CVE Database

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix slab-use-after-free in __inet_lookup_established The ehash table lookups are lockless and rely on SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability during RCU read-side critical sections. Both tcp_prot and tcpv6_prot have their slab caches created with this flag via proto_register(). However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into tcpv6_prot_override during inet_init() (fs_initcall, level 5), before inet6_init() (module_init/device_initcall, level 6) has called proto_register(&tcpv6_prot). At that point, tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab remains NULL permanently. This causes MPTCP v6 subflow child sockets to be allocated via kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so when these sockets are freed without SOCK_RCU_FREE (which is cleared for child sockets by design), the memory can be immediately reused. Concurrent ehash lookups under rcu_read_lock can then access freed memory, triggering a slab-use-after-free in __inet_lookup_established. Fix this by splitting the IPv6-specific initialization out of mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called from mptcp_proto_v6_init() before protocol registration. This ensures tcpv6_prot_override.slab correctly inherits the SLAB_TYPESAFE_BY_RCU slab cache.

In the Linux kernel, the following vulnerability has been resolved: seg6: separate dst_cache for input and output paths in seg6 lwtunnel The seg6 lwtunnel uses a single dst_cache per encap route, shared between seg6_input_core() and seg6_output_core(). These two paths can perform the post-encap SID lookup in different routing contexts (e.g., ip rules matching on the ingress interface, or VRF table separation). Whichever path runs first populates the cache, and the other reuses it blindly, bypassing its own lookup. Fix this by splitting the cache into cache_input and cache_output, so each path maintains its own cached dst independently.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject oversized global TT response buffers batadv_tt_prepare_tvlv_global_data() builds the allocation length for a global TT response in 16-bit temporaries. When a remote originator advertises a large enough global TT, the TT payload length plus the VLAN header offset can exceed 65535 and wrap before kmalloc(). The full-table response path still uses the original TT payload length when it fills tt_change, so the wrapped allocation is too small and batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object before the later packet-size check runs. Fix this by rejecting TT responses whose TVLV value length cannot fit in the 16-bit TVLV payload length field.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: hold claim backbone gateways by reference batadv_bla_add_claim() can replace claim->backbone_gw and drop the old gateway's last reference while readers still follow the pointer. The netlink claim dump path dereferences claim->backbone_gw->orig and takes claim->backbone_gw->crc_lock without pinning the underlying backbone gateway. batadv_bla_check_claim() still has the same naked pointer access pattern. Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate on a stable gateway reference until the read-side work is complete. This keeps the dump and claim-check paths aligned with the lifetime rules introduced for the other BLA claim readers.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix integer underflow in chain mode The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: reject undecryptable rxkad response tickets rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then parses the buffer as plaintext without checking whether crypto_skcipher_decrypt() succeeded. A malformed RESPONSE can therefore use a non-block-aligned ticket length, make the decrypt operation fail, and still drive the ticket parser with attacker-controlled bytes. Check the decrypt result and abort the connection with RXKADBADTICKET when ticket decryption fails.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix RESPONSE authenticator parser OOB read rxgk_verify_authenticator() copies auth_len bytes into a temporary buffer and then passes p + auth_len as the parser limit to rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the parser end pointer by a factor of four and lets malformed RESPONSE authenticators read past the kmalloc() buffer. Decoded from the original latest-net reproduction logs with scripts/decode_stacktrace.sh: BUG: KASAN: slab-out-of-bounds in rxgk_verify_response() Call Trace: dump_stack_lvl() [lib/dump_stack.c:123] print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482] kasan_report() [mm/kasan/report.c:597] rxgk_verify_response() [net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167 net/rxrpc/rxgk.c:1274] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] process_one_work() [kernel/workqueue.c:3281] worker_thread() [kernel/workqueue.c:3353 kernel/workqueue.c:3440] kthread() [kernel/kthread.c:436] ret_from_fork() [arch/x86/kernel/process.c:164] Allocated by task 54: rxgk_verify_response() [include/linux/slab.h:954 net/rxrpc/rxgk.c:1155 net/rxrpc/rxgk.c:1274] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] Convert the byte count to __be32 units before constructing the parser limit.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix integer overflow in rxgk_verify_response() In rxgk_verify_response(), there's a potential integer overflow due to rounding up token_len before checking it, thereby allowing the length check to be bypassed. Fix this by checking the unrounded value against len too (len is limited as the response must fit in a single UDP packet).

In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush() smbd_send_batch_flush() already calls smbd_free_send_io(), so we should not call it again after smbd_post_send() moved it to the batch list.

In the Linux kernel, the following vulnerability has been resolved: smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list() smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(), so we should not call it again after post_sendmsg() moved it to the batch list.

