CVE Database

In the Linux kernel, the following vulnerability has been resolved: fbnic: close fw_log race between users and teardown Fixes a theoretical race on fw_log between the teardown path and fw_log write functions. fw_log is written inside fbnic_fw_log_write() and can be reached from the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before IRQ/MBX teardown during cleanup, resulting in a potential data race of dereferencing a freed/null variable. Possible Interleaving Scenario: CPU0: fbnic_fw_msix_intr() // Entry fbnic_fw_log_write() if (fbnic_fw_log_ready()) // true ... preempt ... CPU1: fbnic_remove() // Entry fbnic_fw_log_free() vfree(log->data_start); log->data_start = NULL; CPU0: continues, walks log->entries or writes to log->data_start The initialization also has an incorrect order problem, as the fw_log is currently allocated after MBX setup during initialization. Fix the problems by adjusting the synchronization order to put initialization in place before the mailbox is enabled, and not cleared until after the mailbox has been disabled.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_ras_init() When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function returns directly without freeing the allocated con structure, leading to a memory leak. Fix this by jumping to the release_con label to properly clean up the allocated memory before returning the error code. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in userspace-mapped memory. It's racy to access its fields with normal loads, as userspace may write to them concurrently. Use READ_ONCE() to copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the local copy in place of the one in the io_uring_sqe.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found If btrfs_search_slot_for_read() returns 1, it means we did not find any key greater than or equals to the key we asked for, meaning we have reached the end of the tree and therefore the path is not valid. If this happens we need to break out of the loop and stop, instead of continuing and accessing an invalid path.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40

In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc).

In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Add missing check for input_ff_create_memless The ps_gamepad_create() function calls input_ff_create_memless() without verifying its return value, which can lead to incorrect behavior or potential crashes when FF effects are triggered. Add a check for the return value of input_ff_create_memless().

In the Linux kernel, the following vulnerability has been resolved: cpuidle: Skip governor when only one idle state is available On certain platforms (PowerNV systems without a power-mgt DT node), cpuidle may register only a single idle state. In cases where that single state is a polling state (state 0), the ladder governor may incorrectly treat state 1 as the first usable state and pass an out-of-bounds index. This can lead to a NULL enter callback being invoked, ultimately resulting in a system crash. [ 13.342636] cpuidle-powernv : Only Snooze is available [ 13.351854] Faulting instruction address: 0x00000000 [ 13.376489] NIP [0000000000000000] 0x0 [ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668 Fix this by adding a bail-out in cpuidle_select() that returns state 0 directly when state_count <= 1, bypassing the governor and keeping the tick running.

In the Linux kernel, the following vulnerability has been resolved: bpf: Return proper address for non-zero offsets in insn array The map_direct_value_addr() function of the instruction array map incorrectly adds offset to the resulting address. This is a bug, because later the resolve_pseudo_ldimm64() function adds the offset. Fix it. Corresponding selftests are added in a consequent commit.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in __unix_needs_revalidation When receiving file descriptors via SCM_RIGHTS, both the socket pointer and the socket's sk pointer can be NULL during socket setup or teardown, causing NULL pointer dereferences in __unix_needs_revalidation(). This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new __unix_needs_revalidation() function was added without proper NULL checks. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0x0000000000000018 RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0) Call Trace: apparmor_file_receive+0x42/0x80 security_file_receive+0x2e/0x50 receive_fd+0x1d/0xf0 scm_detach_fds+0xad/0x1c0 The function dereferences sock->sk->sk_family without checking if either sock or sock->sk is NULL first. Add NULL checks for both sock and sock->sk before accessing sk_family.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix invalid deref of rawdata when export_binary is unset If the export_binary parameter is disabled on runtime, profiles that were loaded before that will still have their rawdata stored in apparmorfs, with a symbolic link to the rawdata on the policy directory. When one of those profiles are replaced, the rawdata is set to NULL, but when trying to resolve the symbolic links to rawdata for that profile, it will try to dereference profile->rawdata->name when profile->rawdata is now NULL causing an oops. Fix it by checking if rawdata is set. [ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088 [ 168.657420] #PF: supervisor read access in kernel mode [ 168.660619] #PF: error_code(0x0000) - not-present page [ 168.663613] PGD 0 P4D 0 [ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI [ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary) [ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330 [ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8 [ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282 [ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158 [ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80 [ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000 [ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80 [ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0 [ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000 [ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0 [ 168.701696] Call Trace: [ 168.702325] <TASK> [ 168.702995] rawdata_get_link_data+0x1c/0x30 [ 168.704145] vfs_readlink+0xd4/0x160 [ 168.705152] do_readlinkat+0x114/0x180 [ 168.706214] __x64_sys_readlink+0x1e/0x30 [ 168.708653] x64_sys_call+0x1d77/0x26b0 [ 168.709525] do_syscall_64+0x81/0x500 [ 168.710348] ? do_statx+0x72/0xb0 [ 168.711109] ? putname+0x3e/0x80 [ 168.711845] ? __x64_sys_statx+0xb7/0x100 [ 168.712711] ? x64_sys_call+0x10fc/0x26b0 [ 168.713577] ? do_syscall_64+0xbf/0x500 [ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0 [ 168.715404] ? irqentry_exit+0xb2/0x740 [ 168.716359] ? exc_page_fault+0x90/0x1b0 [ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done in gss_release_msg(), but forgot to add a corresponding kref_put() on the error path when kstrdup_const() fails. If service_name is non-NULL and kstrdup_const() fails, the function jumps to err_put_pipe_version which calls put_pipe_version() and kfree(gss_msg), but never releases the gss_auth reference. This leads to a kref leak where the gss_auth structure is never freed. Add a forward declaration for gss_free_callback() and call kref_put() in the err_put_pipe_version error path to properly release the reference taken earlier.

