CVE Database

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix buffer length in create_direct_keys() We have seen in our CI the following KASAN message: BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core] Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764 [...] [<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core] [<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core] [<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa] [<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa] [...] The buggy address is located 4128 bytes inside of allocated 4384-byte region [0000000176794000, 0000000176795120) So in essence we read 16 bytes beyond 4384-byte allocation. create_direct_keys calculates the pointer and length for in and out buffers. The size calculation for in includes the entire structure size (out + in + mtt[]) but the pointer passed to cmd_exec points only to the 'in' field, skipping the 'out' field. This causes mlx5_copy_to_msg() to read beyond the allocated buffer by sizeof(out) bytes when copying command data. Properly calculate the input size to match the pointer and allocation size.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values.

In the Linux kernel, the following vulnerability has been resolved: xsk: require at least 16 bytes of TX metadata AF_XDP accepts a TX metadata length as small as eight bytes, but every supported request needs the flags plus at least one eight-byte request field. Such short metadata also lets the kernel read beyond the registered area. Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve compatibility with applications that do not use launch-time metadata.

In the Linux kernel, the following vulnerability has been resolved: xsk: clear metadata pointer when no timestamp is requested User space can change metadata flags after request processing. Rereading them during completion can therefore make the kernel write a timestamp that was not requested when the packet was submitted. Clear the metadata pointer during request processing unless timestamp completion is requested. Completion handling can then use the pointer itself instead of rereading the flags. On the mlx5 multi-packet WQE path metadata is evaluated per batch: xsk_tx_metadata_request() runs only for the descriptor that starts a session, just like the checksum offload that is applied once through the shared WQE. Only that descriptor's pointer is reset, so completion handling can record a timestamp for the other descriptors of the session regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays inside the metadata area; the single-WQE, other zero-copy, and generic paths reset the pointer per descriptor and are unaffected.

In the Linux kernel, the following vulnerability has been resolved: xsk: validate launch-time metadata size Launch-time metadata extends beyond the first 16 bytes of struct xsk_tx_metadata. Reject the request when the registered metadata area does not contain the complete field. Snapshot the validated flags for the generic transmit path and use that snapshot for request and completion processing, avoiding inconsistent decisions if user space changes the flags concurrently. Note that only xsk_skb_metadata is properly using the flags, __xsk_buff_get_metadata ignores them. Next commits address that.

In the Linux kernel, the following vulnerability has been resolved: xsk: validate metadata when processing requests The zero-copy path validates TX metadata while obtaining the descriptor context, then reads it again later when preparing the hardware request. User space can change the metadata between those operations and bypass the original validation. Validate the metadata in xsk_tx_metadata_request() and use the resulting flags snapshot for every feature check. Read request fields once so all zero-copy drivers process only values observed after successful validation.

In the Linux kernel, the following vulnerability has been resolved: bnge: Fix NULL pointer dereference in aux device release If allocation of auxr_dev fails during auxiliary device setup, the error path calls auxiliary_device_uninit(), which eventually invokes bnge_aux_dev_release(). The release callback unconditionally dereferences aux_priv->auxr_dev->pdev to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated on this failure path, the dereference results in a NULL pointer exception Retrieve the parent bnge_dev from the auxiliary device's parent instead of auxr_dev, and free auxr_dev only when it was successfully allocated. This allows the release callback to correctly clean up partially initialized auxiliary devices.

In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter The sch_cake ACK filter parses packets to find the TCP header and filter duplicated ACKs if the flow is backlogged. The parsing code contains a WARN_ON(1) which can be triggered by a malformed IP header in certain cases. Depending on the system configuration, this leads either to either spamming dmesg with warnings, or a panic if panic_on_warn is set. The code already correctly skips the offending packet in the branch that triggers the warning, so the WARN_ON itself doesn't really serve any purpose. So just drop it altogether to avoid the inconvenient side effects.

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Validate T10 PI scatterlist counts When T10 PI is negotiated, vhost-scsi splits protection bytes from the data iterator before mapping the request scatterlists. A malformed request can claim protection bytes that cover or exceed the full payload length. The former leaves no data bytes to map, while the latter underflows exp_data_len before advancing the iterator. Both cases can let a zero data SGL count reach sg_alloc_table_chained(), which triggers BUG_ON(!nents). Reject protection lengths that cover or exceed the payload before subtracting prot_bytes and advancing the iterator. Also propagate negative errors from the protection SGL calculation before calling the allocator, matching the data SGL path.

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward.

In the Linux kernel, the following vulnerability has been resolved: net/openvswitch: check Ethernet header length in key_extract() When a packet arrives on an ARPHRD_NONE device (e.g. TUN), ovs_flow_key_extract() trusts the user-provided skb->protocol field: if it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes for MAC addresses and parse_ethertype() pulls 2 more, either of which triggers a kernel BUG in __skb_pull() when the linear area is too small. kernel BUG at include/linux/skbuff.h:2848! RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933 ovs_flow_key_extract+0x419/0xa70 ovs_vport_receive+0x222/0x390 netdev_frame_hook+0x3e0/0x630 tun_get_user+0x2d0c/0x38e0 Fixed by calling check_header() in key_extract() before accessing the Ethernet header.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers Another challenge with unlocked filters. There is a short window in tc_new_tfilter where a tcf_proto can be found and briefly referenced by a totally unrelated, unlocked classifier's request and cause a race. Feng created a poc which created this race with two threads, one creating a u32 filter and other a flower filter in the same chain/prio: 1. Both threads enter tc_new_tfilter, both find the chain empty, both drop filter_chain_lock 2. u32 finishes tcf_proto_create("u32") first, calls tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain 3. flower finishes tcf_proto_create("flower") later, calls tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp already there, takes a reference on it, destroys flower's own tp_new and returns u32_tp to the caller. Flower then hits the kind mismatch check (because it requested for kind "flower" but tp->ops->kind is "u32") and goes through the errout path which calls tcf_proto_put() on u32_tp. If the u32 thread has already gone through its own errout (its change() call failed on the PoC's empty options) and dropped its create and insert refs, flower's put is the last one and drops u32_tp's refcnt to zero. At this point tp->ops->destroy() runs in a context that never took rtnl_lock. When that happens, it might cause a UAF like the following (illustrated by the PoC): [ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393) [ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524 Call Trace: u32_init (net/sched/cls_u32.c:393) tc_new_tfilter (net/sched/cls_api.c:2378) Allocated by task 526: u32_init (net/sched/cls_u32.c:378) tc_new_tfilter (net/sched/cls_api.c:2378) Freed by task 522: kfree u32_destroy (net/sched/cls_u32.c:662) tcf_proto_destroy (net/sched/cls_api.c:446) tcf_proto_put (net/sched/cls_api.c:459) tc_new_tfilter (net/sched/cls_api.c:2459) Fix this by having tcf_proto_destroy() take rtnl_lock around tp->ops->destroy() for locked classifiers whenever rtnl is not held. To explain why I used a temp variable "not_lockless" I'd like to point to a semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here for future cleanup if deemed necessary): The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are redundant sources of truth for whether rtnl_lock is held. Among the nine classifier destroy(..rtnl_held..) callbacks, only flower consults the rtnl_held parameter which it propagates to tc_setup_cb_destroy() and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic, fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy() (u32, bpf, mall) hardcode true always instead of forwarding the parameter. A future cleanup should remove the rtnl_held parameter from the destroy callback signature entirely and have callers rely solely on their knowledge whether they are running in an unlocked context.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in exec_queue_set_hang_replay_state() The q->replay_state is blindly overwritten, which can potentially leak memory that was previously allocated by vmemdup_user(). Return an error if q->replay_state is not empty. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e)

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix BQL reset on SQ re-activation mlx5e_queue_start() deactivates and re-activates all channels but closes only the queue being restarted. mlx5e_activate_txqsq() then unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters of channels that kept their in-flight TX WQEs. The next completion then over-charges and trips the BUG_ON() in dql_completed(): kernel BUG at lib/dynamic_queue_limits.c:99! RIP: 0010:dql_completed+0x23d/0x280 Call Trace: <IRQ> mlx5e_poll_tx_cq+0x668/0xa60 mlx5e_napi_poll+0x5b/0x7b0 net_rx_action+0x15a/0x580 Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc). In the case that reset is skipped, the outstanding WQEs will eventually complete and rebalance the dql. The dql->limit is carried across the reset.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix TFO max_qlen accounting across reuseport migration A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through far more pending Fast Open requests than it was configured for. This only shows up with SO_REUSEPORT listener migration, where closing a listener hands its still-pending TFO children over to a surviving one. fastopenq.qlen is charged in tcp_fastopen_create_child() when the child is created and uncharged in reqsk_fastopen_remove() when the handshake completes. The uncharge follows rsk_listener of the request the child points at, and inet_reqsk_clone() has repointed the child at a new request owned by the new listener, so the ++ and the -- land on two different sockets. The new listener's qlen drifts negative and its limit no longer binds. Charge the new listener during migration, like reqsk_queue_migrated() already does for queue->young and queue->qlen.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination.

