CVE Database

In the Linux kernel, the following vulnerability has been resolved: net/smc: Do not re-initialize smc hashtables INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(), proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht being reset even though hash entries already exist and are being used, possibly resulting in a corrupted list. Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in smc_init(); it is implicitly initialised to zero anyhow. Add HLIST_HEAD_INIT to the definitions for clarity.

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called.

In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports.

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) comes from last arg to ethtool_cmis_page_init() which is rpl_exp_len. Note2 that AIs also like to point out overflows in args->req.payload itself (which is a fixed-size 120 B buffer, on the stack), but callers should be reading structs defined by the standard, so protecting from requests for more data than max seem like defensive programming.

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there.

In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries).

In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc.

In the Linux kernel, the following vulnerability has been resolved: net/handshake: Use spin_lock_bh for hn_lock nvmet_tcp_state_change(), a socket callback that runs in BH context, can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue() and tls_handshake_cancel(). handshake_req_cancel() acquires hn->hn_lock with plain spin_lock(). If a process-context thread on the same CPU holds hn->hn_lock when a softirq invokes the cancel path, the lock attempt deadlocks. This is the only caller that invokes tls_handshake_cancel() from BH context; every other consumer calls it from process context. Deferring the cancel to process context in the NVMe target is not straightforward: nvmet_tcp_schedule_release_queue() must call tls_handshake_cancel() atomically with its state transition to DISCONNECTING. If the cancel were deferred, the handshake completion callback could fire in the window before the cancel runs, observe the unexpected state, and return without dropping its kref on the queue. Reworking that interlock is considerably more invasive than hardening the handshake lock. Convert all hn->hn_lock acquisitions from spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is never taken with softirqs enabled.

In the Linux kernel, the following vulnerability has been resolved: dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work The change_work was introduced to send device change notifications from DPLL device callbacks without deadlocking on dpll_lock, since the callbacks are already invoked under that lock. Now that __dpll_device_change_ntf() is exported for callers that already hold dpll_lock, use it directly and remove the change_work infrastructure entirely. This eliminates a race condition where change_work could be re-scheduled after cancel_work_sync() during device teardown, potentially causing the handler to dereference a freed or NULL dpll_dev pointer.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success l2cap_ecred_reconf_rsp() returns early on success without clearing chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp, l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a successful transaction to prevent the channel from matching subsequent responses with the recycled ident value. A remote attacker that completed a reconfiguration as the peer can replay a failure response with the stale ident, causing the kernel to match and destroy the already-established channel via l2cap_chan_del(chan, ECONNRESET). Clear chan->ident for all matching channels on success, and harden the failure path by using l2cap_chan_hold_unless_zero() consistent with other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Skip redundant detach on already-detached port When mana_per_port_queue_reset_work_handler() runs after a previous detach succeeded but attach failed, the port is left in a detached state with apc->tx_qp and apc->rxqs already freed. Calling mana_detach() again unconditionally leads to NULL pointer dereferences during queue teardown. Add an early exit in mana_detach() when the port is already in detached state (!netif_device_present) for non-close callers, making it safe to call idempotently. This allows the queue reset handler and other recovery paths to simply retry mana_attach() without redundant teardown.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: do not trigger BUG() on BH disabled context __get_vm_area_node() currently triggers a BUG() if in_interrupt() returns true. However, in_interrupt() also reports true when BH are disabled. The bridge code can call rhashtable_lookup_insert_fast() with bottom halves disabled: __vlan_add() -> br_fdb_add_local() spin_lock_bh(&br->hash_lock); <-- Disable BH -> fdb_add_local() -> fdb_create() -> rhashtable_lookup_insert_fast() -> kvmalloc() -> vmalloc() -> __get_vm_area_node() -> BUG_ON(in_interrupt()) spin_unlock_bh(&br->hash_lock) this triggers the BUG() despite the caller not being in NMI or hard IRQ context. Replace the in_interrupt() check with in_nmi() || in_hardirq().

In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash.

In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done.