In the Linux kernel, the following vulnerability has been resolved: ASoC: nau8821: Cancel delayed work on component remove Attempting to unload the driver while a jack detection work is pending would likely crash the kernel when it is eventually scheduled for execution: [ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20 [...] [ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821] [ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0 [...] [ 1984.896504] Call Trace: [ 1984.896511] <TASK> [ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821] [ 1984.896636] process_one_work+0x211/0x590 [ 1984.896649] ? srso_return_thunk+0x5/0x5f [ 1984.896670] worker_thread+0x1cd/0x3a0 Cancel unscheduled jdet_work or wait for its execution to finish before the component driver gets removed.

In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set.

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix memory leaks in gfs2_fill_super error path Fix two memory leaks in the gfs2_fill_super() error handling path when transitioning a filesystem to read-write mode fails. First leak: kthread objects (thread_struct, task_struct, etc.) When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the created kernel threads (logd and quotad) are never destroyed. This occurs because the fail_per_node label doesn't call gfs2_destroy_threads(). Second leak: quota bitmap buffer (8192 bytes) When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but before other operations complete, the allocated quota bitmap is never freed. The fix moves thread cleanup to the fail_per_node label to handle all error paths uniformly. gfs2_destroy_threads() is safe to call unconditionally as it checks for NULL pointers. Quota cleanup is added in gfs2_make_fs_rw() to properly handle the withdrawal case where quota initialization succeeds but the filesystem is then withdrawn. Thread leak backtrace (gfs2_freeze_lock_shared failure): unreferenced object 0xffff88801d7bca80 (size 4480): copy_process+0x3a1/0x4670 kernel/fork.c:2422 kernel_clone+0xf3/0x6e0 kernel/fork.c:2779 kthread_create_on_node+0x100/0x150 kernel/kthread.c:478 init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611 gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265 Quota leak backtrace (gfs2_make_fs_rw failure): unreferenced object 0xffff88812de7c000 (size 8192): gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409 gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149 gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275

In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values.

In the Linux kernel, the following vulnerability has been resolved: fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe() In au1200fb_drv_probe(), when platform_get_irq fails(), it directly returns from the function with an error code, which causes a memory leak. Replace it with a goto label to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix IO hang with degraded array with llbitmap When llbitmap bit state is still unwritten, any new write should force rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying(). However, later the same check is missing in need_this_block(), causing stripe to deadloop during handling because handle_stripe() will decide to go to handle_stripe_fill(), meanwhile need_this_block() always return 0 and nothing is handled.

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Add validation for MTU changes Increasing the MTU beyond the HDS threshold causes the hardware to fragment packets across multiple buffers. If a single-buffer XDP program is attached, the driver will drop all multi-frag frames. While we can't prevent a remote sender from sending non-TCP packets larger than the MTU, this will prevent users from inadvertently breaking new TCP streams. Traditionally, drivers supported XDP with MTU less than 4Kb (packet per page). Fbnic currently prevents attaching XDP when MTU is too high. But it does not prevent increasing MTU after XDP is attached.

In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req() The starfive_aes_aead_do_one_req() function allocates rctx->adata with kzalloc() but fails to free it if sg_copy_to_buffer() or starfive_aes_hw_init() fails, which lead to memory leaks. Since rctx->adata is unconditionally freed after the write_adata operations, ensure consistent cleanup by freeing the allocation in these earlier error paths as well. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_ext_shift_extents() In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the function returns immediately without releasing the path obtained via ext4_find_extent(), leading to a memory leak. Fix this by jumping to the out label to ensure the path is properly released.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure get_burstcount() can return -EBUSY on timeout. When this happens, the function returns directly without releasing the locality that was acquired at the beginning of tpm_tis_i2c_send(). Use goto out_err to ensure proper cleanup when get_burstcount() fails.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix oops when split header is enabled For GMAC4, when split header is enabled, in some rare cases, the hardware does not fill buf2 of the first descriptor with payload. Thus we cannot assume buf2 is always fully filled if it is not the last descriptor. Otherwise, the length of buf2 of the second descriptor will be calculated wrong and cause an oops: Unable to handle kernel paging request at virtual address ffff00019246bfc0 ... x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000 Call trace: dcache_inval_poc+0x28/0x58 (P) dma_direct_sync_single_for_cpu+0x38/0x6c __dma_sync_single_for_cpu+0x34/0x6c stmmac_napi_poll_rx+0x8f0/0xb60 __napi_poll.constprop.0+0x30/0x144 net_rx_action+0x160/0x274 handle_softirqs+0x1b8/0x1fc ... To fix this, the PL bit-field in RDES3 register is used for all descriptors, whether it is the last descriptor or not.

In the Linux kernel, the following vulnerability has been resolved: gpib: Fix memory leak in ni_usb_init() In ni_usb_init(), if ni_usb_setup_init() fails, the function returns -EFAULT without freeing the allocated writes buffer, leading to a memory leak. Additionally, ni_usb_setup_init() returns 0 on failure, which causes ni_usb_init() to return -EFAULT, an inappropriate error code for this situation. Fix the leak by freeing writes in the error path. Modify ni_usb_setup_init() to return -EINVAL on failure and propagate this error code in ni_usb_init().

In the Linux kernel, the following vulnerability has been resolved: crypto: inside-secure/eip93 - fix kernel panic in driver detach During driver detach, the same hash algorithm is unregistered multiple times due to a wrong iterator.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation I have been observing a number of systems aborting at insert_dev_extents() in btrfs_create_pending_block_groups(). The following is a sample stack trace of such an abort coming from forced chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this can theoretically happen to any DUP chunk allocation. [81.801] ------------[ cut here ]------------ [81.801] BTRFS: Transaction aborted (error -17) [81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319 [81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk [81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE [81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 [81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs] [81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282 [81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000 [81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0 [81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007 [81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000 [81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000 [81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000 [81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0 [81.810] Call Trace: [81.810] <TASK> [81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs] [81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs] [81.811] kernfs_fop_write_iter+0x15f/0x240 [81.812] vfs_write+0x264/0x500 [81.812] ksys_write+0x6c/0xe0 [81.812] do_syscall_64+0x66/0x770 [81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e [81.813] RIP: 0033:0x7fec6be66197 [81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197 [81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001 [81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000 [81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002 [81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0 [81.817] </TASK> [81.817] irq event stamp: 20039 [81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60 [81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60 [81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.820] ---[ end trace 0000000000000000 ]--- [81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists Inspecting these aborts with drgn, I observed a pattern of overlapping chunk_maps. Note how stripe 1 of the first chunk overlaps in physical address with stripe 0 of the second chunk. Physical Start Physical End Length Logical Type Stripe ---------------------------------------------------------------------------------------------------- 0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2 0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2 Now how could this possibly happen? All chunk allocation is ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: mctp: ensure our nlmsg responses are initialised Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages.

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix memory leak on codec_info allocation failure In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is allocated via kzalloc(). If the subsequent allocation for inst->codec_info fails, the functions return -ENOMEM without freeing the previously allocated instance, causing a memory leak. Fix this by calling kfree() on the instance in this error path to ensure it is properly released.