In the Linux kernel, the following vulnerability has been resolved: net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length ncsi_send_cmd_nl() takes the number of bytes to copy from the attacker-controlled ncsi_pkt_hdr.length field of the in-band packet header, while the source buffer is the NCSI_ATTR_DATA netlink attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr). The two length sources are never cross-checked: only nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced. With hdr->length set larger than the attribute payload (up to 65535 against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies past the end of the netlink attribute buffer with unsafe_memcpy(), leaking up to ~64KB of kernel heap memory into the transmitted NCSI command packet. The destination skb is sized by the declared payload, so the write side does not overflow - this is a pure OOB read / information leak, reachable with CAP_NET_ADMIN on systems with a registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where NET_NCSI=y is standard). Reject commands whose declared payload extends past the end of the data attribute. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab.

In the Linux kernel, the following vulnerability has been resolved: net: prestera: validate firmware header length prestera_fw_hdr_parse() reads the firmware header before checking that the firmware image contains that header. Reject images shorter than struct prestera_fw_header before decoding the magic and version fields.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix TOCTOU race between smc_listen_out() and listener close smc_listen_out() reads lsmc->sk.sk_state without the listener lock, then acquires lock_sock_nested() only after the check passes. This opens a window where smc_close_active() can transition the listener to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept queue, and release the lock, all between the lockless read and the delayed lock acquisition: smc_listen_work (smc_hs_wq) smc_close_active() ------------------------------- ------------------------- release_sock(child) if (sk_state == SMC_LISTEN) TRUE lock_sock(listener) sk_state = SMC_CLOSED smc_close_cleanup_listen() release_sock(listener) flush_work(tcp_listen_work) lock_sock_nested(listener) smc_accept_enqueue(listener, child) /* child enqueued on dead listener */ smc_close_active() flushes only tcp_listen_work. Work items already dispatched onto smc_hs_wq for the CLC handshake continue running unguarded. smc_accept_enqueue() takes a sock_hold() on the child that is never released, so the child smc_sock, its clcsock, and the reference all leak. A remote peer that opens TCP connections while the server calls close() can exhaust kernel memory. Move lock_sock_nested() to before the sk_state check so that the test and the enqueue are atomic under the listener lock.

In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Tear down DMA paths before stopping the rings tbnet_tear_down() stops both rings and frees their frame buffers before calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's descriptor base and tbnet_free_buffers() unmaps and frees the pages the frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's 'pending' bit, anything still in flight has nowhere to drain to. The teardown sequence has been in this order since the driver was added. The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable DMA paths only after rings are enabled") moved the path enable to the end of tbnet_connected_work() and documented why: /* Both logins successful so enable the rings, high-speed DMA * paths and start the network device queue. * * Note we enable the DMA paths last to make sure we have primed * the Rx ring before any incoming packets are allowed to * arrive. */ Teardown was never updated to match, so the rings and the paths now come down in the same order they go up instead of in reverse. On an ASMedia ASM4242 host router the 'pending' bit then never clears: every teardown burns the full 500 ms timeout and __tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to 5 s does not help, so the hop is not slow to drain, it never drains at all. The failure is invisible above the thunderbolt core. __tb_path_deactivate_hops() is void and only calls tb_port_warn(); tb_path_deactivate(), tb_tunnel_deactivate() and __tb_disconnect_xdomain_paths() are void as well, and tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So tb_xdomain_disable_paths() reports success and the netdev_warn() below it never fires. Repeated teardowns eventually take the XDomain control channel down, after which the peer node is gone and only a power cycle brings the controller back. Deactivating the paths first fixes it. Measured with kretprobes on a stock v6.17 tree with no other patches applied, on a link that was up and had just carried traffic: before: __tb_path_deactivate_hop() returns 0 for the first hop, then -ETIMEDOUT for the second 500335 us later after: 0 for both, 525 us apart Alternating the two orderings ABBA over three load levels, four teardowns per arm: every teardown failed before the change (21 of 21 that ran), none failed after (0 of 24). The before arms ran short because the link died partway through. The same split shows up when the interface is enslaved to a bond instead of just brought down, which is how I ran into this in the first place. Throughput and latency after the change are unchanged. Hosts whose routers drain the hop despite the stale descriptor base see no functional difference, since the paths end up deactivated either way.

