CVE Database

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef)

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. The caller already holds p->mutex and the create/destroy paths never take p->mutex, so the p->mutex -> p->event_mutex order is not inverted and no deadlock is introduced. (cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa)

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Wait on external BO kernel fences in exec IOCTL Before arming a user job, xe_exec_ioctl() only added the VM's dma-resv KERNEL slot as a dependency. That slot covers rebinds and the kernel operations of the VM's private BOs, but not external BOs (bo->vm == NULL), which carry their kernel operations (evictions, moves, ...) in their own dma-resv KERNEL slot. The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for memory management operations that must complete before the BO or its backing store may be used: any accessor is required to wait on the KERNEL fences before touching the resv. By skipping the external BOs' KERNEL slots, the exec path violated that contract and could schedule a user job while a kernel operation on an external BO mapped by the VM was still in flight, racing against it and potentially reading or writing memory that was being moved. Replace the VM-only dependency with an iteration over every object locked by the exec, adding each object's KERNEL slot as a job dependency. This covers the VM resv (rebinds and private BOs) as well as every external BO, mirroring the drm_gpuvm_resv_add_fence() call that later publishes the job fence to the same set of objects. Long-running mode continues to skip this, as before. (cherry picked from commit a6b842acf3ddd1efc53a56de9260cfa718fb35e7)

Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.

Uncontrolled resource consumption vulnerability in Apache Struts. An application that exposes an endpoint collecting Content Security Policy violation reports reads the submitted report into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. Such endpoints are ordinarily reachable without authentication. The core distribution maps no such endpoint by default; applications that do not collect violation reports are not affected. This issue affects Apache Struts: from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.

The Templately – Elementor & Gutenberg Template Library: 6500+ Free & Pro Ready Templates And Cloud! plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 3.7.1 via the fetch_remote_file function. This is due to a filename validation/destination mismatch in fetch_remote_file, where file type validation is performed against the attacker-controlled Content-Disposition filename rather than the URL-path-derived destination filename. This makes it possible for authenticated attackers, with contributor-level access and above, to execute code on the server. A GIF+PHP polyglot file passes wp_check_filetype_and_ext validation as image/gif via the Content-Disposition filename, while the actual destination path is written with a .php extension derived from the URL path, bypassing the unfiltered_upload capability gate entirely. The affected endpoints are reachable at this privilege level because Templately's entire REST API — including the cloud import endpoints used in this attack (/templately/v1/clouds/upload and /templately/v1/insert) — is authorized only by a current_user_can('delete_posts') check, with no administrator or manage_options capability requirement. The same permission gate also allows a contributor to overwrite the site's global Templately cloud connection via the /templately/v1/login endpoint with global_signin set to true. A complete remediation should both correct fetch_remote_file to validate the file type against the actual destination filename rather than the Content-Disposition header (and avoid deriving the write path from the request URL), and restrict state-changing Templately REST routes to an appropriate administrator-level capability.

The Real Estate Manager Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 12.8.6. This is due to improper capability handling in the allow_attachment_actions() function, which can treat a target user ID as a media attachment ID during user capability checks. This makes it possible for authenticated attackers, with Subscriber-level access and above, to edit an administrator account and escalate their privileges to Administrator when the targeted user ID matches the ID of an existing media attachment.

The Wholesale Market plugin for WordPress is vulnerable to privilege escalation in versions up to, and including, 2.2.2 via the ced_wholesale_request_send AJAX action. The ced_wholesale_request_send_callback() handler only verifies a nonce (which is exposed to any authenticated user through wp_localize_script on the frontend) and that the caller has a positive user ID, then calls WP_User::add_role() with the client-supplied role_required POST parameter without restricting the value to an allowlist of wholesale roles. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to Administrator when the site administrator has enabled the 'Assigning requested role directly' option.

In the Linux kernel, the following vulnerability has been resolved: crypto: sun4i-ss - Remove insecure and unused rng_alg Remove sun4i_ss_rng, as it is insecure and unused: - It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing locking and has a buffer overflow. sun4i_ss_prng_generate() fails to fill the entire buffer with cryptographic random bytes, because it rounds the destination length down and also doesn't actually wait for the hardware to be ready before pulling bytes from it. - No user of this code is known. It's usable only theoretically via the "rng" algorithm type of AF_ALG. But userspace actually just uses the actual Linux RNG (/dev/random etc) instead. And rng_algs don't contribute entropy to the actual Linux RNG either. (This may have been confused with hwrng, which does contribute entropy.) The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen and discovered by Atuin - Automated Vulnerability Discovery Engine There's no point in fixing all these vulnerabilities individually when this is unused code, so let's just remove it.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the rxrpc_call.rx_dec_buffer is unallocated and assumes that upon successful return that rx_dec_buffer must be allocated. However, rxrpc_verify_data() does not request an allocation if the rxrpc_skb_priv.len is zero. In addition, failure to allocate rx_dec_buffer will result in a call to skb_copy_bits() with a NULL destination which can trigger a NULL pointer dereference. To prevent these issues rxrpc_verify_data() is modified to always attempt to allocate the rxrpc_call.rx_dec_buffer if it is NULL. This issue was identified with assistance of a private sashiko instance.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential infinite loop in rxrpc_recvmsg() Fix the wait in rxrpc_recvmsg() also take check the oob queue.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix ACKALL packet handling rxrpc_input_ackall() accepts ACKALL packets without checking whether the call is in a state that can legitimately have outstanding transmit buffers. A forged ACKALL can therefore reach a new service call in RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued. In that state call->tx_top is zero and call->tx_queue is NULL, so rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a null-pointer dereference. Fix the handling of ACKALL packets by the following means: (1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates that the client call is connected, but nothing has been transmitted as yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything has been transmitted at least once, but we're now waiting for the stuff remaining in the Tx buffer to be ACK'd (retransmissions may still happen). The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the first packet is transmitted. RXRPC_CALL_CLIENT_AWAIT_REPLY is then narrowed in scope to indicate that all Tx packets have been ACK'd and we're now waiting for the reply to be received. (2) As per Wyatt Feng's original patch[1], the ACKALL handler then checks that the call state is one in which there might be stuff in the Tx buffer to ACK, but now this includes AWAIT_ACK rather than AWAIT_REPLY. ACKALL packets are ignored if received in the wrong state. Note that unlike Wyatt Feng's patch, it's no longer necessary to check to see if the Tx buffer exists as this the state set now covers this. (3) Make the ACKALL handler use call->tx_transmitted rather than call->tx_top as the former is explicitly the highest packet seq number transmitted, whereas the latter has a looser definition. Thanks to Jeffrey Altman for a description of the history of the ACKALL packet[1].

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the reception of a reply packet before data transmission Fix rxrpc_receiving_reply() to handle the reception of an apparent reply DATA packet before rxrpc has had a chance to send any request DATA packets on a client call by checking to see if the call has been exposed yet by sending the first packet. Without this, rxrpc_rotate_tx_window() might oops. Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by changing the do...while loop into a while loop, just in case a call is abnormally terminated by an early reply before the last request packet is transmitted.

In the Linux kernel, the following vulnerability has been resolved: afs: handle CB.InitCallBackState3 requests without a server record The cache manager callback path now attaches the server record to an incoming call through the rxrpc peer's app data. That association is not guaranteed to exist for every callback request, and most callback handlers already tolerate that case. Make CB.InitCallBackState3 follow the same pattern by checking whether a server record was attached before using it. If the peer is not mapped to a server record, trace the request and ignore it, matching the existing behaviour for other unmatched callback requests. This keeps the callback handler consistent with the rest of the cache manager service and avoids depending on peer state that may not be available for a given request.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space should be limited by the buffer size provided by the application. If the buffer is smaller than the data size, return only the portion that fits instead of failing.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via AST-based call-graph analysis using sqry.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. The adjacent io_slot_reset() already does it correctly. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. Tested on RTL8852CE by calling the handlers from a test module before and after the fix.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Correct data type for scan index to avoid infinite loop A kernel soft lockup was observed during Wi-Fi scanning on the 6GHz band. The CPU becomes stuck in rtw89_hw_scan_add_chan_ax for over 20 seconds, leading to a system panic. RIP points to 0f b6 c3 (movzbl %bl, %eax), which zero-extends the low 8 bits of RBX into RAX. RBX (the counter i) has reached a huge value: 0x137466a1. watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u16:4:6124] Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] RIP: 0010:rtw89_hw_scan_add_chan_ax+0xb3/0x6e0 [rtw89_core] Code: a0 48 89 45 a8 44 89 6d 9c 44 89 75 98 eb 29 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 c3 01 <0f> b6 c3 41 3b 44 24 74 0f 83 0b 02 00 00 0f b6 c3 48 8d 14 80 49 RSP: 0018:ffffcb48cbaa39f8 EFLAGS: 00000202 RAX: 0000000000000005 RBX: 00000000137466a1 RCX: 0000000000000000 RDX: ffff89ffc9d851a8 RSI: 0000000000004f0d RDI: 0000000096af0130 RBP: ffffcb48cbaa3a60 R08: 0000000000000000 R09: ffff8a00b7502080 R10: ffff8a00b75ff600 R11: 0000000000000000 R12: ffff89ffc7553870 R13: ffff8a00b7ac8f19 R14: ffff8a00b75020d8 R15: ffff89ffc3d54d80 FS: 0000000000000000(0000) GS:ffff8a014f962000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007558d7f9f4c4 CR3: 0000000178040001 CR4: 00000000001706f0 Call Trace: <TASK> rtw89_hw_scan_prep_chan_list_ax+0x8a/0x400 [rtw89_core] rtw89_hw_scan_start+0x546/0x8a0 [rtw89_core] ? rtw89_fw_h2c_default_cmac_tbl+0x13c/0x1f0 [rtw89_core] rtw89_ops_hw_scan+0xae/0x120 [rtw89_core] drv_hw_scan+0xbb/0x180 [mac80211] __ieee80211_start_scan+0x2fc/0x750 [mac80211] ieee80211_request_scan+0xe/0x20 [mac80211] ieee80211_scan+0x123/0x190 [mac80211] rdev_scan+0x40/0x110 [cfg80211] cfg80211_scan_6ghz+0x5a1/0xa30 [cfg80211] By objdump with source: for (i = 0; i < req->n_6ghz_params; i++) { 5fbc0: 83 c3 01 add $0x1,%ebx --> i++ 5fbc3: 0f b6 c3 movzbl %bl,%eax --> get counter fbc6: 41 3b 44 24 74 cmp 0x74(%r12),%eax * RBX: 00000000137466a1 -> %bl = a1 -> EAX = 000000a1 (161)

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1

In the Linux kernel, the following vulnerability has been resolved: OPP: Fix race between OPP addition and lookup A race exists between dev_pm_opp_add_dynamic() and dev_pm_opp_find_freq_exact(): CPU0 (add) CPU1 (lookup) ------------------------------- ------------------------------ _opp_add() mutex_lock() list_add(&new_opp->node, head) mutex_unlock() _opp_table_find_key() mutex_lock() dev_pm_opp_get(opp) kref_get() mutex_unlock() kref_init(&new_opp->kref) dev_pm_opp_put() kref_put_mutex() The newly added OPP is inserted into the list before its kref is initialized. A concurrent lookup can find this OPP and increment its reference count while it is still uninitialized, leading to refcount corruption and a potential premature free. Fix this by initializing ->kref and ->opp_table before making the OPP visible via list_add(). This ensures any concurrent lookup observes a fully initialized object. [ Viresh: Updated commit log ]

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one Sashiko notes: > regarding the bounds check in snp_filter_reserved_mem_regions() > called via walk_iomem_res_desc(): does the check > if ((range_list->num_elements * 16 + 8) > PAGE_SIZE) > allow an off-by-one heap buffer overflow? > > If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096. > Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count > (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated > PAGE_SIZE buffer. Fix this by accounting for the entry about to be written to, in addition to the entries that are already allocated.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Check for page allocation failure correctly in TIO Sashiko notes: > if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it > safe to pass it directly to page_address()? > > On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might > compute a deterministic but invalid, non-zero virtual address. The > subsequent if (tio_status) check would then evaluate to true, and > sev_tsm_init_locked() would dereference the invalid pointer. Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by checking the page allocation itself for NULL, not the resulting virtual address.

In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier mlx5_ib_alloc_transport_domain() allocates a transport domain and then may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked. Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an error. Also return 0 explicitly in the no-loopback-capability success branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init().

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path through mlx5r_umr_unmap_free_xlt(). After mlx5_odp_populate_xlt() became fallible, its error path returned directly and skipped that cleanup. This leaks the XLT DMA mapping and buffer. If the emergency XLT page was used, it also leaves xlt_emergency_page_mutex locked. Break out of the loop so execution falls through the existing cleanup path.