CVE Database

Improper neutralization of special elements used in a command ('command injection') in Microsoft Bing Images allows an unauthorized attacker to execute code over a network.

OpenClaw before 2026.2.24 contains a sandbox network isolation bypass vulnerability that allows trusted operators to join another container's network namespace. Attackers can configure the docker.network parameter with container:<id> values to reach services in target container namespaces and bypass network hardening controls.

OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1.

OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the parse_question function. The issue is triggered by PTR queries for reverse DNS domains (.in-addr.arpa and .ip6.arpa). DNS packets received on UDP port 5353 are expanded by dn_expand into an 8096-byte global buffer (name_buffer), which is then copied via an unbounded strcpy into a fixed 256-byte stack buffer when handling TYPE_PTR queries. The overflow is possible because dn_expand converts non-printable ASCII bytes (e.g., 0x01) into multi-character octal representations (e.g., \001), significantly inflating the expanded name beyond the stack buffer's capacity. A crafted DNS packet can exploit this expansion behavior to overflow the stack buffer, making the vulnerability reachable through normal multicast DNS packet processing. This issue has been fixed in versions 24.10.6 and 25.12.1.

Heap-based buffer overflow in the KCAPI ECC code path of wc_ecc_import_x963_ex() in wolfSSL wolfcrypt allows a remote attacker to write attacker-controlled data past the bounds of the pubkey_raw buffer via a crafted oversized EC public key point. The WOLFSSL_KCAPI_ECC code path copies the input to key->pubkey_raw (132 bytes) using XMEMCPY without a bounds check, unlike the ATECC code path which includes a length validation. This can be triggered during TLS key exchange when a malicious peer sends a crafted ECPoint in ServerKeyExchange.

Stack Buffer Overflow in wc_HpkeLabeledExtract via Oversized ECH Config. A vulnerability existed in wolfSSL 5.8.4 ECH (Encrypted Client Hello) support, where a maliciously crafted ECH config could cause a stack buffer overflow on the client side, leading to potential remote execution and client program crash. This could be exploited by a malicious TLS server supporting ECH. Note that ECH is off by default, and is only enabled with enable-ech.

Heap Overflow in TLS 1.3 ECH parsing. An integer underflow existed in ECH extension parsing logic when calculating a buffer length, which resulted in writing beyond the bounds of an allocated buffer. Note that in wolfSSL, ECH is off by default, and the ECH standard is still evolving.

Improper neutralization of special elements used in an os command ('os command injection') in Microsoft Bing Images allows an unauthorized attacker to execute code over a network.

Server-side request forgery (ssrf) in Azure Cloud Shell allows an unauthorized attacker to elevate privileges over a network.

qui is a web interface for managing qBittorrent instances. Versions 1.14.1 and below use a permissive CORS policy that reflects arbitrary origins while also returning Access-Control-Allow-Credentials: true, effectively allowing any external webpage to make authenticated requests on behalf of a logged-in user. An attacker can exploit this by tricking a victim into loading a malicious webpage, which silently interacts with the application using the victim's session and potentially exfiltrating sensitive data such as API keys and account credentials, or even achieving full system compromise through the built-in External Programs manager. Exploitation requires that the victim access the application via a non-localhost hostname and load an attacker-controlled webpage, making highly targeted social-engineering attacks the most likely real-world scenario. This issue was not fixed at the time of publication.

Step CA is an online certificate authority for secure, automated certificate management for DevOps. Versions 0.30.0-rc6 and below do not safeguard against unauthenticated certificate issuance through the SCEP UpdateReq. This issue has been fixed in version 0.30.0.

Server-side request forgery (ssrf) in Microsoft Exchange allows an authorized attacker to elevate privileges over a network.

OpenEMR is a free and open source electronic health records and medical practice management application. Versions prior to 8.0.0.2 contain a Command injection vulnerability in the backup functionality that can be exploited by authenticated attackers. The vulnerability exists due to insufficient input validation in the backup functionality. Version 8.0.0.2 fixes the issue.

Two buffer overflow vulnerabilities existed in the wolfSSL CRL parser when parsing CRL numbers: a heap-based buffer overflow could occur when improperly storing the CRL number as a hexadecimal string, and a stack-based overflow for sufficiently sized CRL numbers. With appropriately crafted CRLs, either of these out of bound writes could be triggered. Note this only affects builds that specifically enable CRL support, and the user would need to load a CRL from an untrusted source.

An issue in DedeCMS v.5.7.118 and before allows a remote attacker to execute arbitrary code via the array_filter component

Use of a deterministic credential generation algorithm in /ftl/bin/calc_f2 in Small Cell Sercomm SCE4255W (FreedomFi Englewood) firmware before DG3934v3@2308041842 allows remote attackers to derive valid administrative/root credentials from the device's MAC address, enabling authentication bypass and full device access.

OS command injection in the CWMP client (/ftl/bin/cwmp) of Small Cell Sercomm SCE4255W (FreedomFi Englewood) firmware before DG3934v3@2308041842 allows remote attackers controlling the ACS endpoint to execute arbitrary commands as root via a crafted TR-069 Download URL that is passed unescaped into the firmware upgrade pipeline.

Use of a hard-coded AES-256-CBC key in the configuration backup/restore implementation of Small Cell Sercomm SCE4255W (FreedomFi Englewood) firmware before DG3934v3@2308041842 allows remote authenticated users to decrypt, modify, and re-encrypt device configurations, enabling credential manipulation and privilege escalation via the GUI import/export functions.

OPEXUS eComplaint and eCASE before version 10.1.0.0 include the secret verification code in the HTTP response when requesting a password reset via 'ForcePasswordReset.aspx'. An attacker who knows an existing user's email address can reset the user's password and security questions. Existing security questions are not asked during the process.

An issue in wgcloud v.2.3.7 and before allows a remote attacker to execute arbitrary code via the test connection function

A malicious actor with access to the network could exploit a Path Traversal vulnerability found in the UniFi Network Application to access files on the underlying system that could be manipulated to access an underlying account.

XML::Parser versions through 2.47 for Perl has an off-by-one heap buffer overflow in st_serial_stack. In the case (stackptr == stacksize - 1), the stack will NOT be expanded. Then the new value will be written at location (++stackptr), which equals stacksize and therefore falls just outside the allocated buffer. The bug can be observed when parsing an XML file with very deep element nesting

Unrestricted Upload of File with Dangerous Type vulnerability in Syarif Mobile App Editor mobile-app-editor allows Upload a Web Shell to a Web Server.This issue affects Mobile App Editor: from n/a through <= 1.3.1.

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in ThimPress BuilderPress builderpress allows PHP Local File Inclusion.This issue affects BuilderPress: from n/a through <= 2.0.1.

Deserialization of Untrusted Data vulnerability in Themeton Finag allows Object Injection.This issue affects Finag: from n/a through 1.5.0.

Deserialization of Untrusted Data vulnerability in Themeton Zuut allows Object Injection.This issue affects Zuut: from n/a through 1.4.2.

Incorrect Privilege Assignment vulnerability in Rymera Web Co Pty Ltd. Woocommerce Wholesale Lead Capture woocommerce-wholesale-lead-capture allows Privilege Escalation.This issue affects Woocommerce Wholesale Lead Capture: from n/a through <= 2.0.3.1.

Unrestricted Upload of File with Dangerous Type vulnerability in Rymera Web Co Pty Ltd. Woocommerce Wholesale Lead Capture woocommerce-wholesale-lead-capture allows Using Malicious Files.This issue affects Woocommerce Wholesale Lead Capture: from n/a through <= 2.0.3.1.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Cozmoslabs Profile Builder Pro allows Blind SQL Injection.This issue affects Profile Builder Pro: from n/a before 3.14.0.

Romeo gives the capability to reach high code coverage of Go ≥1.20 apps by helping to measure code coverage for functional and integration tests within GitHub Actions. Prior to version 0.2.1, due to a mis-written NetworkPolicy, a malicious actor can pivot from the "hardened" namespace to any Pod out of it. This breaks the security-by-default property expected as part of the deployment program, leading to a potential lateral movement. Removing the `inter-ns` NetworkPolicy patches the vulnerability in version 0.2.1. If updates are not possible in production environments, manually delete `inter-ns` and update as soon as possible. Given one's context, delete the failing network policy that should be prefixed by `inter-ns-` in the target namespace.