CVE Database

In NLnet Labs Unbound up to and including version 1.25.1, when 'unwanted-reply-threshold' is enabled (set to any value greater than zero), glue records of 0.0.0.0/::0 can short-circuit Unbound, on systems that can direct such traffic, by issuing DNS queries and receiving seemingly unwanted replies since the remote IP does not match the original source IP of 0.0.0.0/::0. This behavior keeps on looping for the glue records and pushing the counter to the configured 'unwanted-reply-threshold' that triggers a defensive cache clear. A malicious actor who controls a delegation that returns in-bailiwick glue of 0.0.0.0/::0 can drive the counter to the limit of 'unwanted-reply-threshold' to the threshold and trigger a cache clean of the message and rrset caches; at will, indefinitely, without sending a single spoofed packet. The iterator uses the 0.0.0.0/::0 glue, and a system that can route this (e.g., Linux kernel routes the datagram over loopback), Unbound's own listener answers from 127.0.0.1. Because of the mismatch of 0.0.0.0 and 127.0.0.1, in this example, Unbound accounts the reply as an unwanted (probably spoofed) answer. The counter resets to zero on every cache flush, so the attack loops forever.

In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, when an auth/rpz zone has a configured primary hostname that resolves to BOGUS A/AAAA, it is still considered as a possible XFR endpoint. A malicious actor that can spoof the hostname's A/AAAA record (no valid RRSIG required) becomes the zone's XFR primary and can replaces the entire zone/the resolver's entire response policy.

In NLnet Labs Unbound 1.15.0 up to and including 1.25.1, the TLS server name used for DNS-over-TLS (DoT) forwarded queries is tied to a struct's ('serviced_query') lifetime but also referenced by another struct ('waiting_tcp'). When the owning struct is jostled out of the mesh while the DoT TCP stream is still handshaking it frees the storage behind the referenced string and if the TLS stream then errors out, it dereferences the freed pointer. The dereference is read-only and the practical impact is a daemon crash resulting in denial of service. A malicious actor that knows a DoT forwarding/stub Unbound's configuration could exploit the vulnerability by quering records in the appropriate zone while keeping Unbound uder pressure so that the jostle logic kicks in. If answers for the vulnerable zone are slow, the likelihood of jostling such queries is higher, although the timing of the jostle needs to be precise. Requirements for a vulnerable Unbound is the existence of a stub/forward zone configured for DoT together with a configured '#authname' suffix on the server identification. The connectivity to the server needs to exhibit a transient failure at the correct time in order to kick off the vulnerable error path.

In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, a single client query for a deeply nested name under a DNSSEC-signed parent can cause Unbound to send more upstream packets per client query than the configured 'max-global-quota'. This effectively bypasses a security configuration that limits upstream amplification traffic.

With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush.

A heap-buffer-overflow flaw was found in Directory Server (389-ds-base). When a DN contains a legacy-quoted value, the server won't close the heap allocation allowing another call to refer to the same memory pointer causing a denial of service or an arbitrary memory write operation.

In Progress® Telerik® UI for AJAX prior to v2026.2.708, the obsolete RadChart component's ChartImage.axd handler is vulnerable to unauthenticated file read and deletion of image-extension files within the application directory.

In Progress® Telerik® UI for AJAX prior to v2026.2.708, the internal LayoutBuilder control processes client-state XML without disabling DTD processing, allowing unauthenticated denial of service via recursive XML entity expansion.

In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, in DNS-over-QUIC environments, with high concurrency and under pressure, an assertion in libngtcp2 about monotonic timestamps could trigger and result in server termination and thus denial of service. When interfacing with libngtcp2, for DNS-over-QUIC support in Unbound, it is expected to use monotonic time. Unbound was using realtime instead, and in DoQ environments with high concurrency and under pressure, an assert in libngtcp2 for the quic timestamp would trigger and terminate the server.This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces.

In Progress® Telerik® UI for AJAX prior to v2026.2.708, insufficient validation of content submitted to the RadEditor PDF export feature may allow an authenticated attacker to trigger server-side requests to arbitrary hosts, resulting in outbound network connections and potential exposure of Windows authentication credentials.

In Progress® Telerik® UI for AJAX prior to v2026.2.708, DialogHandler request parameters may be tampered with, potentially altering dialog server-side behavior and enabling chained exploitation.

Open Mercato does not validate regex rules. An attacker with privileges to create the regex rule can add an unsafe regex to a field. When someone provide the proper string it can result in a DoS attack. This issue was fixed in version 0.6.4.

Traefik versions <= v2.11.51, >= v3.6.0 <= v3.6.22, and >= v3.7.0 <= v3.7.6 contain an authentication bypass via path traversal in the ReplacePathRegex middleware. When ReplacePathRegex is configured with a regex that captures user-controlled path segments without a mandatory path separator (e.g. regex "^/api(.*)", replacement "/$1"), the middleware forwards the replaced path to the backend without validating that it matches its normalized form. An unauthenticated remote attacker can send a crafted request (e.g. GET /api../admin) that produces an un-normalized path such as /../admin, which a backend that normalizes paths resolves to a protected route, bypassing authentication middleware. Fixed in v2.11.52, v3.6.23, and v3.7.7.

