CVE Database

In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word.

In the Linux kernel, the following vulnerability has been resolved: ovpn: defer key slot crypto freeing to workqueue Key slots are released through a kref and the existing release path frees the AEAD transforms from an RCU callback. That is not safe for all crypto implementations: crypto_free_aead can sleep, for example when an async or hardware implementation has teardown work to complete. Use queue_rcu_work for key-slot release. This keeps the RCU grace period needed by lockless key-slot readers, but runs the actual crypto teardown from workqueue context where sleeping is allowed. Once the rcu_work callback runs, pre-existing RCU readers are gone, and the final kref put already proves that no transform user remains, so the worker can release the AEAD transforms and free the slot directly. The previous patch drains ovpn_wq during module exit, so queued key-slot teardown work cannot outlive module text.

In the Linux kernel, the following vulnerability has been resolved: rseq: Prevent hard lockup on granted time slice extension __exit_to_user_mode_loop() invokes rseq_grant_timeslice_extension() with interrupts enabled. If the extension is granted it invokes hrtimer_rearm_deferred_tif() to ensure that a pending deferred hrtimer rearm is handled before exiting to user space. Though this invokes __hrtimer_rearm_deferred() which expects to be invoked with interrupts disabled as it takes hrtimer_cpu_base::lock with raw_spin_lock(). That's a livelock waiting to happen and caught by lockdep: WARNING: ./include/linux/hrtimer_rearm.h:17 at irqentry_exit, CPU#1: slice_test WARNING: inconsistent lock state inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. Prevent this by disabling interrupts around the invocation of hrtimer_rearm_deferred_tif() in rseq_grant_timeslice_extension(). [ tglx: Massaged change log ]

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix refcount race between list:set GC and swap __ip_set_put_byindex() resolved the index to a set pointer under RCU, then took ip_set_ref_lock in __ip_set_put() to decrement set->ref. ip_set_swap() holds that same lock while swapping both the ip_set_list slots and the two sets' ref counters, so it can interleave between the dereference and the lock acquisition, leaving the caller to decrement a set whose reference already moved to the other index and hit BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq, which the nfnl mutex does not serialize against swap: an expiring list:set member calls list_set_del() -> ip_set_put_byindex() while IPSET_CMD_SWAP runs on the referenced sets. Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap() already does, keeping the refcount tied to the index rather than to a stale set pointer. kernel BUG at net/netfilter/ipset/ip_set_core.c:685! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870) Call Trace: <IRQ> list_set_del (net/netfilter/ipset/ip_set_list_set.c:159) set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181) list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578) call_timer_fn (kernel/time/timer.c:1748) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374) run_timer_softirq (kernel/time/timer.c:2405) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: ipvs: revalidate ihl to prevent out-of-bounds access While the outer IP header is already pulled into the skb head, we must be careful and revalidate the embedded headers after reading them from the skb frags to prevent out-of-bounds access. One such place reported by Sashiko is ip_vs_nat_icmp() where local process can change the ihl field and after skb_ensure_writable() we can see larger value which is a problem for the ip_send_check(cih) calls. Add check to drop the packet if the ihl field is changed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish GC-visible tuple last nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.).

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: avoid deadlock when canceling IRQ affinity notifier Unregistering IRQ affinity notifiers waits for the callback synchronously. bnxt takes the netdev instance lock in the notifier (to restart the queue) and cancels the work under the same lock. This may obviously deadlock. Move the restart to the async service task. The queue restart isn't super time sensitive. Store the new TPH tag, schedule the task. Safely canceling the service task is already ironed out. In bnxt_request_irq() the order of registering notifier, affinity and initial TPH programming has to be inverted. I think it was racy previously since user may trigger an update as soon as notifier is installed. There's a small known gap - if pcie_tph_get_cpu_st() fails at init and the target tag is 0 we may miss programming the entry. This does not seem worth fixing, the code has skip-on-failure all over the place, anyway.

