnerability is fixed in 0.23.1rc0.

vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.22.0, an assert-based security check in vLLM's activation function loading allows any unauthenticated attacker to achieve arbitrary code execution on the server by publishing a malicious HuggingFace model, when vLLM runs in Python optimized mode (python -O or PYTHONOPTIMIZE=1). This vulnerability is fixed in 0.22.0.

Capgo before 12.128.2 contains a rate limit bypass vulnerability in the channel_self endpoint that allows attackers to circumvent rate limiting by rotating the user-controlled device_id parameter. Attackers can send multiple requests per second by changing device_id values to flood the channel_devices table and cause database exhaustion.

Capgo before 12.128.2 contains an information disclosure vulnerability in the /functions/v1/channel_self endpoint that allows unauthenticated attackers to enumerate non-public channel names and determine app existence and subscription status. Remote attackers can send GET requests with arbitrary app_id parameters to disclose internal rollout channels, enumerate valid applications across tenants, and leak billing status without authentication or device binding.

Capgo before 12.128.12 fails to filter deleted app versions when joining channels during /updates resolution, allowing deleted bundles to remain selectable. Attackers can continue deploying deleted bundles to devices by exploiting the missing app_versions.deleted filter in channel version joins.

Cap-go before 12.128.2 contains a privilege inversion vulnerability in GET /build/logs/:jobId that allows read-only API key holders to cancel running native builds. The endpoint registers an abort listener on the SSE stream that unconditionally invokes cancelBuildOnDisconnect() using the privileged server-side BUILDER_API_KEY when clients disconnect, bypassing the app.build_native permission check required by the explicit POST /build/cancel/:jobId endpoint. Attackers with read-only API keys can repeatedly disrupt native build operations and CI/CD workflows by opening the log stream and dropping the connection.

Flowise before 3.1.2 contains an information disclosure vulnerability in the /api/v1/chatflows/apikey/:apikey endpoint. When the keyonly query parameter is omitted (the default), the endpoint returns not only the chatflows bound to the supplied API key but also all chatflows across every workspace that have no API key assigned, because the underlying query lacks any workspace filter. An attacker with a valid API key for one workspace can therefore retrieve the full ChatFlow configuration (including flowData with system prompts and node configurations, chatbotConfig, apiConfig, and credential IDs) of unprotected chatflows belonging to other workspaces.

Crawl4AI before 0.8.7 contains a server-side request forgery vulnerability in the /crawl, /crawl/stream, /md, and /llm endpoints that fetch arbitrary user-supplied URLs without validation. Unauthenticated attackers can bypass the internal-address blocklist using IPv6-mapped IPv4 addresses to reach internal services and cloud metadata endpoints.

Filament is a collection of full-stack components for accelerated Laravel development. From 3.0.0 until 3.3.53, a disabled RichEditor field rendered its raw state without sanitizing HTML. Where the data stored in this field's state isn't sanitized already when the form state was filled, an attacker could plant malicious HTML or JavaScript and achieve XSS that executes for users who view the form. This vulnerability is fixed in 3.3.53.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePack-CSharp's typeless deserialization includes MessagePackSerializerOptions.ThrowIfDeserializingTypeIsDisallowed(Type) as a safety check for dangerous types. The default implementation checks the outer type name, but it does not recursively inspect array element types or generic type arguments. As a result, a type that would be blocked directly can be wrapped inside an array or constructed generic type and pass the outer type check. The formatter machinery can then materialize formatters for the inner blocked type. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, InterfaceLookupFormatter<TKey,TElement> constructs an internal Dictionary<TKey, IGrouping<TKey,TElement>> with the default equality comparer instead of the security-aware comparer supplied by options.Security.GetEqualityComparer<TKey>(). This formatter omission allows hash-collision CPU denial of service against ILookup<TKey,TElement> even when the application has opted into the untrusted-data security posture This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePack-CSharp's multi-dimensional array formatters read dimension lengths directly from the payload and allocate T[,], T[,,], or T[,,,] before validating that the dimension product matches the encoded element count. The formatter reads a guarded element array header, but allocation of the target multi-dimensional array happens before the dimensions are checked against that element count. A small payload can therefore declare large dimensions, provide an empty or tiny inner array, and cause a large heap allocation before element data is validated. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, UnsafeBlitFormatterBase<T>.Deserialize reads an attacker-controlled byteLength from an extension payload and allocates an array based on that value before validating it against the extension header length or remaining payload bytes. The outer extension header is bounded by available input, but that bound is not used to constrain the inner byteLength before allocation. A very small payload can therefore request a very large T[] allocation. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, runtime-generated union deserializers emitted by DynamicUnionResolver do not call MessagePackSecurity.DepthStep(ref reader) and do not decrement reader.Depth around recursive deserialization and skip paths. This means union deserialization does not consistently participate in the maximum object graph depth enforcement that protects other recursive formatter paths. For unknown union keys, the emitted deserializer calls reader.Skip() on attacker-controlled data without an enclosing depth step. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePack-CSharp's JSON conversion helpers contain multiple recursion paths that do not consistently enforce a depth limit. These paths are in the JSON conversion component rather than normal typed MessagePack deserialization. MessagePackSerializer.ConvertFromJson recursively processes nested JSON arrays and objects in FromJsonCore() without consulting MessagePackSecurity.MaximumObjectGraphDepth. TinyJsonReader.ReadNextToken() recursively consumes comma and colon separator characters, allowing even malformed JSON with long separator runs to consume one stack frame per character. MessagePackSerializer.ConvertToJson applies depth checks to arrays and maps, but the typeless extension branch for ext-100 recursively calls ToJsonCore() without applying MessagePackSecurity.DepthStep(ref reader). Each path can allow attacker-controlled input to exhaust the process stack and trigger an uncatchable StackOverflowException instead of failing with a catchable parse or serialization exception. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, ExpandoObjectFormatter.Deserialize populates System.Dynamic.ExpandoObject by calling IDictionary<string, object>.Add for each map entry. ExpandoObject internally maintains member names in array-like structures, so inserting many distinct keys can require repeated linear scans and array copies. For large attacker-controlled maps, this produces quadratic CPU and allocation behavior. The issue is especially surprising because ExpandoObjectResolver.Options is configured with MessagePackSecurity.UntrustedData, but collision-resistant dictionary comparers cannot protect ExpandoObject insertion internals. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, when MessagePack-CSharp decompresses Lz4Block or Lz4BlockArray payloads, it reads declared uncompressed lengths from the wire and allocates output buffers based on those lengths before validating that the compressed data is valid or that the declared expansion is reasonable. A small payload can claim a very large uncompressed length and force a large allocation before LZ4 decoding begins. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.TrySkip() recursively descends into nested arrays and maps without incrementing the reader depth or calling the configured depth checks. This bypasses MessagePackSecurity.MaximumObjectGraphDepth, the library's documented protection against deeply nested object graphs. Many generated and dynamic formatters call reader.Skip() when they encounter unknown map keys, unknown array members, ignored fields, or data that should be skipped for forward compatibility. A deeply nested value in one of these skipped positions can therefore cause unbounded recursion and an uncatchable StackOverflowException. This vulnerability is fixed in 2.5.301 and 3.1.7.

Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.11.5 and 5.6.5, a flaw in the handling of recovery codes for app-based multi-factor authentication allows the same recovery code to be reused via concurrent submission. This issue does not affect email-based MFA. It also only applies when recovery codes are enabled. If an attacker gains access to both the user's password and their recovery codes, they get two authenticated sessions per recovery code burned instead of one, or more if they batch the parallel submissions wider, materially extending the attacker's window of access compared to what the single-use guarantee implies. This vulnerability is fixed in 4.11.5 and 5.6.5.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.ReadDateTime() can allocate stack memory based on an attacker-controlled MessagePack extension length. In the slow path for timestamp extension parsing, the computed tokenSize includes the extension body length from the wire and is used in a stackalloc operation before the extension length is validated as one of the valid timestamp sizes. A very small payload can claim a large timestamp extension body and cause a stack allocation large enough to trigger an uncatchable StackOverflowException, terminating the host process. This vulnerability is fixed in 2.5.301 and 3.1.7.

MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, A vulnerability exists in the optional LZ4 decompression path used by MessagePack compression modes Lz4Block and Lz4BlockArray. The decoder implementation is based on a deprecated fast-decompression algorithm that does not take a source-length bound. A remote attacker can send a crafted MessagePack payload with manipulated LZ4 token/length fields to force out-of-bounds reads from the compressed input buffer. In affected environments, this can trigger an AccessViolationException during decompression, causing process termination (denial of service). Under some conditions, limited unintended memory disclosure from over-read data may also be possible before failure. This vulnerability is fixed in 2.5.301 and 3.1.7.

picklescan before 0.0.29 fails to detect malicious pickle files that exploit idlelib.autocomplete.AutoComplete.get_entity function in reduce methods. Attackers can embed undetected code in pickle files that executes arbitrary commands when loaded by victims using pickle.load().

picklescan before 0.0.30 (affected versions 0.0.26 and earlier) fails to detect the ensurepip._run_pip built-in function when scanning pickle files, allowing attackers to execute arbitrary code. Malicious pickle files embedding ensurepip._run_pip calls in __reduce__ methods bypass picklescan detection and achieve remote code execution upon pickle.load() invocation.

Picklescan before 0.0.33 fails to detect the numpy.f2py.crackfortran._eval_length gadget in pickle __reduce__ methods, allowing arbitrary code execution. Attackers can craft malicious pickle files that execute arbitrary Python code when loaded by victims who trust Picklescan's safety validation.

http-proxy-middleware is node.js http-proxy middleware. From 3.0.4 until 3.0.7 and 4.1.1, fixRequestBody() is the library's documented helper for re-emitting a request body that was already consumed by a body parser. When the outgoing Content-Type is multipart/form-data, it rebuilds the body with handlerFormDataBodyData(), which interpolates each req.body key and value directly into the multipart wire format without neutralizing CR/LF. A \r\n inside a value (or key) lets an attacker close the current part and inject an entirely new form part. Because the proxy's own body parser saw a single opaque value, any gateway-side policy or validation performed on req.body is evaluated against a different set of fields than the upstream backend ultimately parses a request/parameter desynchronization across the trust boundary. This vulnerability is fixed in 3.0.7 and 4.1.1.

Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain an Improper Link Resolution Before File Access vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized access.

Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access.