CVE Database

In the Linux kernel, the following vulnerability has been resolved: dm_early_create: fix freeing used table on dm_resume failure If dm_resume fails, the kernel attempts to free table with dm_table_destroy, but the table was already instantiated with dm_swap_table. This commit skips the call to dm_table_destroy in this case.

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, the code would exit with DM_MAPIO_KILL. However, the range would be already locked at this point, and it wouldn't be unlocked, resulting in a deadlock. Let's move the limit check up, so that when it exits, no resources are leaked.

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again.

In the Linux kernel, the following vulnerability has been resolved: dma-fence: Make dma_fence_dedup_array() robust against 0-count input dma_fence_dedup_array() returns 1 when called with num_fences == 0: the for-loop body never executes, j stays at 0, and the final `return ++j` yields 1. This contradicts both the kernel-doc ("Return: Number of unique fences remaining in the array") and the natural expectation that 0 input gives 0 output. The caller __dma_fence_unwrap_merge() bails out via the `if (count == 0 || count == 1)` fast path and so is save. But amdgpu_userq_wait_*() could reach the dedup call with a zero local count and dereference an uninitialized fence slot in the array. Make the contract match the documentation by returning 0 early. This also skips an unnecessary sort() call on an empty array.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap() When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma) which internally calls drm_gem_vm_close() → drm_gem_object_put(), releasing the GEM object reference acquired at the start of the function. However, the close_vma label then falls through to put_obj, which calls drm_gem_object_put() a second time on the same object. If the first put releases the last reference, the object is freed and the second put accesses freed memory, causing a use-after-free. Fix by returning directly from close_vma instead of falling through to put_obj, since the close handler already performs all necessary cleanup including the object put.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Use caller client for debug BO sync amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls amdxdna_hwctx_sync_debug_bo(), but passes abo->client. amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle namespace for debug_bo_hdl and as the owner of the hardware context xarray. Those must match the file that supplied args->handle. The BO's stored client pointer is object state, not the ioctl context. Pass filp->driver_priv instead, matching the original handle lookup.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Reject firmware log with size smaller than header fw_log_from_bo() validates the tracing buffer header_size and that the log fits within the BO, but never checks that log->size is at least log->header_size. fw_log_print_buffer() then computes: u32 data_size = log->size - log->header_size; which underflows to a near-U32_MAX value when firmware reports a log whose size is smaller than its header. That huge data_size defeats the log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu: Add bounds checks for firmware log indices"), so fw_log_print_lines() reads far past the small real data region of the BO. A size of 0 also makes fw_log_from_bo() advance the offset by 0, causing the callers to loop forever on the same header. Reject logs whose size is smaller than the header (which also rejects size == 0).

In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix use-after-free during unmount During unmount or failure teardown all mon_data structures that contain monitoring event file private data are freed after which kernfs nodes are removed. However, the RDT_DELETED flag is never set for the statically allocated default resource group. A concurrent reader of an event file associated with the default resource group may, after dropping kernfs active protection, block on rdtgroup_mutex while unmount proceeds to free the file private data and destroy the kernfs node without waiting for the reader. When the mutex is released, the reader wakes up, observes that RDT_DELETED is not set for the default group, and dereferences the already-freed file private data. The scenario can be depicted as follows: CPU0 CPU1 /* * Default resource group's * monitoring data accessible via * kernfs file with kernfs_node::priv * pointing to a struct mon_data. * User opens the file for reading. */ rdtgroup_mondata_show() /* arch encounters fatal error */ rdtgroup_kn_lock_live() resctrl_exit() atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock() kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex) cpus_read_lock() resctrl_fs_teardown() mutex_lock(&rdtgroup_mutex) rmdir_all_sub() mon_put_kn_priv() /* Delete all mon_data structures */ rdtgroup_destroy_root() kernfs_destroy_root() rdtgroup_default.kn = NULL mutex_unlock(&rdtgroup_mutex) /* * rdtgroup_default.flags is empty so * rdtgroup_kn_lock_live() returns * &rdtgroup_default */ md = of->kn->priv; /* md points to freed mon_data */ Set RDT_DELETED for the default group unconditionally since the flag does not lead to the freeing of this statically allocated group. Do not allow a new resctrl mount if there are any waiters on default group of previous mount. A new mount will re-initialize the default group that would appear to waiters from previous mount as though the default group is accessible causing them to access the mon_data structures from the previous mount that have been removed.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed the per-SC metadata_dst with metadata_dst_free(), which kfree()s the object unconditionally and ignores the dst reference count. The RX datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under rcu_read_lock() via xa_load(), takes a reference with dst_hold() and attaches the dst to the skb with skb_dst_set(). A reader that already obtained the rx_sc pointer can race with the delete path and operate on freed memory. Fix the owner side by dropping the reference with dst_release() instead of freeing unconditionally, and convert the RX datapath to dst_hold_safe() so a reader racing the SC delete cannot attach a dst whose last reference was just dropped; only attach it when a reference was actually taken. mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc() before rx_sc->md_dst was allocated and initialised, so a datapath reader that looked the SC up by fs_id could observe rx_sc with md_dst still NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer whose contents were not yet visible. NULL-check the xa_load() result and md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish happens only after md_dst is fully initialised; the xarray RCU publish then pairs with the rcu_read_lock()/xa_load() in the datapath. Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element without an RCU grace period while the same datapath reads it under rcu_read_lock(); that is a separate pre-existing issue left to a follow-up patch. Found by 0sec automated security-research tooling (https://0sec.ai).

In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Fix use-after-free in user_event_mm_dup() user_event_mm_dup() walks the parent mm's enabler list locklessly under rcu_read_lock() during fork() (from copy_process()); it does not take event_mutex: rcu_read_lock(); list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link) enabler->event = user_event_get(orig->event); user_event_enabler_destroy() removes an enabler from that list with list_del_rcu() and then, without waiting for a grace period, drops the enabler's user_event reference with user_event_put() and frees the enabler with kfree(). A reader that loaded the enabler before the list_del_rcu() can still be walking it, which leads to two use-after-frees: - kfree(enabler) frees the enabler while that reader dereferences enabler->event. - user_event_put() may drop the last reference to the user_event, which is then freed (via delayed_destroy_user_event() on a work queue), while the same reader does user_event_get(orig->event) on it. Both are reachable by an unprivileged task that can open user_events_data: one multithreaded process that registers an enabler and then concurrently unregisters it and calls fork() triggers the race. KASAN reports a slab-use-after-free in user_event_mm_dup() during clone(), with a "refcount_t: addition on 0" warning when the user_event is freed. The enabler use-after-free was found first; the user_event one was reported by XIAO WU, and the earlier enabler-only fix did not address it. Defer both the user_event_put() and the kfree(enabler) to a work item queued with queue_rcu_work(), so they run only after an RCU grace period, once all readers walking the enabler list have finished. The put must run in process context because user_event_put() takes event_mutex on the last reference, so a work queue is used rather than call_rcu(). The now-unlocked put lets the locked argument of user_event_enabler_destroy() be removed; all callers are updated.

In the Linux kernel, the following vulnerability has been resolved: cpu: hotplug: Preserve per instance callback errors cpuhp_invoke_callback() unwinds earlier callbacks for the same hotplug state when one instance fails. The rollback path currently reuses ret, so a successful rollback can hide the original error and make the failed transition look successful. Keep the rollback result separate from the original error.

In the Linux kernel, the following vulnerability has been resolved: cpu: hotplug: Bound hotplug states sysfs output states_show() adds CPU hotplug state names into a single sysfs buffer using sprintf(). With enough registered states, this can write past the end of the PAGE_SIZE buffer. Use sysfs_emit_at() so output is bounded.

In the Linux kernel, the following vulnerability has been resolved: net: sit: require CAP_NET_ADMIN in the device netns for changelink ipip6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. sit was the one tunnel type not covered by the recent series that added this check to the other changelink() handlers.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: preserve tc_skb_cb across defragmentation tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through act_ct therefore loses qdisc metadata such as pkt_segs and can trigger WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled. Save and restore the full tc_skb_cb around nf_ct_handle_fragments(), matching the pattern used by ovs_ct_handle_fragments().

In the Linux kernel, the following vulnerability has been resolved: net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink vti6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

In the Linux kernel, the following vulnerability has been resolved: net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink vti_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

In the Linux kernel, the following vulnerability has been resolved: net: ipip: require CAP_NET_ADMIN in the device netns for changelink ipip_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

In the Linux kernel, the following vulnerability has been resolved: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink ip6gre_changelink() and ip6erspan_changelink() operate on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate both ops on rtnl_dev_link_net_capable() at their top, before any attribute is parsed.