In the Linux kernel, the following vulnerability has been resolved: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

In the Linux kernel, the following vulnerability has been resolved: macvlan: inherit needed_headroom and needed_tailroom from lowerdev macvlan devices inherit hard_header_len from lowerdev during macvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying lowerdev requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached macvlans in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

In the Linux kernel, the following vulnerability has been resolved: veth: fix queue index used to wake the peer txq in veth_poll veth_poll() derives the index of the peer TX queue to wake from rq->xdp_rxq.queue_index. That field is only initialized by xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an XDP program is attached. On the plain GRO/NAPI path (veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so queue_index stays 0 for every queue, as priv->rq is zero-allocated. So in a multi-queue setup with GRO enabled and no XDP program attached, every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing ever wakes it again: the poller draining queue 1 wakes queue 0 instead. veth implements no ndo_tx_timeout, so the netdev watchdog does not kick in either, and the queue stays stopped indefinitely. Derive the index from the position of the rq within priv->rq instead, which is correct regardless of whether XDP was ever enabled. Scripts to reproduce the stall are available at https://github.com/netoptimizer/veth-backpressure-performance-testing

In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences wx->msix_entry->entry, leading to a NULL pointer dereference crash. This issue was introduced by fixing the IRQ vector when the number of VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to determine the correct vector index. Additionally, as a side fix, set the interrupt mask to BIT(0) for the non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts share vector 0, and the WX_PX_MISC_IVAR register is only valid in the MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause when MSI-X is disabled.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking rcu_access_pointer(a->goto_chain) and then calling tcf_action_goto_chain_exec(), which does a second, independent rcu_dereference_bh(a->goto_chain) read and immediately dereferences chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact replace path) can clear a->goto_chain between the two reads, so the second read returns NULL and tcf_action_goto_chain_exec() dereferences NULL. Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain in tcf_action_exec(), checking it once for NULL, and passing the resulting chain pointer into tcf_action_goto_chain_exec(). This turns the split check/use into a single check/use on one value.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check.

In the Linux kernel, the following vulnerability has been resolved: regmap: sdw-mbq: don't call an unset readable_reg callback regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit by calling ctx->readable_reg(), which is a straight copy of config->readable_reg. That callback is optional: regmap_readable() treats a NULL ->readable_reg as "every register is readable", and drivers rely on that. es9356 and tac5xx2-sdw both build an MBQ regmap without one. Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable controls") the poll runs on every -ENODATA, not only for Controls the driver marked deferrable, so any of those devices answering COMMAND_IGNORED takes the kernel through a NULL function pointer. Treat a missing callback the way the rest of regmap does and poll.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG On the packet reception path, the ID of the MAC Port on which the packet was received, is embedded in the RX DMA Descriptor's metadata. The ID is extracted using the helper function cppi5_desc_get_tags_ids() which fills in the 16-bit Source Tag into the 'port_id' variable. However, it is only the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID, while the upper 8-bits are Hardware-Reserved and carry an arbitrary value. With the existing logic, sporadic kernel crash is observed due to the subsequent driver code accessing out-of-bound memory because of an invalid port_id. Hence, fix the port_id extraction logic to use only the lower 8-bits of the Source Tag as the MAC Port ID.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: reject dev-bound programs bound to a different device cls_bpf_prog_from_efd() obtained a SCHED_CLS program via bpf_prog_get_type_dev() but never verified that a device-bound (offloaded) program's bound netdev matches the TC netdev the classifier is being attached to. This let a program loaded with prog_ifindex for device A be attached via cls_bpf + skip_sw to device B; deleting device A then destroyed the program's offload state while it was still attached to device B, triggering a netdevsim WARN (panic with panic_on_warn=1). Mirror the XDP attach path (net/core/dev.c) and reject the attach with -EINVAL when a dev-bound program's bound device does not match the target device.

In the Linux kernel, the following vulnerability has been resolved: l2tp: fix tunnel and session refcount leak on seq_file release In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state (pd->tunnel and pd->session) is kept in seq_file private data to allow iteration across multiple read() system calls. However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels before reading to end-of-file (EOF), any tunnel or session reference stored in pd->tunnel / pd->session is left un-dropped when seq_file private data is freed. Fix this by dropping any remaining pd->tunnel and pd->session references in pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file.

In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: fix NULL pointer dereference in ar_context_release During the error handling path of the driver's probe function, a NULL pointer dereference can occur in ar_context_release(). When pci_probe() fails early (e.g., if pcim_enable_device() or MMIO mapping fails), the devres cleanup mechanism invokes release_ohci(). This function unconditionally calls ar_context_release() to clean up the asynchronous receive contexts. However, if ar_context_init() was not yet called, ctx->ohci remains NULL (as the fw_ohci structure is zero-initialized by devres_alloc()). ar_context_release() immediately dereferences ctx->ohci to get the dev pointer before checking if the context was actually initialized, leading to a crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:ar_context_release+0x3f/0x380 drivers/firewire/ohci.c:543 Call Trace: release_ohci+0x3f/0x60 drivers/firewire/ohci.c:3567 release_nodes drivers/base/devres.c:546 [inline] devres_release_all+0x1a8/0x260 drivers/base/devres.c:576 device_unbind_cleanup drivers/base/dd.c:597 [inline] really_probe+0x451/0xae0 drivers/base/dd.c:772 To fix this, move the assignment of the dev pointer after the !ctx->buffer check. If ctx->buffer is NULL, it indicates that the context was never successfully initialized and there is nothing to release, safely avoiding the dereference of the uninitialized ctx->ohci pointer.

Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, an unauthenticated HTTP/2 peer can cause an out-of-memory denial of service in the Ember backend with HTTP/2 enabled. The Hpack wrapper in ember-core/shared/src/main/scala/org/http4s/ember/core/h2/Hpack.scala concatenates HEADERS and CONTINUATION frame fragments and decodes them into a single List, but maxHeaderSize accounting does not include indexed headers or HPACK per-header overhead. A small compressed header block can therefore expand into a much larger decoded representation that remains in memory for processing. Servers exposed to untrusted HTTP/2 traffic and clients directed to an untrusted HTTP/2 server are affected, and concurrent malicious connections can exhaust the process heap. This issue is fixed in versions 0.23.35 and 1.0.0-M47.

Starlette-Admin is a fast, beautiful and extensible administrative interface framework for FastAPI and Starlette applications. Prior to 0.16.1, the list API does not validate user-supplied order_by and structured where field names against the configured sortable_fields and searchable_fields allowlists. An authenticated user with access to an affected list endpoint can submit arbitrary field names to starlette_admin/base.py and the BaseModelView validation path, bypassing restrictions presented by the administrative user interface. Requests can sort or filter on fields that are not intended to be sortable or searchable, causing limited information exposure. Invalid field names and special Python attribute names such as metadata and the class dunder attribute can also trigger unhandled exceptions and HTTP 500 responses, causing limited denial of service for targeted requests. This issue is fixed in version 0.16.1.

IzPack is a widely used tool for packaging applications on the Java platform as cross-platform installers. In 5.2.6 and earlier, UnpackerBase.unpack() in izpack-installer/src/main/java/com/izforge/izpack/installer/unpacker/UnpackerBase.java obtains an attacker-controlled PackFile targetPath, passes it through IoHelper.translatePath(), which only converts separators, and constructs a File without normalizing parent-directory segments or enforcing destination containment. A malicious installer pack entry containing ../ sequences can therefore write outside the intended installation directory to startup folders, executable search paths, or other locations accessible with the victim's privileges when the victim runs the installer.

kas is a setup tool for bitbake based projects. Prior to 5.4, internal SSH key setup triggered by SSH_PRIVATE_KEY or SSH_PRIVATE_KEY_FILE creates ~/.ssh/config when no user-specific SSH configuration exists and adds a global Host * rule containing StrictHostKeyChecking no. In kas/libcmds.py, ssh_no_host_key_check() runs without checking ctx.managed_env, so the setting persists after kas exits and affects future SSH sessions by the same local user, extending beyond the intended short-lived continuous integration environment. A later SSH connection can therefore accept an attacker-controlled host key without verification, increasing the risk of a man-in-the-middle attack that compromises session confidentiality or integrity. This issue is fixed in version 5.4.

Kyverno is a policy engine designed for cloud native platform engineering teams. From 1.18.0 until 1.18.2, the NamespacedMutatingPolicy CEL compiler exposes the generator library to matchConditions, allowing a namespace-scoped policy to invoke generator.apply(namespace, resources) with an arbitrary target namespace. The validation in pkg/cel/policies/mpol/validate.go checks that the policy compiles but does not enforce namespace scope, and GenerateResources in pkg/cel/libs/context.go does not reject the cross-namespace target. A user who can create NamespacedMutatingPolicy objects in one namespace can cause the admission controller, operating with cluster-wide privileges, to create ConfigMaps, NetworkPolicies, Secrets, RoleBindings, and other resources in another namespace, enabling unauthorized modification and potential privilege escalation. This issue is fixed in version 1.18.2.

LogTape is an unobtrusive logging library. Prior to 1.3.11, 2.0.14, and 2.1.5, the @logtape/syslog package's escapeStructuredDataValue() function in packages/syslog/src/syslog.ts does not neutralize C0 control characters from U+0000 through U+001F in structured data values, and formatStructuredData() inserts property keys without validating the RFC 5424 SD-NAME grammar. When includeStructuredData is true, an attacker-controlled newline can terminate an RFC 6587 non-transparent TCP syslog frame and make following bytes appear as a forged RFC 5424 record, while a key containing a closing bracket or other forbidden character can terminate or corrupt the structured-data element. Applications that forward attacker-controlled property values or keys can therefore allow forged records with arbitrary hosts, applications, process identifiers, facilities, or severity levels, undermining downstream collector and SIEM integrity. This issue is fixed in versions 1.3.11, 2.0.14, and 2.1.5.

The IEEE 1588 PTP management-message parser in subsys/net/lib/ptp/tlv.c mishandles the PTP_MGMT_TIME management id. In tlv_mgmt_post_recv(), the PTP_MGMT_TIME case casts mgmt_tlv->data to a 10-byte struct ptp_timestamp and reads it (then byte-swaps and writes it back) without first checking that the TLV data field is at least sizeof(struct ptp_timestamp). Every sibling management id in the same switch validates its length first; PTP_MGMT_TIME was the only case lacking that check. The length passed in is the management data size (tlv->length - 2), and the upstream guard in ptp_tlv_post_recv() only requires tlv->length > 2, while msg_tlv_post_recv() validates only that the TLV fits within the received byte count, not a per-id minimum. A peer on the local PTP segment can therefore send a PTP_MSG_MANAGEMENT message carrying a short PTP_MGMT_TIME TLV (data as small as 2 bytes), causing the parser to read and write 8 bytes beyond the validated data. The message type and TLV contents are taken straight off the wire, so the path is reachable by any adjacent attacker when CONFIG_PTP is enabled. The over-read and write-back stay within the struct ptp_msg allocation (mgmt_tlv->data lives in the leading mtu[NET_ETH_MTU] union member, so data + 10 lands at most a few bytes past mtu[], inside the same object), so this is an out-of-bounds read of adjacent in-object memory plus a bounded in-place corruption of the message's parsed timestamp, not past-allocation memory corruption. Impact is limited to minor information exposure of adjacent bytes and corruption of the device's parsed management TIME value; there is no crash on the access and no reachable reference-count corruption. The fix adds if (length < sizeof(struct ptp_timestamp)) { return -EBADMSG; } before the cast, matching the other management-id cases and fully closing the receive-path defect.

The LoRaWAN TS004 Fragmented Data Block Transport handler frag_transport_package_callback() in subsys/lorawan/services/frag_transport.c parses downlink command bytes without validating that enough payload bytes remain before each access. The loop's only bound is rx_pos < len; after consuming the one-byte command id the handler cast rx_buf + rx_pos to a 10-byte struct frag_transport_setup_req, and for a DATA_FRAGMENT command passed &rx_buf[rx_pos] to the fragment decoder, which reads exactly ctx.frag_size bytes — with no remaining-length check in either case. The fragment size is attacker-chosen in a preceding FRAG_SESSION_SETUP command (ctx.frag_size = req->frag_size, capped at CONFIG_LORAWAN_FRAG_TRANSPORT_MAX_FRAG_SIZE, default 232). rx_buf aliases the 255-byte static MacCtx.RxPayload buffer in the loramac-node MAC layer, while len is the actual decrypted payload length. By padding a downlink with mismatched-index DATA_FRAGMENT filler commands (each advancing rx_pos by three bytes without producing an answer) and appending one matching-index fragment near the end of the payload, an attacker can make the decoder read up to roughly frag_size bytes past the end of RxPayload, copying adjacent static memory into the decoder buffers and the FUOTA flash image. The handler runs only on downlinks that have already passed the LoRaWAN frame MIC and FRMPayload decryption, so the defect is reachable only by a party holding the device's session keys (the FUOTA server or an attacker who has compromised those keys). The out-of-bounds bytes are never returned to the sender — the only uplink emitted is a status answer carrying fragment counts — so there is no direct disclosure channel, and on typical flat-memory LoRaWAN MCUs the over-read stays within mapped memory, making a crash unlikely. The impact is therefore a bounded out-of-bounds read with limited confidentiality consequence and no write or control-flow primitive. The fix adds remaining-length guards before each access.

The LoRaWAN application-layer clock-synchronization service parses downlinks in clock_sync_package_callback() (subsys/lorawan/services/clock_sync.c). Its command loop only guarantees that the one-byte command id is in bounds; for the CLOCK_SYNC_CMD_APP_TIME (AppTimeAns) command the handler then reads a 4-byte time correction via sys_get_le32() plus a 1-byte token without checking that 5 bytes remain in the receive buffer (len - rx_pos). A short or crafted AppTimeAns therefore reads up to 5 bytes past the end of the decrypted payload. The payload (rx_buf/len) is the decrypted application frame delivered to the registered downlink callback (mcps_indication->Buffer/BufferSize). Reaching the handler requires a frame on the clock-sync port that passes LoRaWAN's MAC integrity check and FRMPayload decryption, so the practical attacker is a malicious or compromised network/application server (the designated sender of AppTimeAns) or a party holding the session keys, rather than an arbitrary radio listener. The over-read is bounded: the backing store is a fixed 255-byte static buffer, so the few stray bytes do not fault, and the read values (time_correction, token) are used only internally and never transmitted, so there is no disclosure to the attacker and no crash. The sole effect is that a stale token matching ctx.req_token can apply a garbage time_correction to the device's own clock offset (ctx.time_offset), a minor integrity impact confined to the victim's time estimate. The fix adds an explicit length check that drops a too-short AppTimeAns. Note the sibling one-byte reads in the periodicity and force-resync handlers remain unguarded with the same negligible impact.

GitLab has remediated an issue in GitLab EE affecting all versions from 13.1 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user with reporter-role permissions who authored a merge request could have reset merge request approval rules due to improper authorization checks.

A flaw was found in the Seattle FilmWorks plugin in GIMP. When processing a specially crafted SFW image file, the plugin allocates a Variable-Length Array (VLA) on the stack without integer overflow checks, causing an unbounded stack allocation. This issue leads to an application crash, resulting in a denial of service.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.8 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, could have allowed an authenticated user to cause a denial of service affecting background job processing, due to missing object count limits.