In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submitted, causing a heap out-of-bounds write when usbip_recv_iso() writes to urb->iso_frame_desc[i] beyond the allocated region. KASAN confirmed this with kernel 7.0.0-rc5: BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640 Write of size 4 at addr ffff888106351d40 by task vhci_rx/69 The buggy address is located 0 bytes to the right of allocated 320-byte region [ffff888106351c00, ffff888106351d40) The server side (stub_rx.c) and gadget side (vudc_rx.c) already validate number_of_packets in the CMD_SUBMIT path since commits c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input"). The server side validates against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point. On the client side we have the original URB, so we can use the tighter bound: the response must not exceed the original number_of_packets. This mirrors the existing validation of actual_length against transfer_buffer_length in usbip_recv_xbuff(), which checks the response value against the original allocation size. Kelvin Mbogo's series ("usb: usbip: fix integer overflow in usbip_recv_iso()", v2) hardens the receive-side functions themselves; this patch complements that work by catching the bad value at its source -- in usbip_pack_ret_submit() before the overwrite -- and using the tighter per-URB allocation bound rather than the global USBIP_MAX_ISO_PACKETS limit. Fix this by checking rpdu->number_of_packets against urb->number_of_packets in usbip_pack_ret_submit() before the overwrite. On violation, clamp to zero so that usbip_recv_iso() and usbip_pad_iso() safely return early.

In the Linux kernel, the following vulnerability has been resolved: mm: call ->free_folio() directly in folio_unmap_invalidate() We can only call filemap_free_folio() if we have a reference to (or hold a lock on) the mapping. Otherwise, we've already removed the folio from the mapping so it no longer pins the mapping and the mapping can be removed, causing a use-after-free when accessing mapping->a_ops. Follow the same pattern as __remove_mapping() and load the free_folio function pointer before dropping the lock on the mapping. That lets us make filemap_free_folio() static as this was the only caller outside filemap.c.

In the Linux kernel, the following vulnerability has been resolved: smb: server: let send_done handle a completion without IB_SEND_SIGNALED With smbdirect_send_batch processing we likely have requests without IB_SEND_SIGNALED, which will be destroyed in the final request that has IB_SEND_SIGNALED set. If the connection is broken all requests are signaled even without explicit IB_SEND_SIGNALED.

CodeChecker is an analyzer tooling, defect database and viewer extension for the Clang Static Analyzer and Clang Tidy. Authentication bypass occurs when the URL ends with Authentication with certain function calls.  This bypass allows assigning arbitrary permission to any user existing in CodeChecker. This issue affects CodeChecker: through 6.27.3.

Exposure of sensitive information to an unauthorized actor in Azure IOT Central allows an authorized attacker to elevate privileges over a network.

Delta Electronics AS320T has denial of service via the undocumented subfunction vulnerability.

Delta Electronics AS320T has no checking of the length of the buffer with the directory name vulnerability.

Delta Electronics AS320T has No checking of the length of the buffer with the file name vulnerability.

Delta Electronics AS320T has incorrect calculation of the buffer size on the stack in the GET/PUT request handler of the web service.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 8.2.6.4 have a SQL injection vulnerability in the haproxy_section_save function in app/routes/config/routes.py. The server_ip parameter, sourced from the URL path, is passed unsanitized through multiple function calls and ultimately interpolated into a SQL query string using Python string formatting, allowing attackers to execute arbitrary SQL commands. Version 8.2.6.4 fixes the issue.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.4, the haproxy_section_save interface presents a vulnerability that could lead to remote code execution due to path traversal and writing into scheduled tasks. Version 8.2.6.4 fixes the issue.

A vulnerability in  SenseLive X3050’s web management interface allows unauthorized access to certain configuration endpoints due to improper access control enforcement. An attacker with network access to the device may be able to bypass the intended authentication mechanism and directly interact with sensitive configuration functions.

A vulnerability in SenseLive X3050’s embedded management service allows full administrative control to be established without any form of authentication or authorization on the SenseLive config application. The service accepts management connections from any reachable host, enabling unrestricted modification of critical configuration parameters, operational modes, and device state through a vendor-supplied or compatible client.

A vulnerability in SenseLive X3050’s web management interface allows authentication logic to be performed entirely on the client side, relying on hardcoded values within browser-executed scripts rather than server-side verification. An attacker with access to the login page could retrieve these exposed parameters and gain unauthorized access to administrative functionality.

A vulnerability exists in SenseLive X3050's web management interface that allows critical configuration parameters to be modified without sufficient authentication or server-side validation. By applying unsupported or disruptive values to recovery mechanisms and network settings, an attacker can induce a persistent lockout state. Because the device lacks a physical reset button, recovery requires specialized technical access via the console to perform a factory reset, resulting in a total denial-of-service for the gateway and its connected RS-485 downstream systems.

A vulnerability in SenseLive X3050’s remote management service allows firmware retrieval and update operations to be performed without authentication or authorization. The service accepts firmware-related requests from any reachable host and does not verify user privileges, integrity of uploaded images, or the authenticity of provided firmware.

Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, the GraphCypherQAChain node forwards user-provided input directly into the Cypher query execution pipeline without proper sanitization. An attacker can inject arbitrary Cypher commands that are executed on the underlying Neo4j database, enabling data exfiltration, modification, or deletion. This vulnerability is fixed in 3.1.0.

Server-side request forgery (ssrf) in Microsoft Entra ID Entitlement Management allows an unauthorized attacker to perform spoofing over a network.

Deserialization of untrusted data in Microsoft Bing allows an unauthorized attacker to execute code over a network.

Url redirection to untrusted site ('open redirect') in M365 Copilot allows an unauthorized attacker to elevate privileges over a network.