CVE Database

A vulnerability was found in GZ Scripts Time Slot Booking Calendar PHP 1.8. It has been declared as problematic. This vulnerability affects unknown code of the file /load.php. The manipulation of the argument first_name/second_name/phone/address_1/country leads to cross site scripting. The attack can be initiated remotely. The identifier of this vulnerability is VDB-233296. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in GZ Scripts Availability Booking Calendar PHP 1.8. It has been classified as problematic. This affects an unknown part of the file load.php of the component HTTP POST Request Handler. The manipulation of the argument cid/first_name/second_name/address_1/country leads to cross site scripting. It is possible to initiate the attack remotely. The associated identifier of this vulnerability is VDB-233295. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Starting in version 0.35.0, pipelines do not validate child UIDs, which means that a user that has access to create TaskRuns can create their own Tasks that the Pipelines controller will accept as the child Task. While the software stores and validates the PipelineRun's (api version, kind, name, uid) in the child Run's OwnerReference, it only store (api version, kind, name) in the ChildStatusReference. This means that if a client had access to create TaskRuns on a cluster, they could create a child TaskRun for a pipeline with the same name + owner reference, and the Pipeline controller picks it up as if it was the original TaskRun. This is problematic since it can let users modify the config of Pipelines at runtime, which violates SLSA L2 Service Generated / Non-falsifiable requirements. This issue can be used to trick the Pipeline controller into associating unrelated Runs to the Pipeline, feeding its data through the rest of the Pipeline. This requires access to create TaskRuns, so impact may vary depending on one Tekton setup. If users already have unrestricted access to create any Task/PipelineRun, this does not grant any additional capabilities. As of time of publication, there are no known patches for this issue.

A vulnerability was found in ThinuTech ThinuCMS 1.5 and classified as problematic. Affected by this issue is some unknown functionality of the file /contact.php. The manipulation of the argument name/body leads to cross site scripting. The attack may be launched remotely. VDB-233294 is the identifier assigned to this vulnerability.

A vulnerability has been found in ThinuTech ThinuCMS 1.5 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /author_posts.php. The manipulation of the argument author with the input g6g12<script>alert(1)</script>o8sdm leads to cross site scripting. The attack can be launched remotely. The identifier VDB-233293 was assigned to this vulnerability.

A vulnerability, which was classified as problematic, was found in SimplePHPscripts NewsLetter Script PHP 2.4. Affected is an unknown function of the file /preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. It is possible to launch the attack remotely. The identifier of this vulnerability is VDB-233292.

A vulnerability, which was classified as problematic, has been found in SimplePHPscripts Simple Forum PHP 2.7. This issue affects some unknown processing of the file /preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-233291.

A vulnerability classified as problematic was found in SimplePHPscripts Photo Gallery PHP 2.0. This vulnerability affects unknown code of the file /preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. The attack can be initiated remotely. VDB-233290 is the identifier assigned to this vulnerability.

A vulnerability classified as problematic has been found in SimplePHPscripts News Script PHP Pro 2.4. This affects an unknown part of the file /preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. It is possible to initiate the attack remotely. The identifier VDB-233289 was assigned to this vulnerability.

A vulnerability was found in SimplePHPscripts Funeral Script PHP 3.1. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. The attack may be launched remotely. The identifier of this vulnerability is VDB-233288.

A vulnerability was found in SimplePHPscripts FAQ Script PHP 2.3. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. The attack can be launched remotely. The associated identifier of this vulnerability is VDB-233287.

Stack out-of-bounds write vulnerability in IpcRxImeiUpdateImeiNoti of RILD priro to SMR Jul-2023 Release 1 cause a denial of service on the system.

A vulnerability was found in Active It Zone Active eCommerce CMS 6.5.0. It has been declared as problematic. This vulnerability affects unknown code of the file /ecommerce/support_ticket of the component Create Ticket Page. The manipulation of the argument details with the input <script>alert(1)</script> leads to cross site scripting. The attack can be initiated remotely. VDB-232954 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Onest CRM 1.0. It has been classified as problematic. This affects an unknown part of the file /admin/project/update/2 of the component Project List Handler. The manipulation of the argument name with the input <script>alert(1)</script> leads to cross site scripting. It is possible to initiate the attack remotely. The identifier VDB-232953 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Forminator WordPress plugin before 1.24.1 does not use an atomic operation to check whether a user has already voted, and then update that information. This leads to a Race Condition that may allow a single user to vote multiple times on a poll.

NVIDIA CUDA toolkit for Linux and Windows contains a vulnerability in the nvdisasm binary file, where an attacker may cause a NULL pointer dereference by providing a user with a malformed ELF file. A successful exploit of this vulnerability may lead to a partial denial of service.

