CVE Database

In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code. As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target. An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral. The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.

Papra is a minimalistic document management and archiving platform. Prior to version 26.5.0, Papra's webhook delivery system contains an SSRF protection bypass that allows any authenticated organisation member to cause the server to make HTTP requests to internal addresses — loopback, link-local, and RFC-1918 ranges. The SSRF protection validates the registered webhook URL but ignores redirect destinations. The HTTP client (ofetch) follows 3xx responses automatically, and the redirect target is never checked against the blocklist. An attacker registers a webhook pointing to an attacker-controlled server, which redirects incoming POSTs to any internal address. Exploitation was confirmed by live test against the official Docker image. The fix is a single-line change to the webhook HTTP client. This issue has been patched in version 26.5.0.

A vulnerability was found in ggml-org whisper.cpp 95ea8f9b. Affected is the function ggml_ftype_to_ggml_type of the file ggml/src/ggml.c. The manipulation of the argument ftype results in reachable assertion. The attack requires a local approach. The project was informed of the problem early through an issue report but has not responded yet.

An endpoint in HCL Connections is vulnerable to information disclosure. In certain scenarios this might lead to disclosing sensitive information to unauthorized users.

HCL Connections is vulnerable to information disclosure which could allow a user to obtain sensitive information they are not entitled to, caused by improper handling of request data.they are not entitled to, caused by improper handling of request data.

A vulnerability has been found in ggml-org whisper.cpp 1.8.4-58. This impacts the function log_mel_spectrogram of the file src/whisper.cpp. The manipulation leads to out-of-bounds read. The attack needs to be performed locally. The pull request to fix this issue awaits acceptance.

The Activity zte.com.cn.filer/zte.com.cn.filer.FilePreViewActivity within ZTE File Manager is designed to preview compressed files. Third-party applications can launch this Activity and supply arbitrary file paths (e.g., content://zte.com.cn.filer.fileprovider/root_path), enabling file access with the privilege level of ZTE File Manager. This allows unrooted devices to read files under certain system directories such as /data/data and /data/local/tmp. If access restrictions do not block untrusted applications, additional directories may also be accessible.

The WPBot WordPress plugin before 8.5.2 does not validate administrator-configured field identifiers before using them in a SQL query, allowing users with administrator access to perform SQL injection that executes when a visitor triggers a search.

ImageMagick before 7.1.2-27 contains a memory leak vulnerability in the magick command-line interface when invalid options are provided. Attackers can trigger memory exhaustion by repeatedly supplying malformed command-line arguments to consume system resources.

A flaw was found in pki-core. The certificate authority (CA) renewal request path does not perform the realm-based authorization check that the enrollment path performs, allowing an authenticated user entitled to one realm to cause a certificate belonging to a different realm to be renewed without that realm's authorization.

Stack-based Buffer Overflow (CWE-121) in `/usr/bin/ltsudo` `cmd_ipaddr_conflict` in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows a `superadmin`-group attacker to trigger a SUID-root process abort or potentially elevate privileges via an overly long interface-name argument.

GNU coreutils unexpand is vulnerable to a heap-based buffer overflow due to an integer overflow during buffer allocation when processing large tab stop (-t) values. The multiplication used to calculate the allocation size can wrap around, resulting in an undersized buffer. When processing crafted input, subsequent writes exceed the allocated memory, leading to an out‑of‑bounds heap write. When running GNU coreutils unexpand with attacker-provided large tab stop (-t) arguments, this behavior leads to a crash and potentially achieve a heap write primitive depending on memory layout. This issue has been fixed in the commit b60a159fdc5bfcf9988d3a4cb6f53abe8ad5d35d

The ProfileGrid WordPress plugin before 5.9.9.7 does not perform a capability check on its license management actions, relying only on a nonce that is exposed to any logged-in user, allowing authenticated users with Subscriber-level access and above to overwrite the site's premium license settings.

A security issue was discovered in the Kubernetes Java client library where a compromised pod may be able to create new files in arbitrary locations on the client machine executing copy operations via non-tar copyDirectoryFromPod when enableTarCompressing is false.

Improper output neutralization (XML injection) in QDom comment, CDATA, and processing-instruction serialization in Qt XML from 4.0.0 through 6.11 allows untrusted text serialized by an application into those nodes to inject arbitrary XML markup, because the node terminators are not escaped under the default InvalidDataPolicy (AcceptInvalidChars). Fixed in Qt 6.12.

In JetBrains GoLand before 2026.2 sensitive configuration values written to log files by default

The issue is a DNSSEC validation bypass where wildcard expansion proofs (NSEC/NSEC3 records) are accepted without signature validation when the wildcard answer is a CNAME or DNAME record.

If the auth responds very slowly and the records expire in between, the capping of TTLs is not enforced for lack of data. This does not happen on regular resolve as then then the child records are used immediately if not expired and thus valid, or the records are expired, and in that case not used. So this case can only happen if almost expired records are used to refresh the authoritative NS records.

In NLnet Labs Unbound 1.6.0 up to and including 1.25.1, the 'view_local_data' and 'view_local_datas' commands of 'unbound-control' create a bare local zones tree for an already configured named view when the view is configured with no local data to begin with. However, the creation through the control interface omits adding the default-protected zones (e.g., RFC 1918 reverse, AS112 zones, .onion, .localhost). Once the local zone tree exists without the defaults, every query for a default-protected name from a client mapped to that view escapes to the public DNS via the iterator instead of being answered locally, bypassing local policy expectations.

In NLnet Labs Unbound 1.18.0 up to and including 1.25.1, when Unbound listens on a 'proxy-protocol-port' interface with 'answer-cookie: yes', the RFC 9018 server-cookie SipHash is computed over the proxy's wire address instead of the PROXYv2-declared client. One server cookie obtained through a given proxy node therefore validates for every PROXYv2-declared source behind that node. On a UDP+proxy-protocol front, an off-path attacker can harvest one cookie with a single legitimate query, then replay it under any spoofed source and pass DNS Cookie checks that were deployed to defeat this in the first place.

diff3 tool from GNU diffutils is vulnerable to a heap‑based buffer overflow due to multiple signed integer overflows in line‑mapping calculations. Incorrect arithmetic in mapping line ranges can result in corrupted values being used for memory allocation and loop bounds. When processing crafted diff output, these overflows may cause the application to allocate insufficient memory and subsequently perform out‑of‑bounds writes during internal processing.  An attacker who can control the output of the diff program used by diff3 (e.g. via --diff-program pointing to a malicious script) can trigger out-of-bounds writes, resulting in a crash and potentially remote code execution depending on the environment. This issue has been fixed in commit 9ff04d5b84743e331e80b589335a52c5480d1815  NOTE: The project maintainers claim that this is not a security issue. They state that the worst outcome this issue can cause is a crash of diff and that it cannot be used to escalate privileges.

In NLnet Labs Unbound 1.6.2 up to and including 1.25.1, when Unbound is configured with the 'respip' module in front of the validator together with a 'response-ip' redirect rule or an RPZ file with an RPZ-IP trigger, the rewriting handler does not check the security status of the upstream answer and can instead rewrite a BOGUS A/AAAA answer to point to an operator's configured IP. If the validator finds an expired or otherwise invalid RRSIG on an answer whose A record falls within a 'response-ip'/RPZ configuration, the answer is still rewritten and given a hard coded security level of INSECURE. This results in the client receiving an INSECURE NOERROR reply rewritten by the operator's configured IP. A malicious actor can exploit the possible poisonous effect by spoofing a BOGUS A/AAAA answer that falls inside the operator's configured subnet rewrites. Such DNSSEC protected answers are then insecurely redirected to the operator's configured target.

In NLnet Labs Unbound 1.6.0 up to and including 1.25.1, a replay of a wildcard rrset as another piece of data, could be briefly considered DNSSEC secure based only on the RRSIG validation and stored into cache, before later validation treats it as bogus based on NSEC validation. When the resolving thread puts secure on the rrset, and another thread that is on the serve expired path then picks up the updated rrset contents with the secure status for a reply, it can be used to change a specific record, next to a wildcard that could be covered by the wildcard, into the wildcard. A malicious actor can exploit the possible poisonous effect by having any DNSSEC-singed domain (irrelevant to the victim domain) and a CNAME wrapper record that points to a record next to a wildcard (that could be covered by the wildcard). Then quering Unbound for the wildcard sibling record would seed the secure message. A later (after expiry) query for the CNAME wrapper would need to resolve the target sibling record. If the wildcard replay is injected into the response, the wildcard rrset will update the expired sibling record with a secure status before completing proper wildcard validation with NSEC records and eventually treating the CNAME wrapper answer as bogus. The updated poisoned rrset is now secure and points to the wildcard. This vulnerability is explicit for the serve expired path and needs injection of the signed wildcard rrset without the NSEC accompanying rrset.

In NLnet Labs Unbound 1.13.2 up to and including 1.25.1, stub or forward zones where the name is below an intermediate labed below a DNSSEC signed zone could be shadowed by the intermediate label's secure NXDOMAIN answer from the parent. This is caused by an off-by-one error in 'harden-below-nxdomain' logic; enabled by default. It effectively bypasses the configuration and the configured stub/forward zone is never contacted. 'harden-below-nxdomain' does an upward DNS cache walk together with a delegation point guard that does not allow NXDOMAIN synthesis above stub/forward zones. The guard tests the domain name but before stripping a label. This results in an iteration where the domain name equals the configured stub/forward zone apex that passes the guard, strips one more label, and probes the cache at the apex's immediate public parent. If that parent has a cached DNSSEC-secure NXDOMAIN, which it will for any private namespace nested two or more labels under a signed public name, the walk returns it and the configured stub/forward upstream is never contacted. This can only be triggered by the query for the intermediate label (between the stub/forward apex and the DNSSEC parent zone).

In NLnet Labs Unbound 1.16.2 up to and including 1.25.1, a similar vulnerability as with CVE-2026-40622 in the 'ghost domain names' family of attacks was found in Unbound that could extend the ghost domain window by up to one cached TTL configured value for A/AAAA glue records. Similar to other 'ghost domain names' attacks, an adversary needs to control a (ghost) zone and be able to query a vulnerable Unbound. A single client A/AAAA query can cause Unbound to overwrite the cached expired parent-side glue rrset and essentially extend the ghost domain window by up to one cached TTL configured value ('cache-max-ttl'). In configurations where 'harden-referral-path: yes' is used (non-default configuration), no client query is required since Unbound implicitly performs that query. This is a variant of CVE-2026-40622 which only addressed the NS query.

In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option.

A flaw was found in the Ansible Lightspeed extension for Visual Studio Code. This vulnerability allows an attacker with local access to the workstation, or malware running with the user's privileges, to read the Google Gemini API key. The extension insecurely stores the API key in plain text within the user's configuration file and writes it to output log files. This information disclosure can lead to the attacker obtaining the API credential and potentially consuming the user's API quota.

A signed integer overflow vulnerability was found in libarchive's ZIP writer. In the archive_write_zip_header function in archive_write_set_format_zip.c, when ZIP encryption is enabled and the entry file size is close to INT64_MAX, the addition of the encryption overhead to the entry size overflows int64_t, resulting in undefined behavior. This could lead to incorrect Zip64 extension decisions or potential memory corruption.

Uninitialized Use in Skia in Google Chrome prior to 150.0.7871.182 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High)

Vulnerability in the Oracle Time and Labor product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Time and Labor. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Time and Labor. CVSS 3.1 Base Score 3.1 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L).