CVE Database

In the Linux kernel, the following vulnerability has been resolved: spi: s3c64xx: fix NULL-deref on driver unbind A change moving DMA channel allocation from probe() back to s3c64xx_spi_prepare_transfer() failed to remove the corresponding deallocation from remove(). Drop the bogus DMA channel release from remove() to avoid triggering a NULL-pointer dereference on driver unbind. This issue was flagged by Sashiko when reviewing a controller deregistration fix.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty Fall back to apic_find_highest_vector() when PID.ON is set but PIR turns out to be empty, to correctly report the highest pending interrupt from the existing IRR. In a nested VM stress test, the following WARNING fires in vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending interrupt but the subsequent kvm_apic_has_interrupt() (which invokes vmx_sync_pir_to_irr() again) returns -1: WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel] Call Trace: kvm_check_and_inject_events vcpu_enter_guest.constprop.0 vcpu_run kvm_arch_vcpu_ioctl_run kvm_vcpu_ioctl __x64_sys_ioctl do_syscall_64 entry_SYSCALL_64_after_hwframe The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender performs two individually-atomic operations that are not a single transaction: 1. pi_test_and_set_pir(vector) -- sets the PIR bit 2. pi_test_and_set_on() -- sets PID.ON The following interleaving triggers the bug: Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr): B1: set PIR[vector] A1: pi_clear_on() A2: pi_harvest_pir() -> sees B1 bit A3: xchg() -> consumes bit, PIR=0 (1st sync returns correct max_irr) B2: set PID.ON = 1 Target vCPU (2nd sync_pir_to_irr): C1: pi_test_on() -> TRUE (from B2) C2: pi_clear_on() -> ON=0 C3: pi_harvest_pir() -> PIR empty C4: *max_irr = -1, early return IRR NOT SCANNED The interrupt is not lost (it resides in the IRR from the first sync and is recovered on the next vcpu_enter_guest() iteration), but the incorrect max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: core: Fix detach procedure for virtual devices in genpd If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(), genpd calls pm_runtime_enable() for the corresponding virtual device that it registers. While this avoids boilerplate code in drivers, there is no corresponding call to pm_runtime_disable() in genpd_dev_pm_detach(). This means these virtual devices are typically detached from its genpd, while runtime PM remains enabled for them, which is not how things are designed to work. In worst cases it may lead to critical errors, like a NULL pointer dereference bug in genpd_runtime_suspend(), which was recently reported. For another case, we may end up keeping an unnecessary vote for a performance state for the device. To fix these problems, let's add this missing call to pm_runtime_disable() in genpd_dev_pm_detach().

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - guard HMAC key hex dumps in hash_digest_key Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in hash_digest_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled.

In the Linux kernel, the following vulnerability has been resolved: x86/efi: Fix graceful fault handling after FPU softirq changes Since commit d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin() calls fpregs_lock() which uses local_bh_disable() instead of the previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count during the entire EFI runtime service call, causing in_interrupt() to return true in normal task context. The graceful page fault handler efi_crash_gracefully_on_page_fault() uses in_interrupt() to bail out for faults in real interrupt context. With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI firmware page faults unhandled. This escalates to die() which also sees in_interrupt() as true and calls panic("Fatal exception in interrupt"), resulting in a hard system freeze. On systems with buggy firmware that triggers page faults during EFI runtime calls (e.g., accessing unmapped memory in GetTime()), this causes an unrecoverable hang instead of the expected graceful EFI_ABORTED recovery. Fix by replacing in_interrupt() with !in_task(). This preserves the original intent of bailing for interrupts or NMI faults, while no longer falsely triggering from the FPU code path's local_bh_disable(). [ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a window where a softirq may be taken before fpregs_lock() is called, but after efi_rts_work.efi_rts_id has been assigned, and any page faults occurring in that window will then be misidentified as having been caused by the firmware. Instead, use !in_task(), which incorporates in_serving_softirq(). ]

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix RTNL assertion warning when remove module For the copper NIC with external PHY, the driver called phylink_connect_phy() during probe and phylink_disconnect_phy() during remove. It caused an RTNL assertion warning in phylink_disconnect_phy() upon module remove. To fix this, add rtnl_lock() and rtnl_unlock() around the phylink_disconnect_phy() in remove function. ------------[ cut here ]------------ RTNL: assertion failed at drivers/net/phy/phylink.c (2351) WARNING: drivers/net/phy/phylink.c:2351 at phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464 Modules linked in: ... CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+ Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7 48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000 RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020 RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000 R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348 FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> txgbe_remove_phy+0xbb/0xd0 [txgbe] txgbe_remove+0x4c/0xb0 [txgbe] pci_device_remove+0x41/0xb0 device_remove+0x43/0x80 device_release_driver_internal+0x206/0x270 driver_detach+0x4a/0xa0 bus_remove_driver+0x83/0x120 driver_unregister+0x2f/0x60 pci_unregister_driver+0x40/0x90 txgbe_driver_exit+0x10/0x850 [txgbe] __do_sys_delete_module.isra.0+0x1c3/0x2f0 __x64_sys_delete_module+0x12/0x20 x64_sys_call+0x20c3/0x2390 do_syscall_64+0x11c/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x15a/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_fault+0x312/0x580 ? srso_alias_return_thunk+0x5/0xfbef5 ? __handle_mm_fault+0x9d5/0x1040 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events+0x101/0x1d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1e8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x2f8/0x820 ? srso_alias_return_thunk+0x5/0xfbef5 ? irqentry_exit+0xb2/0x600 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: leds: qcom-lpg: Check for array overflow when selecting the high resolution When selecting the high resolution values from the array, FIELD_GET() is used to pull from a 3 bit register, yet the array being indexed has only 5 values in it. Odds are the hardware is sane, but just to be safe, properly check before just overflowing and reading random data and then setting up chip values based on that.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix early boot crash on parameters without '=' separator If hugepages, hugepagesz, or default_hugepagesz are specified on the kernel command line without the '=' separator, early parameter parsing passes NULL to hugetlb_add_param(), which dereferences it in strlen() and can crash the system during early boot. Reject NULL values in hugetlb_add_param() and return -EINVAL instead.

In the Linux kernel, the following vulnerability has been resolved: tpm: Use kfree_sensitive() to free auth session in tpm_dev_release() tpm_dev_release() uses plain kfree() to free chip->auth, which contains sensitive cryptographic material including HMAC session keys, nonces, and passphrase data (struct tpm2_auth). Every other code path that frees this structure uses kfree_sensitive() to zero the memory before releasing it: both tpm2_end_auth_session() and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path is the only one that does not, leaving key material in freed slab memory until it is eventually overwritten. Use kfree_sensitive() for consistency with the rest of the driver and to ensure session keys are scrubbed during device teardown.

In the Linux kernel, the following vulnerability has been resolved: iio: frequency: admv1013: fix NULL pointer dereference on str When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver. Several cleanup patches have been applied to this driver recently so this will need a manual backport.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix segfault when updating ftrace mask Fix invalid data access by passing right data for debugfs entry. [ 171.549793] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 171.559248] Mem abort info: [ 171.562173] ESR = 0x0000000096000044 [ 171.566227] EC = 0x25: DABT (current EL), IL = 32 bits [ 171.573108] SET = 0, FnV = 0 [ 171.576448] EA = 0, S1PTW = 0 [ 171.579745] FSC = 0x04: level 0 translation fault [ 171.584760] Data abort info: [ 171.588012] ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000 [ 171.593734] CM = 0, WnR = 1, TnD = 0, TagAccess = 0 [ 171.598962] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 171.604471] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000083837000 [ 171.611358] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 171.618500] Internal error: Oops: 0000000096000044 [#1] SMP [ 171.624222] Modules linked in: powervr drm_shmem_helper drm_gpuvm... [ 171.656580] CPU: 0 UID: 0 PID: 549 Comm: bash Not tainted 7.0.0-rc2-g730b257ba723-dirty #13 PREEMPT [ 171.665773] Hardware name: BeagleBoard.org BeaglePlay (DT) [ 171.671296] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 171.678306] pc : pvr_fw_trace_mask_set+0x78/0x154 [powervr] [ 171.683959] lr : pvr_fw_trace_mask_set+0x4c/0x154 [powervr] [ 171.689593] sp : ffff8000835ebb90 [ 171.692929] x29: ffff8000835ebc00 x28: ffff000005c60f80 x27: 0000000000000000 [ 171.700130] x26: 0000000000000000 x25: ffff00000504af28 x24: 0000000000000000 [ 171.707324] x23: ffff00000504af50 x22: 0000000000000203 x21: 0000000000000000 [ 171.714518] x20: ffff000005c44a80 x19: ffff000005c457b8 x18: 0000000000000000 [ 171.721715] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaae8887580 [ 171.728908] x14: 0000000000000000 x13: 0000000000000000 x12: ffff8000835ebc30 [ 171.736095] x11: ffff00000504af2a x10: ffff00008504af29 x9 : 0fffffffffffffff [ 171.743286] x8 : ffff8000835ebbf8 x7 : 0000000000000000 x6 : 000000000000002a [ 171.750479] x5 : ffff00000504af2e x4 : 0000000000000000 x3 : 0000000000000010 [ 171.757674] x2 : 0000000000000203 x1 : 0000000000000000 x0 : ffff8000835ebba0 [ 171.764871] Call trace: [ 171.767342] pvr_fw_trace_mask_set+0x78/0x154 [powervr] (P) [ 171.772984] simple_attr_write_xsigned.isra.0+0xe0/0x19c [ 171.778341] simple_attr_write+0x18/0x24 [ 171.782296] debugfs_attr_write+0x50/0x98 [ 171.786341] full_proxy_write+0x6c/0xa8 [ 171.790208] vfs_write+0xd4/0x350 [ 171.793561] ksys_write+0x70/0x108 [ 171.796995] __arm64_sys_write+0x1c/0x28 [ 171.800952] invoke_syscall+0x48/0x10c [ 171.804740] el0_svc_common.constprop.0+0x40/0xe0 [ 171.809487] do_el0_svc+0x1c/0x28 [ 171.812834] el0_svc+0x34/0x108 [ 171.816013] el0t_64_sync_handler+0xa0/0xe4 [ 171.820237] el0t_64_sync+0x198/0x19c [ 171.823939] Code: 32000262 b90ac293 1a931056 9134e293 (b9000036) [ 171.830073] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix zero-size GDS range init on RDNA4 RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory resources. The gfx_v12_0 initialisation code correctly leaves adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at zero to reflect this. amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for each of these resources regardless of size. When the size is zero, amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(), which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT. Guard against this by returning 0 early from amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM resource manager registration for hardware resources that are absent, without affecting any other GPU type. DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in the kernel config. This is apparently rarely enabled as these chips have been in the market for over a year and this issue was only reported now. Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html (cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)

fabric-chaincode-java is a Java based implementation of Hyperledger Fabric chaincode shim APIs. From version 2.3.1 to before version 2.5.10, when chaincode is deployed in chaincode-as-a-service mode with TLS enabled, the chaincode server INFO level logging includes the TLS private key password in plaintext. An attacker with access to the chaincode server logs could recover the TLS private key password. If the attacker can also obtain the TLS private key, they could impersonate the chaincode server. This issue has been patched in version 2.5.10.

OpenBullet2 through version 0.3.2 on Windows contains a credential disclosure vulnerability that allows remote attackers to capture the NTLMv2 hash of the process user by configuring a job proxy source with a UNC path pointing to an attacker-controlled server. When the job starts, the application attempts to load proxies from the UNC path, triggering an SMB authentication attempt that discloses the NTLMv2 hash, which can then be relayed or cracked offline.

A flaw was found in 389 Directory Server. The Content Synchronization persistent search plugin allows unbounded memory growth when an authenticated client stops reading sync responses, enabling denial of service. Additional race conditions in plugin thread lifecycle can cause crashes during connection teardown or shutdown.

A security vulnerability has been detected in imvks786 student_management_system up to 9599b560ad3c3b83e75d328b76bedcd489ef1f46. Affected by this vulnerability is an unknown functionality of the file /see.php of the component Student Deletion Endpoint. The manipulation of the argument del leads to improper authorization. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

A weakness has been identified in imvks786 student_management_system up to 9599b560ad3c3b83e75d328b76bedcd489ef1f46. Affected is an unknown function of the file /add.php of the component Student Record Handler. Executing a manipulation can lead to improper access controls. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet.

Flowise is a drag & drop user interface to build a customized large language model flow. Prior to version 3.1.2, when credentials are fetched with a credentialName filter parameter, the encryptedData field is not stripped from the response. The code properly omits encryptedData when no filter is used but fails to do so when a filter is used. This issue has been patched in version 3.1.2.

Improper Privilege Management vulnerability in Apache HTTP Server 2.4.67 and earlier allows local .htaccess authors to read files with the privileges of the httpd user. This issue affects Apache HTTP Server: from through 2.4.67. Users are recommended to upgrade to version 2.4.68, which fixes the issue.

Out-of-bounds Read vulnerability in Apache HTTP Server with mod_headers and mod_mime and multiple response languages. This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.

Flowise is a drag & drop user interface to build a customized large language model flow. Prior to version 3.1.2, a mass assignment vulnerability exists in the tool update endpoint of FlowiseAI. The endpoint allows authenticated users to modify server-controlled properties such as workspaceId, createdDate, and updatedDate when updating a tool resource. Due to missing server-side validation and authorization checks, an attacker can manipulate the workspaceId field and reassign tools to arbitrary workspaces. This breaks tenant isolation in multi-workspace environments. This issue has been patched in version 3.1.2.

A cross-site scripting vulnerability exists in mod_proxy_ftp's HTML directory list generation in Apache HTTP Server 2.4.67 and earlier when listing FTP directory contents either via forward or reverse proxy configuration. Users are recommended to upgrade to version 2.4.68, which fixes this issue.

A vulnerability was determined in designcomputer mysql-mcp-server up to 0.2.2. The impacted element is the function read_resource of the file src/mysql_mcp_server/server.py of the component mysql URI Handler. This manipulation of the argument uri_str causes sql injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.3.0 is sufficient to resolve this issue. Patch name: 080bef9a96d625ce0dfbde573a08b93497871981. Upgrading the affected component is advised.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Convert to DRM's vblank timer Replace vkms' vblank timer with the DRM implementation. The DRM code is identical in concept, but differs in implementation. Vblank timers are covered in vblank helpers and initializer macros, so remove the corresponding hrtimer in struct vkms_output. The vblank timer calls vkms' custom timeout code via handle_vblank_timeout in struct drm_crtc_helper_funcs.

OfflineIMAP before 8.0.3 trusts the server with their STARTTLS capability prior to authentication, which allows STRIPTLS/man-in-the-middle attacks, taking over the connection and extracting account credentials in cleartext.

QloApps through 1.7.0 contains a stored cross-site scripting vulnerability in the admin file manager that allows authenticated administrators to inject malicious JavaScript by uploading crafted SVG files. Attackers can embed JavaScript event handlers such as onload within SVG files uploaded through the file manager to execute arbitrary scripts in the browser of any user who subsequently views the file.

A security vulnerability has been detected in Mohammed-eid35 bank-management-system-springboot up to 7b9bcc65ad7df3db29af71aed9bb500e5f24d948. This affects an unknown part of the file src/main/java/com/alien/bank/management/system/controller/TransactionController.java of the component Transaction Endpoint. Such manipulation leads to improper authorization. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet.

A security flaw has been discovered in SourceCodester Inventory System 1.0. Affected by this vulnerability is an unknown functionality of the file /Product_Inventory/api/users_handler.php of the component Account Creation Handler. The manipulation of the argument ROLE results in improper authorization. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in SourceCodester Inventory System 1.0. Affected is an unknown function of the file /users.php of the component User Management Page. The manipulation of the argument fullname/username leads to cross site scripting. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability was found in UTT HiPER 2610G up to 3.0.0-171107. This affects the function strcpy of the file /goform/formNatStaticMap. Performing a manipulation of the argument NatBinds results in buffer overflow. The exploit has been made public and could be used.