n8n versions before 1.123.64, 2.29.8, and 2.30.1 contain a credential exposure vulnerability: when configured with a Google Service Account key, the full PEM private key was mistakenly placed in the JWT header's kid field (intended only for a key identifier). Because JWT headers are Base64-encoded rather than encrypted, the private key could be recovered by anything that logged or inspected the JWT. An attacker who obtained the key could impersonate the service account and access or modify any Google Cloud resource it was authorized to use. Only instances using Google Service Account credentials are affected.

n8n before 1.123.64, 2.x before 2.29.8, and before 2.30.1 contains a DOM-based cross-site scripting vulnerability in the HTML preview, which renders execution output into an iframe srcdoc without the sandbox attribute. A sanitizer bypass allows injected script to execute same-origin as the editor. When a victim opens the preview, the script can call authenticated APIs using the victim's session. An account with global:member privileges can exploit the issue.

n8n before 2.29.8 and 2.30.x before 2.30.1 (affected from 2.27.0, when the OAuth 2.1 consent and token-issuance flow was introduced) does not verify that the authenticated user has access to the workflow referenced as the OAuth resource. On instances with at least one active MCP Server Trigger workflow configured with n8n OAuth2 authentication, a member-level user can register an OAuth client, self-approve consent for another user's workflow, and obtain a valid token. The workflow then runs in the owner's project context with the owner's stored credentials, and the attacker can set tool inputs and read outputs (potentially including data from the owner's connected integrations), breaking user and project isolation.

n8n versions before 1.123.64, 2.29.8, and 2.30.1 contain a server-side request forgery vulnerability in the dynamic-node-parameters endpoints that lack authorization scopes. Authenticated attackers can supply absolute URLs in routing configuration to override baseURL restrictions and make the n8n server issue HTTP requests to arbitrary internal targets when SSRF protection is disabled.

n8n before 1.123.64, 2.29.8, and 2.30.1 contains a stored DOM cross-site scripting vulnerability in the Resource Locator component, which passes the workflow-persisted cachedResultUrl parameter to window.open() without scheme validation. An attacker with workflow creation/editing privileges can craft a workflow with a malicious (e.g., javascript:) scheme in cachedResultUrl; when a victim opens the crafted workflow and interacts with external links, the payload executes in the victim's browser.

n8n versions before 1.123.64 fail to properly mask custom HTTP header credentials in LLM sub-node execution data, writing plaintext API keys and secrets to workflow execution records. Authenticated users with access to execution data can read exposed header values and credentials that persist in the database and can be exported.

n8n before 2.28.0 (and before 2.27.4 on the 2.27.x branch) registers the DELETE /${restEndpoint}/test-webhook/:id endpoint before authentication middleware is applied, allowing any unauthenticated network caller who knows a workflow ID to cancel that workflow's active test webhook registration. The impact is limited to disrupting in-progress test sessions; production webhooks, persistent workflow state, and stored data are not affected.

There is a information disclosure vulnerability in some Hikvision cameras, allowing unauthenticated attackers to obtain partial information from the device’s memory.

There is a privilege escalation vulnerability in some Hikvision cameras. Due to incorrect permission allocation in the device program, attackers can escalate privileges and gain full control of the device after authenticating via SSH.

A flaw was found in the Ansible Lightspeed Model Context Protocol (MCP) server. This vulnerability, known as path traversal, allows an attacker to manipulate an AI agent through indirect prompt injection. By doing so, the attacker can cause the server to write files to unauthorized locations on the user's system. This can result in the exposure of sensitive host information and enable the attacker to execute malicious commands, potentially leading to a full system compromise.

Denial-of-Service in Thinkst Applied Research OpenCanary (MongoDB module) allows Excessive Allocation. This issue affects OpenCanary 0.9.8 only.

A flaw was found in AWX. The websocket event consumer performs RBAC authorization checks only for event groups that are mapped in the consumer_access() function (job_events, workflow_events, ad_hoc_command_events). Three event groups - inventory_update_events, project_update_events, and system_job_events — are not mapped, causing the authorization check to be skipped. Any authenticated user can subscribe to these unmapped websocket event groups for any object ID and receive real-time stdout output from jobs belonging to organizations they have no access to. This is an incomplete remediation of CVE-2020-10698.

The The Contact Form 7 – Dynamic Text Extension plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.0.6. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. The vulnerability was partially patched in version 5.0.4.

A flaw was found in the sbc library (BlueZ SBC codec). An off-by-one error in the SBC frame decoder allows a crafted audio payload to trigger a one-byte heap out-of-bounds read. This could allow an adjacent attacker streaming Bluetooth audio to read a single byte of adjacent heap memory.

Joomla Extension - joomshopping.com - Reflective XSS in JoomShopping < 5.9.3 - The Joomla extension JoomShopping is vulnerable to an reflected XSS vulnerability in the product frontend controller.

Authorization bypass through User-Controlled key vulnerability in Universe Software Computer Marketing Trade and Industry Inc. Online Registration and Workflow Management System allows Exploiting Trust in Client. This issue affects Online Registration and Workflow Management System: through 12022026.

The Ultimate Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Navigation Menu Widget data-toggle-icon/data-close-icon Attributes in all versions up to, and including, 2.9.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. wp_kses_post, applied on save for users without unfiltered_html, does not neutralize HTML-entity-encoded payloads stored inside data-* attributes on kses-allowed elements, as the browser decodes these values client-side before jQuery .html() renders them as markup.