CometBFT is a Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine and replicates it on many machines. An internal modification made in versions 0.34.28 and 0.37.1 to the way struct `PeerState` is serialized to JSON introduced a deadlock when new function MarshallJSON is called. This function can be called from two places. The first is via logs, setting the `consensus` logging module to "debug" level (should not happen in production), and setting the log output format to JSON. The second is via RPC `dump_consensus_state`. Case 1, which should not be hit in production, will eventually hit the deadlock in most goroutines, effectively halting the node. In case 2, only the data structures related to the first peer will be deadlocked, together with the thread(s) dealing with the RPC request(s). This means that only one of the channels of communication to the node's peers will be blocked. Eventually the peer will timeout and excluded from the list (typically after 2 minutes). The goroutines involved in the deadlock will not be garbage collected, but they will not interfere with the system after the peer is excluded. The theoretical worst case for case 2, is a network with only two validator nodes. In this case, each of the nodes only has one `PeerState` struct. If `dump_consensus_state` is called in either node (or both), the chain will halt until the peer connections time out, after which the nodes will reconnect (with different `PeerState` structs) and the chain will progress again. Then, the same process can be repeated. As the number of nodes in a network increases, and thus, the number of peer struct each node maintains, the possibility of reproducing the perturbation visible with two nodes decreases. Only the first `PeerState` struct will deadlock, and not the others (RPC `dump_consensus_state` accesses them in a for loop, so the deadlock at the first iteration causes the rest of the iterations of that "for" loop to never be reached). This regression was fixed in versions 0.34.29 and 0.37.2. Some workarounds are available. For case 1 (hitting the deadlock via logs), either don't set the log output to "json", leave at "plain", or don't set the consensus logging module to "debug", leave it at "info" or higher. For case 2 (hitting the deadlock via RPC `dump_consensus_state`), do not expose `dump_consensus_state` RPC endpoint to the public internet (e.g., via rules in one's nginx setup).

Insecure defaults in open-source Temporal Server before version 1.20 on all platforms allows an attacker to craft a task token with access to a namespace other than the one specified in the request. Creation of this task token must be done outside of the normal Temporal server flow. It requires the namespace UUID and information from the workflow history for the target namespace. Under these conditions, it is possible to interfere with pending tasks in other namespaces, such as marking a task failed or completed. If a task is targeted for completion by the attacker, the targeted namespace must also be using the same data converter configuration as the initial, valid, namespace for the task completion payload to be decoded by workers in the target namespace.

A vulnerability was found in RocketSoft Rocket LMS 1.7. It has been declared as problematic. This vulnerability affects unknown code of the file /contact/store of the component Contact Form. The manipulation of the argument name/subject/message leads to cross site scripting. The attack can be initiated remotely. The identifier of this vulnerability is VDB-232756.

A vulnerability was found in SimplePHPscripts GuestBook Script 2.2. It has been classified as problematic. This affects an unknown part of the file preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. It is possible to initiate the attack remotely. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-232755.

A vulnerability was found in SimplePHPscripts Event Script 2.1 and classified as problematic. Affected by this issue is some unknown functionality of the file preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. The attack may be launched remotely. It is recommended to upgrade the affected component. VDB-232754 is the identifier assigned to this vulnerability.

A vulnerability has been found in SimplePHPscripts Simple Blog 3.2 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file preview.php of the component URL Parameter Handler. The manipulation leads to cross site scripting. The attack can be launched remotely. It is recommended to upgrade the affected component. The identifier VDB-232753 was assigned to this vulnerability.

A vulnerability was found in SimplePHPscripts Classified Ads Script 1.8. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file user.php of the component HTTP POST Request Handler. The manipulation of the argument title leads to cross site scripting. The attack can be launched remotely. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-232711.

A vulnerability was found in SimplePHPscripts Classified Ads Script 1.8. It has been classified as problematic. Affected is an unknown function of the file /preview.php of the component URL Parameter Handler. The manipulation of the argument p leads to cross site scripting. It is possible to launch the attack remotely. It is recommended to upgrade the affected component. VDB-232710 is the identifier assigned to this vulnerability.

A security defect was identified in Foundry Issues. If a user was added to an issue on a resource that they did not have access to and consequently could not see, they could query Foundry's Notification API and receive metadata about the issue including the RID of the issue, severity, internal UUID of the author, and the user-defined title of the issue.

Microsoft Edge (Chromium-based) Spoofing Vulnerability

Improper Knox ID validation logic in notification framework prior to SMR Jun-2023 Release 1 allows local attackers to read work profile notifications without proper access permission.

Xpdf 4.04 will deadlock on a PDF object stream whose "Length" field is itself in another object stream.

The Contour Service was not checking that users had permission to create an analysis for a given dataset. This could allow an attacker to clutter up Compass folders with extraneous analyses, that the attacker would otherwise not have permission to create.

SpiceDB is an open source, Google Zanzibar-inspired, database system for creating and managing security-critical application permissions. Any user making a negative authorization decision based on the results of a `LookupResources` request with 1.22.0 is affected. For example, using `LookupResources` to find a list of resources to allow access to be okay: some subjects that should have access to a resource may not. But if using `LookupResources` to find a list of banned resources instead, then some users that shouldn't have access may. Generally, `LookupResources` is not and should not be to gate access in this way - that's what the `Check` API is for. Additionally, version 1.22.0 has included a warning about this bug since its initial release. Users are advised to upgrade to version 1.22.2. Users unable to upgrade should avoid using `LookupResources` for negative authorization decisions.