In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_writeback_endio A crash was observed in zram_writeback_endio due to a NULL pointer dereference in wake_up. The root cause is a race condition between the bio completion handler (zram_writeback_endio) and the writeback task. In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after releasing wb_ctl->done_lock. This creates a race window where the writeback task can see num_inflight become 0, return, and free wb_ctl before zram_writeback_endio calls wake_up(). CPU 0 (zram_writeback_endio) CPU 1 (writeback_store) ============================ ============================ zram_writeback_slots zram_submit_wb_request zram_submit_wb_request wait_event(wb_ctl->done_wait) spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); wake_up(&wb_ctl->done_wait); zram_complete_done_reqs spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); while (num_inflight) > 0) spin_lock(&wb_ctl->done_lock); list_del(&req->entry); spin_unlock(&wb_ctl->done_lock); // num_inflight becomes 0 atomic_dec(num_inflight); // Leave zram_writeback_slots // Free wb_ctl release_wb_ctl(wb_ctl); // UAF crash! wake_up(&wb_ctl->done_wait); This patch fixes this race by using RCU. By protecting wb_ctl with rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it, we ensure that wb_ctl remains valid during the execution of zram_writeback_endio.

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one Initialize nr_pages to 1 at the start of each loop iteration, like folio_referenced_one() does. Without this, nr_pages computed by a previous folio_unmap_pte_batch() call can be reused on a later iteration that does not run folio_unmap_pte_batch() again. mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call madvise(MADV_FREE), then make the last page device-exclusive via HMM_DMIRROR_EXCLUSIVE. Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will first clear the first 15 out of 16 entries mapping the lazyfree folio. This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets reused on a device-exclusive pte, thus potentially corrupting folio refcount/mapcount. At the moment, I have a userspace program which can make the kernel spit out a trace, but the blow up is in folio_referenced_one(), because there are existing bugs in the interaction between device-private and rmap (which too I am investigating). I did a one liner kernel change to avoid going into folio_referenced_one(), and the kernel blows up at folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted. Note that the bug is there not since file folio batching but lazyfree folio batching, since device-exclusive only works for anonymous folios. Userspace visible effect is simply kernel crashing somewhere due to refcount/mapcount corruption.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix UAF in iso_recv_frame iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock before using sk, with no reference held. A concurrent iso_sock_kill() can free sk in that window, causing use-after-free on sk->sk_state and sock_queue_rcv_skb(). Fix by replacing the bare pointer read with iso_sock_hold(conn), which calls sock_hold() while the spinlock is held, atomically elevating the refcount before the lock drops. Add a drop_put label so sock_put() is called on all exit paths where the hold succeeded.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */ iso_pi(sk)->conn is not stable across the unlock window, causing a NULL pointer dereference or use-after-free. Serialize iso_sock_clear_timer() with the socket lock by moving it inside lock_sock()/release_sock(), matching the pattern used in iso_conn_del() and all other call sites.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs).

In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2 (which traps) or ZCR_EL1 (which does not trap). KVM handles both in different way: - on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own VL limit. This has the potential to break existing SW that relies on the full LEN field to be stateful. - on ZCR_EL1 access, we do absolutely nothing. On restoring the SVE context for an L2 guest, we directly restore the guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the guest's view of the register was updated using the ZCR_EL2 accessor, the value has already been sanitised (with the caveat mentioned above). But if the guest used ZCR_EL1, the raw value is written into the HW, and the L2 guest can now access VLs that it shouldn't. Fix all the above by moving the VL capping to the restore points, ensuring that: - the HW is always programmed with a capped value, irrespective of the accessor being used, - the ZCR_EL2.LEN field is always completely stateful, irrespective of the accessor being used. Additionally, move ZCR_EL2 to be a sanitised register, ensuring that only the LEN field is actually stateful. This requires some creative construction of the RES0 mask, as the sysreg generation script does not yet generate RAZ/WI fields. [maz: rewrote commit message, tidy up access_zcr_el2()]

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer Use READ_ONCE() when reading entries/indices from the guest-accessible Page State Change buffer to defend against TOCTOU bugs. Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing (and not consuming the result!), as the guest isn't supposed to touch the buffer while it's being processed. I.e. using READ_ONCE() is all about protecting against misbehaving guests.

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe().