CVE Database

Adobe Premiere Pro versions 22.0 (and earlier) and 15.4.2 (and earlier) are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

WireMock is a tool for mocking HTTP services. The proxy mode of WireMock, can be protected by the network restrictions configuration, as documented in Preventing proxying to and recording from specific target addresses. These restrictions can be configured using the domain names, and in such a case the configuration is vulnerable to the DNS rebinding attacks. A similar patch was applied in WireMock 3.0.0-beta-15 for the WireMock Webhook Extensions. The root cause of the attack is a defect in the logic which allows for a race condition triggered by a DNS server whose address expires in between the initial validation and the outbound network request that might go to a domain that was supposed to be prohibited. Control over a DNS service is required to exploit this attack, so it has high execution complexity and limited impact. This issue has been addressed in version 2.35.1 of wiremock-jre8 and wiremock-jre8-standalone, version 3.0.3 of wiremock and wiremock-standalone, version 2.6.1 of the python version of wiremock, and versions 2.35.1-1 and 3.0.3-1 of the wiremock/wiremock Docker container. Users are advised to upgrade. Users unable to upgrade should either configure firewall rules to define the list of permitted destinations or to configure WireMock to use IP addresses instead of the domain names.

Redis is an in-memory database that persists on disk. Redis does not correctly identify keys accessed by `SORT_RO` and as a result may grant users executing this command access to keys that are not explicitly authorized by the ACL configuration. The problem exists in Redis 7.0 or newer and has been fixed in Redis 7.0.13 and 7.2.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A privacy issue was addressed with improved private data redaction for log entries. This issue is fixed in macOS Ventura 13.5. An app may be able to read sensitive location information.

This issue was addressed with improved redaction of sensitive information. This issue is fixed in macOS Ventura 13.5. An app may be able to determine a user’s current location.

Apache Superset would allow for SQLite database connections to be incorrectly registered when an attacker uses alternative driver names like sqlite+pysqlite or by using database imports. This could allow for unexpected file creation on Superset webservers. Additionally, if Apache Superset is using a SQLite database for its metadata (not advised for production use) it could result in more severe vulnerabilities related to confidentiality and integrity. This vulnerability exists in Apache Superset versions up to and including 2.1.0.

A cross-site request forgery (CSRF) vulnerability in Jenkins Frugal Testing Plugin 1.1 and earlier allows attackers to connect to Frugal Testing using attacker-specified credentials, and to retrieve test IDs and names from Frugal Testing, if a valid credential corresponds to the attacker-specified username.

Implicit intent hijacking vulnerability in Camera prior to versions 11.0.16.43 in Android 11, 12.1.00.30, 12.0.07.53, 12.1.03.10 in Android 12, and 13.0.01.43, 13.1.00.83 in Android 13 allows local attacker to access specific file.

A privacy issue was addressed with improved private data redaction for log entries. This issue is fixed in macOS Ventura 13.3. An app may be able to read sensitive location information.

Cacti is an open source operational monitoring and fault management framework. In Cacti 1.2.24, users with console access can be redirected to an arbitrary website after a change password performed via a specifically crafted URL. The `auth_changepassword.php` file accepts `ref` as a URL parameter and reflects it in the form used to perform the change password. It's value is used to perform a redirect via `header` PHP function. A user can be tricked in performing the change password operation, e.g., via a phishing message, and then interacting with the malicious website where the redirection has been performed, e.g., downloading malwares, providing credentials, etc. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An information disclosure vulnerability exists in the OAS Engine configuration management functionality of Open Automation Software OAS Platform v18.00.0072. A specially crafted series of network requests can lead to a disclosure of sensitive information. An attacker can send a sequence of requests to trigger this vulnerability.

An improper resource allocation vulnerability exists in the OAS Engine configuration management functionality of Open Automation Software OAS Platform v18.00.0072. A specially crafted series of network requests can lead to creation of an arbitrary directory. An attacker can send a sequence of requests to trigger this vulnerability.

Vyper is a Pythonic Smart Contract Language. In affected versions the order of evaluation of the arguments of the builtin functions `uint256_addmod`, `uint256_mulmod`, `ecadd` and `ecmul` does not follow source order. This behaviour is problematic when the evaluation of one of the arguments produces side effects that other arguments depend on. A patch is currently being developed on pull request #3583. When using builtins from the list above, users should make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects.

Vyper is a Pythonic Smart Contract Language. For the following (probably non-exhaustive) list of expressions, the compiler evaluates the arguments from right to left instead of left to right. `unsafe_add, unsafe_sub, unsafe_mul, unsafe_div, pow_mod256, |, &, ^ (bitwise operators), bitwise_or (deprecated), bitwise_and (deprecated), bitwise_xor (deprecated), raw_call, <, >, <=, >=, ==, !=, in, not in (when lhs and rhs are enums)`. This behaviour becomes a problem when the evaluation of one of the arguments produces side effects that other arguments depend on. The following expressions can produce side-effect: state modifying external call , state modifying internal call, `raw_call`, `pop()` when used on a Dynamic Array stored in the storage, `create_minimal_proxy_to`, `create_copy_of`, `create_from_blueprint`. This issue has not yet been patched. Users are advised to make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects.

The Orders Tracking for WooCommerce WordPress plugin before 1.2.6 doesn't validate the file_url parameter when importing a CSV file, allowing high privilege users with the manage_woocommerce capability to access any file on the web server via a Traversal attack. The content retrieved is however limited to the first line of the file.

A vulnerability was found in Dreamer CMS up to 4.1.3. It has been classified as problematic. Affected is an unknown function of the file /upload/ueditorConfig?action=config. The manipulation leads to files or directories accessible. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-238632. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic has been found in TOTVS RM 12.1. Affected is an unknown function of the file Login.aspx of the component Portal. The manipulation of the argument VIEWSTATE leads to cross site scripting. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. It is possible to mitigate the problem by applying the configuration setting <pages validateRequest="true" [...] viewStateEncryptionMode="Always" />. It is recommended to change the configuration settings. The vendor was initially contacted early about this disclosure but did not respond in any way. In a later statement he explains, that "the behavior described [...] is related to specific configurations that are not part of the default application setup. In standard production environments, the relevant feature (VIEWSTATE) is disabled by default, which effectively mitigates the risk of exploitation."

In a typical Virtual Machine Monitor (VMM) there are several components, such as boot loader, virtual device drivers, virtio backend drivers and vhost drivers, that need to access the VM physical memory. The vm-memory rust crate provides a set of traits to decouple VM memory consumers from VM memory providers. An issue was discovered in the default implementations of the `VolatileMemory::{get_atomic_ref, aligned_as_ref, aligned_as_mut, get_ref, get_array_ref}` trait functions, which allows out-of-bounds memory access if the `VolatileMemory::get_slice` function returns a `VolatileSlice` whose length is less than the function’s `count` argument. No implementations of `get_slice` provided in `vm_memory` are affected. Users of custom `VolatileMemory` implementations may be impacted if the custom implementation does not adhere to `get_slice`'s documentation. The issue started in version 0.1.0 but was fixed in version 0.12.2 by inserting a check that verifies that the `VolatileSlice` returned by `get_slice` is of the correct length. Users are advised to upgrade. There are no known workarounds for this issue.

A vulnerability was found in Infosoftbd Clcknshop 1.0.0. It has been declared as problematic. This vulnerability affects unknown code of the file /collection/all. The manipulation of the argument q leads to cross site scripting. The attack can be initiated remotely. VDB-238570 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue has been discovered in GitLab affecting all versions starting from 15.2 before 16.1.5, all versions starting from 16.2 before 16.2.5, all versions starting from 16.3 before 16.3.1. A namespace-level banned user can access the API.

An issue has been discovered in GitLab affecting all versions starting from 4.1 before 16.1.5, all versions starting from 16.2 before 16.2.5, all versions starting from 16.3 before 16.3.1 where it was possible to create a URL that would redirect to a different project.

An issue has been discovered in GitLab affecting all versions starting from 10.0 before 16.1.5, all versions starting from 16.2 before 16.2.5, all versions starting from 16.3 before 16.3.1. Due to improper permission validation it was possible to edit labels description by an unauthorised user.

Graylog is a free and open log management platform. Graylog makes use of only one single source port for DNS queries. Graylog binds a single socket for outgoing DNS queries and while that socket is bound to a random port number it is never changed again. This goes against recommended practice since 2008, when Dan Kaminsky discovered how easy is to carry out DNS cache poisoning attacks. In order to prevent cache poisoning with spoofed DNS responses, it is necessary to maximise the uncertainty in the choice of a source port for a DNS query. Although unlikely in many setups, an external attacker could inject forged DNS responses into a Graylog's lookup table cache. In order to prevent this, it is at least recommendable to distribute the DNS queries through a pool of distinct sockets, each of them with a random source port and renew them periodically. This issue has been addressed in versions 5.0.9 and 5.1.3. Users are advised to upgrade. There are no known workarounds for this issue.

Graylog is a free and open log management platform. A partial path traversal vulnerability exists in Graylog's `Support Bundle` feature. The vulnerability is caused by incorrect user input validation in an HTTP API resource. Graylog's Support Bundle feature allows an attacker with valid Admin role credentials to download or delete files in sibling directories of the support bundle directory. The default `data_dir` in operating system packages (DEB, RPM) is set to `/var/lib/graylog-server`. The data directory for the Support Bundle feature is always `<data_dir>/support-bundle`. Due to the partial path traversal vulnerability, an attacker with valid Admin role credentials can read or delete files in directories that start with a `/var/lib/graylog-server/support-bundle` directory name. The vulnerability would allow the download or deletion of files in the following example directories: `/var/lib/graylog-server/support-bundle-test` and `/var/lib/graylog-server/support-bundlesdirectory`. For the Graylog Docker images, the `data_dir` is set to `/usr/share/graylog/data` by default. This vulnerability is fixed in Graylog version 5.1.3 and later. Users are advised to upgrade. Users unable to upgrade should block all HTTP requests to the following HTTP API endpoints by using a reverse proxy server in front of Graylog. `GET /api/system/debug/support/bundle/download/{filename}` and `DELETE /api/system/debug/support/bundle/{filename}`.

IBM Security Verify Information Queue 10.0.4 and 10.0.5 stores sensitive information in plain clear text which can be read by a local user. IBM X-Force ID: 256013.

Sensitive Cookie in HTTPS Session Without 'Secure' Attribute in GitHub repository instantsoft/icms2 prior to 2.16.1.

Graylog is a free and open log management platform. In a multi-node Graylog cluster, after a user has explicitly logged out, a user session may still be used for API requests until it has reached its original expiry time. Each node maintains an in-memory cache of user sessions. Upon a cache-miss, the session is loaded from the database. After that, the node operates solely on the cached session. Modifications to sessions will update the cached version as well as the session persisted in the database. However, each node maintains their isolated version of the session. When the user logs out, the session is removed from the node-local cache and deleted from the database. The other nodes will however still use the cached session. These nodes will only fail to accept the session id if they intent to update the session in the database. They will then notice that the session is gone. This is true for most API requests originating from user interaction with the Graylog UI because these will lead to an update of the session's "last access" timestamp. If the session update is however prevented by setting the `X-Graylog-No-Session-Extension:true` header in the request, the node will consider the (cached) session valid until the session is expired according to its timeout setting. No session identifiers are leaked. After a user has logged out, the UI shows the login screen again, which gives the user the impression that their session is not valid anymore. However, if the session becomes compromised later, it can still be used to perform API requests against the Graylog cluster. The time frame for this is limited to the configured session lifetime, starting from the time when the user logged out. This issue has been addressed in versions 5.0.9 and 5.1.3. Users are advised to upgrade.

xrdp is an open source remote desktop protocol (RDP) server. In versions prior to 0.9.23 improper handling of session establishment errors allows bypassing OS-level session restrictions. The `auth_start_session` function can return non-zero (1) value on, e.g., PAM error which may result in in session restrictions such as max concurrent sessions per user by PAM (ex ./etc/security/limits.conf) to be bypassed. Users (administrators) don't use restrictions by PAM are not affected. This issue has been addressed in release version 0.9.23. Users are advised to upgrade. There are no known workarounds for this issue.

Server-Side Request Forgery (SSRF) in GitHub repository bookstackapp/bookstack prior to v23.08.

Due to a misconfiguration, the WARP Mobile Client (< 6.29) for Android was susceptible to a tapjacking attack. In the event that an attacker built a malicious application and managed to install it on a victim's device, the attacker would be able to trick the user into believing that the app shown on the screen was the WARP client when in reality it was the attacker's app.