CVE Database

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware.

In the Linux kernel, the following vulnerability has been resolved: spi: ti-qspi: fix use-after-free after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881)

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix report_work leak on backbone_gw purge batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix overrun check in netfs_extract_user_iter() Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but the boundary check uses "> 4" instead of ">= 4", allowing index 4 to cause an out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks Change the krb5 crypto library to provide facilities to precheck the length of the message about to be decrypted or verified. Fix AF_RXRPC to make use of this to validate DATA packets secured with RxGK.

The Easy Appointments plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check and missing nonce verification on the `ea_delete_multiple_connections` AJAX action in all versions up to, and including, 3.12.27. This makes it possible for authenticated attackers, with Contributor-level access and above, to delete arbitrary connection records from the `wp_ea_connections` table, disrupting the plugin's core booking functionality.

Out-of-bounds Read (CWE-125) in BACnet packet parsing (`bacdt_datetime_to_tod`) in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.18 on LINX-A64 allows an unauthenticated remote attacker to crash `linx_a64.exe` and ultimately reboot the device via a malformed BACnet TimeSynchronization or UTC-TimeSynchronization packet with an invalid month value. The same vulnerability affects multiple other Loytec products.

Reflected Cross-Site Scripting (CWE-79) in LWEB802 in Loytec LWEB-802 before 5.0.8 on all platforms allows an unauthenticated remote attacker to execute arbitrary JavaScript in a victim's browser and perform actions with the victim's privileges via a crafted link containing a malicious `project` or `mspParams` parameter.

Exposure of Sensitive Information (CWE-200) in LWEB802 browser `localStorage` in Loytec LWEB-802 before 5.0.8 on all platforms allows an unauthenticated remote attacker to leak stored management credentials via a crafted link.

Improper control of generation of code ('Code Injection') in the variables feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows an authenticated user with variable write permission to execute arbitrary PowerShell code via a crafted variable value that is not properly escaped when written to the variables configuration file.

Improper control of generation of code ('Code Injection') in the schedule feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows an authenticated user with schedule creation permission to execute arbitrary PowerShell code via crafted schedule parameter names concatenated into a script invocation.

Improper Authentication (CWE-287) in the PAM configuration in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows a local attacker to authenticate as a uid=0 account without a password and obtain a root shell via an `/etc/passwd` entry with an empty password field.

Improper Privilege Management (CWE-269) in `/usr/bin/ltsudo` in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows a `superadmin`-group attacker to reset the password of any LARM user (including the `larmapp` service account) via the `set-passwd` subcommand.

Stored Cross-Site Scripting (CWE-79) in the OPC XML-DA server statistics in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an unauthenticated remote attacker to execute arbitrary JavaScript in an administrator's browser (session hijacking, credential theft, device reconfiguration) via a crafted `User-Agent` header in a `POST /da` request.

Note: The CVE and blog post don't exist because we determined this is actually a cloud-only issue. Access Controls are “Broken” when a user can access resources they are not authorized to access. An attacker can bypass any access control mechanisms in a web application, and gain unauthorized access to resources that are not available with their permissions. Broken access control can allow attackers to: Access resources only accessible to certain users, thus allowing unauthorized access to data Perform operations on behalf of other users, leading to account takeovers in the worst cases Attempt privilege escalation Attempt to take over an account

Although remote policy references are not retrieved during policy normalization, if they are manually retrieved via the API it can cause a denial of service attack if a huge policy is retrieved. Users are recommended to upgrade to version 3.2.3, which fixes this issue by imposing a default maximum size on data read from remote policy references.

It is possible to bypass the maximum number of normalized policy alternatives that was introduced in Apache Neethi 3.2.2 via certain crafted policies, which may lead to a denial of service attack via resource consumption. Users are recommended to upgrade to version 3.2.3, which fixes this issue.

Apache Neethi is vulnerable to uncontrolled recursion when parsing policies that lack policy Ids or with deeply nested structures, which may lead to a denial of service attack when parsing policies due to runtime memory exhaustion. Users are recommended to upgrade to version 3.2.3, which fixes this issue.

NULL Pointer Dereference vulnerability in Apache NimBLE in LE Long Term Key Request event. This requires disabled asserts (otherwise assert would trigger before NULL dereference) and bogus (or misbehaving) controller, thus severity is low. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue.

Reachable Assertion vulnerability in Apache NimBLE. A specially crafted ATT Read Multiple Variable Response (BLE_ATT_OP_READ_MULT_VAR_RSP) may trigger assert in ATT parser. Severity is medium as this requires DUT to first send ATT Read Multiple Variable Request. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue.

Out-of-bounds Write, Integer Underflow (Wrap or Wraparound) vulnerability in Apache NimBLE BASS service. Improper validation when parsing BASS service  "Add Source" and "Modify Source" operation PDU could results in stack buffer overflow or arbitrary out-of-bound read. This can be triggered by nearby devices over Bluetooth connection, however pairing is required prior to accessing BASS service, which depending on device configuration may or may not require user action. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue.

Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Apache NimBLE. The HCI socket transport did not check whether a received HCI event would fit the configured event pool before copying it, allowing a buffer overflow. Severity is low: exploitation requires either a misconfigured pool size or a malicious/compromised controller on the other end of the HCI socket link, not over-the-air Bluetooth access. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue.

A Cross-Site Scripting (XSS) vulnerability in Google Cloud Looker versions prior to 25.6.103, 25.12.65, 25.18.68, 26.0.66, 26.2.47, 26.4.36, 26.6.28, and 26.8.7 on Looker-hosted and Self-hosted allows an attacker to execute arbitrary JavaScript leading to administrative account takeover using a maliciously crafted URL. Looker-hosted and Self-hosted were found to be vulnerable. This issue has already been mitigated for Looker-hosted instances. No user action is required for these. Self-hosted instances must be upgraded to the patched versions: 25.6.103+, 25.12.65+, 25.18.68+, 26.0.66+, 26.2.47+, 26.4.36+, 26.6.28+, or 26.8.7+.

Apereo CAS Client accepts any CA-trusted certificate for any hostname, provided the URL the client is calling matches the configured allowlist or regex. An attacker with a MITM position (DNS poisoning, rogue Wi-Fi, malicious proxy, etc.) can provide any CA-signed certificate for a hostname that matches the configured allowlist or regex. This can lead to intercepting the CAS exchange, capturing the Ticket-Granting Ticket (TGT), and subsequently obtaining Service Tickets on behalf of the victim.  Because maintainers contact attempts were unsuccessful, vulnerabilities have only been confirmed in version 4.1.0 (Java Apereo CAS Client) and 3.6.4 (Jasig CAS Client) but may also affect other versions.

Local privilege escalation potentially allowed an attacker to execute arbitrary code as a privileged user.

Local privilege escalation potentially allowed an attacker to write an arbitrary file with fully controlled content as a privileged user.