In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures.

In the Linux kernel, the following vulnerability has been resolved: net/atm: fix slab-out-of-bounds read in vcc_setsockopt() vcc_setsockopt() contained an ineffective optlen check: if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname)) return -EINVAL; If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller passed a mismatched level), the length check optlen != __SO_SIZE(optname) was short-circuited and bypassed. Execution then fell through to switch(optname), calling copy_from_sockptr() assuming optval contained sufficient space. Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(), this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the expected structure size. Fix this by using copy_safe_from_sockptr(), which unconditionally validates that optlen is at least the expected size before copying. Also change the local 'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches its sizeof(int) ABI encoding on 64-bit systems.

In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport.

In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer.

In the Linux kernel, the following vulnerability has been resolved: rqspinlock: Reset tail when preserving queue on deadlock Currently, the destruction of the waiter queue is suppressed for rqspinlock in cases where a deadlock is detected. Deadlock checks happen relatively frequently (on entry for AA, within 1ms for ABBA), and waiter threads may not be involved in locking scenarios involving deadlocks. Thus, it is useful to not flush the queue and let other waiters take a stab at acquiring the lock after we detect a deadlock and exit. However, we need to follow the same logic as what we did previously for the waitq_timeout label: reset the tail, and if we cannot, signal the next waiter appropriately. In case of deadlocks, this signal would just mark the MCS node as unlocked, and in case of timeouts, it would signal RES_TIMEOUT_VAL. The difference thus is in the value propagated, which decides whether the queue remains active or gets flushed. Not doing the tail reset, and waiting for the next waiter can lead to cases where we are the final waiter, and thus no next waiter arrives, leading to intermittent stalls in this path. Once the next waiter does join, we will be unblocked. In the theoretical case when the next waiter never joins, we risk stalling indefinitely. This can only happen for ABBA deadlocks, since entry into the wait queue is guarded with AA checks. A precise sequence of executions leading up to this scenario can be: CPU 0 holds lock A. CPU 1 holds lock B. CPU 2 attempts lock B, becomes the pending waiter for B. CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues. CPU 1 attempts lock A. CPU 0 detects an ABBA deadlock. Once deadlock detection happens for CPU 0, it will sit waiting for the next waiter in the queue to populate node->next, which will experience delays until such a waiter arrives. Fix this by adjusting the logic for the check for deadlocks preceding the waitq_timeout label. It would make sense to consolidate code for both cases and use 'ret' to distinguish the value being propagated, but that is left as an exercise for a future refactoring task to avoid diff noise in this patch.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Clamp negative current limits When a negative value is passed to ltc4282_write_curr(), the signed long val is cast directly to u64: drivers/hwmon/ltc4282.c:ltc4282_write_curr() { /* need to pass it in millivolt */ u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO); ... } This cast converts negative inputs into large positive values. The subsequent division result overflows the u32 in variable, truncating to a pseudo-random positive value. When this is passed to ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead of zero. Clamp val to 0 and to the maximum supported upper limit before the cast and assign the result to a 64-bit temporary variable before the division to avoid the underflow and an also possible overflow.

In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit().

In the Linux kernel, the following vulnerability has been resolved: Input: evdev - sanitize event type index when fetching event masks The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK ioctls is used to index the static counts array in evdev_get_mask_cnt() and client evmasks array in evdev_get_mask(). While the event type is architecturally bounded by EV_CNT, speculative execution may mispredict bounds checks and perform out-of-bounds loads. Sanitize the event type index in evdev_get_mask_cnt() branchlessly using array_index_mask_nospec(). This clamps the index to 0 for safe array access and forces the returned count to 0 speculatively when the index is out of bounds. We do not need additional array_index_nospec() calls in evdev_get_mask() because evdev_get_mask_cnt() speculatively forces the count (and resulting xfer_size) to 0 for out-of-bounds types, preventing any speculative memory access to client evmasks array.