In the Linux kernel, the following vulnerability has been resolved: net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY dump on the legacy IEEE802154_NL generic-netlink family. Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the modern nl802154 family exposes their equivalents to unprivileged readers by design (NL802154_CMD_GET_WPAN_PHY and NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged users" annotations).

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect() When hardware page table walker (PTW) is enabled on LoongArch, the CPU may set _PAGE_DIRTY directly in the page table entry during a write TLB miss, without going through the software TLB store handler. The software TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED together: ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED) Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e. _PAGE_MODIFIED is left unchanged. This creates a window where a PTE has _PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED clear (software is unaware). When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and _PAGE_DIRTY bits: pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY); Since _PAGE_MODIFIED was never set, the dirtiness information is lost completely. Subsequently, when memory pressure triggers page reclaim, page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty() returns false) and the page may be freed without writeback, causing data corruption. Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits: if (pte_val(pte) & _PAGE_DIRTY) pte_val(pte) |= _PAGE_MODIFIED; The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case, where pmd entries need the same treatment. This ensures the software dirty tracking bit (checked by pte_dirty() and pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is preserved across fork COW write-protection. The issue was found by the LTP madvise09 test case, which exercises page reclaim after "madvise(MADV_FREE), write and fork" operation sequence on private anonymous mappings.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix user refcount underflow in event delivery ipmi_alloc_recv_msg(user) takes the temporary user reference owned by the receive message, and ipmi_free_recv_msg() drops it again. If event delivery fails after allocating receive messages for earlier users, handle_read_event_rsp() rolls those messages back with ipmi_free_recv_msg(). That rollback path still drops user->refcount explicitly after freeing each message. The extra put can free a user that remains linked on intf->users, so later event delivery may dereference a freed user or trip refcount_t's addition-on-zero warning when ipmi_alloc_recv_msg() tries to acquire another reference. Remove the stale explicit put and the now-dead user assignment. Keep the list_del() and ipmi_free_recv_msg() calls; they are the required rollback operations.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked multiq_dequeue() takes a packet from a band's child with a direct ->dequeue() call after multiq_peek() peeked it. When the child is non-work-conserving the peek stashes the skb in the child's gso_skb, so the direct dequeue returns a different skb and orphans the stash, desyncing the child's qlen/backlog. With a qfq child reached through a peeking parent (e.g. tbf) this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_prio already does and as sch_red and sch_sfb were just fixed to do. The helper is a no-op when the child has no stash, so a work-conserving child is unaffected.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked When taprio's software path peeks a non-work-conserving child qdisc, the child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq() then takes the packet with a direct child ->dequeue() call, which ignores that stash, orphans the peeked skb and desyncs the child's qlen/backlog. With a qfq child this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb now do. The helper returns the child's stashed skb first and is a no-op when there is none, so a work-conserving child is unaffected and the gated path now consumes the skb whose length was charged to the budget.

In the Linux kernel, the following vulnerability has been resolved: fhandle: reject detached mounts in capable_wrt_mount() The recent fhandle RCU fix moved the mount namespace capability check into capable_wrt_mount(), so a non-NULL mnt_namespace survives the ns_capable() dereference. The helper still assumes the later READ_ONCE(mount->mnt_ns) must be non-NULL because may_decode_fh() checked is_mounted() first. That assumption is not stable. A detached mount from open_tree(..., OPEN_TREE_CLONE) can be dissolved on fput while open_by_handle_at() is between those checks, and umount_tree() can clear mount->mnt_ns. If the helper observes NULL, it dereferences mnt_ns->user_ns and panics. Return false when the RCU read observes a detached mount. This keeps the relaxed permission path conservative: a mount no longer attached to a namespace cannot authorize open_by_handle_at() access.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up.

In the Linux kernel, the following vulnerability has been resolved: mm/compaction: handle free_pages_prepare() properly in compaction_free() free_pages_prepare() can fail but compaction_free() does not handle the failure case. Failed pages should not be added back to cc->freepages for future use, since they can be either PageHWPoison or free_page_is_bad() and might cause data corruption.

In the Linux kernel, the following vulnerability has been resolved: mac802154: remove interfaces with RCU list deletion Queue wake, stop, and disable paths walk local->interfaces under RCU. The bulk hardware teardown path removes entries with list_del(), so an asynchronous transmit completion can follow a poisoned list node in ieee802154_wake_queue(). Use list_del_rcu() as in the single-interface removal path. The following unregister_netdevice() waits for in-flight RCU readers before freeing the netdevice, so no separate grace-period wait is needed.

In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset.