CVE Database

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Replace the committing counter check with current_context checks, which are set at the entry of ring_buffer_lock_reserve() and remain valid throughout the entire write operation, providing a reliable indicator of buffer busy state during swap.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix Route Information option length validation rt6_route_rcv() validates the Route Information option (RFC 4191) length against the prefix length, but both checks are off by one. rinfo->length is the ND option length in units of 8 octets and it *includes* the 8-byte option header, so an option carrying N bytes of prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3 when Prefix Length is greater than 64, and 2 or 3 when it is greater than 0. The code accepts length >= 2 and length >= 1 respectively. ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix, so a Router Advertisement with (prefix_len=128, length=2) or (prefix_len=64, length=1) makes the kernel read up to 8 bytes past the end of the option. Those bytes end up in the prefix of the route that gets installed, so they are visible to userspace: # RA with a Route Information option (prefix_len=128, length=2) # followed by a source link-layer address option, 01 01 de ad be ef ca fe $ ip -6 route show 2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra ^^^^^^^^^^^^^^^^^^ the next option, read out of bounds When the Route Information option is the last one in the packet, those eight bytes come from the skb tail room instead. Reject the option lengths RFC 4191 does not allow.

In the Linux kernel, the following vulnerability has been resolved: fscrypt: use the mount idmap for the owner check in fscrypt_ioctl_set_policy() fscrypt_ioctl_set_policy() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing an encryption policy to be set, instead of the idmap of the mount the ioctl was issued on. fscrypt is used by filesystems that support idmapped mounts (e.g. ext4, f2fs), so on such a mount this compares the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EACCES and an unrelated caller wrongly allowed. Use file_mnt_idmap(filp) instead.

In the Linux kernel, the following vulnerability has been resolved: sched/psi: Shut down rtpoll_timer in psi_cgroup_free() psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock: psi_schedule_rtpoll_work() psi_trigger_destroy() rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer, ...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy); The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory. 461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrupt it. 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the initialization into group_init() and the deletion into the locked section, trading the creation races for the window above. Neither placement in the destruction path works. A pending timer firing while the group is alive is harmless though. poll_timer_fn() just wakes the rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it by then. timer_shutdown_sync() because the timer is never armed again.

In the Linux kernel, the following vulnerability has been resolved: ima: Instantiate file_truncate and path_truncate hooks Instantiate the file_truncate and path_truncate LSM hooks to reset the action cache flags (IMA_DONE_MASK) as soon as truncation is requested, so the file, based on policy, is re-collected, re-measured, re-audited, and re-appraised on next access.

In the Linux kernel, the following vulnerability has been resolved: fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions The BPF verifier and the dynptr abstraction ensure that the memory space referenced by a dynptr remains valid. They do not, however, provide any guarantee that the contents of the memory are stable. kfuncs are expected to remain memory-safe even if concurrent modifications occur. bpf_get_fsverity_digest() didn't follow that: it could crash if arg->digest_size was concurrently modified. Fix that by using the known-good value hash_alg->digest_size instead. Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return type of __bpf_dynptr_size(). It doesn't appear that it can actually be more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes file-based pointers), but the correct type might as well be used.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix sk_redir use-after-free in send verdict sk_psock_msg_verdict() takes a socket reference for psock->sk_redir. tcp_bpf_send_verdict() copies that pointer while holding the source socket lock, but does not take a reference for the local copy before dropping the lock around tcp_bpf_sendmsg_redir(). When apply_bytes keeps the cached verdict active, another sendmsg() on the same source socket can consume the remaining bytes and release the cached reference while the first thread still holds only the raw local pointer: CPU 0 CPU 1 sk_redir = psock->sk_redir apply_bytes remains nonzero release_sock(sk) lock_sock(sk) apply_bytes reaches zero psock->sk_redir = NULL release_sock(sk) tcp_bpf_sendmsg_redir(sk_redir) sock_put(sk_redir) tcp_bpf_sendmsg_redir(sk_redir) The final sock_put() can free sk_redir before CPU 0 dereferences it. KASAN reported: BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020 Read of size 8 at addr ffff888108537090 by task poc/87 Call Trace: tcp_bpf_sendmsg_redir+0xf39/0x1020 tcp_bpf_sendmsg+0x977/0x1a50 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 85: sk_prot_alloc+0x56/0x210 sk_clone+0x6f/0x14b0 inet_csk_clone_lock+0x24/0x740 tcp_create_openreq_child+0x25/0x2710 tcp_v4_syn_recv_sock+0x10a/0xe00 Freed by task 0: __kasan_slab_free+0x43/0x70 slab_free_after_rcu_debug+0xa6/0x1e0 rcu_core+0x50a/0x1850 Last potentially related work creation: __sk_destruct+0x3da/0x540 sk_psock_destroy+0x81e/0xab0 process_one_work+0x63a/0x1070 Take a temporary socket reference while the source socket lock still protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir() returns. This keeps each unlocked use independent of cached-verdict ownership.

Joomla Extension - fabrikar.com - Unauthenticated stored XSS in Fabrik < 4.7.2 - The handling of user supplied input in the jsactions feature leads to an stored XSS vector.

Joomla Extension - fabrikar.com - Unauthenticated database table list and table-prefix disclosure in Fabrik < 4.7.2 - The ajax_tables method of the elements model allows listings of arbitrary database tables including columns.

Joomla Extension - fabrikar.com - Unauthenticated arbitrary directory listing via onAjax_getFolders in Fabrik < 4.7.2 - The onAjax_getFolders method of the elements model allows arbitrary directory listings.

Joomla Extension - fabrikar.com - Unauthenticated arbitrary file upload to web root via list email plugin in Fabrik < 4.7.2 - The list email plugin controller allows to upload non-executable files to the webroot.

Joomla Extension - fabrikar.com - Unauthenticated table truncation via list.doempty in Fabrik < 4.7.2- The list controllers doemtpy endpoints lacks ACL gates, a plain GET empties the target list's table

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: zero shared page before exposing to userspace bnxt_re_alloc_ucontext() allocates uctx->shpg via __get_free_page(GFP_KERNEL). The buddy allocator does not zero pages without __GFP_ZERO, so the page contains stale kernel data from whatever object most recently freed it. The page is then mapped into userspace via vm_insert_page() under BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes 4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed to userspace unsanitised, leaking kernel memory contents. Any user with access to /dev/infiniband/uverbsX on a host with a bnxt_re device (typically rdma group membership) can read this data via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT. Other shared pages in the same file already use get_zeroed_page() correctly: drivers/infiniband/hw/bnxt_re/ib_verbs.c srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL); cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL); uctx->shpg is the only outlier. Bring it in line with the existing convention by switching to get_zeroed_page().

hashcat fails to restrict command-line options when parsing restore files, allowing attackers to inject output-redirecting options like --outfile and --potfile-path. Attackers can craft restore files with malicious options to append attacker-controlled content to arbitrary files, enabling code execution when targeting shell startup files.

NLTK versions before 3.9.4 contain an unbounded recursion vulnerability in JSONTaggedDecoder.decode_obj() that allows attackers to cause denial of service by supplying deeply nested JSON structures. Attackers can craft JSON payloads exceeding the recursion limit to trigger an unhandled RecursionError that crashes the Python process.

NLTK before 3.10.0 contains an arbitrary local file read vulnerability in StreamBackedCorpusView that bypasses pathsec.ENFORCE by calling builtins.open() directly instead of pathsec.open(). Attackers who control the fileid argument can read arbitrary local files regardless of the ENFORCE setting, including sensitive system files and application credentials.

NLTK versions before 3.10.0 default to ENFORCE=False in pathsec.py, causing all security validation functions to emit warnings instead of raising exceptions. Attackers can bypass path traversal and pickle deserialization protections by exploiting the disabled security controls that are only active when manually enabled.

NLTK versions before 3.10.2 contain a symlink-based sandbox bypass in FramenetCorpusReader that allows attackers to read arbitrary XML files outside the corpus root. Attackers can place symlinks with names containing no path separators inside the corpus subdirectory, which pass the path validation guard and are resolved to files outside the intended corpus root when accessed via frame_by_name(), _lu_file(), or doc() methods.

NLTK before 3.10.3 contains a remote code execution vulnerability in AllowlistUnpickler that validates only the pickle module string and not the global name, allowing attackers to resolve dotted names by attribute traversal to callables outside the allowlisted namespace. Attackers can craft untrusted transition-parser models that execute arbitrary commands when TransitionParser.parse loads the model through allowlisted_pickle_load.

The Advanced Product Fields (Product Addons) for WooCommerce plugin for WordPress is vulnerable to Improper Input Validation in all versions up to, and including, 1.6.21. This is due to a logic flaw in the 'validate_cart_data' function. This makes it possible for unauthenticated attackers to bypass required paid addons and complete purchases at the base product price only, effectively stealing products by paying a fraction of the intended total. The vulnerability was partially patched in version 1.6.19.

Netty (io.netty:netty-codec-socks) versions 4.2.0.Final through 4.2.16.Final and 4.1.x through 4.1.136.Final contain null byte, CRLF, and credential injection vulnerabilities in the SOCKS4 (Socks4ClientEncoder) and SOCKS5 (Socks5ClientEncoder) client encoders, which fail to validate domain address and authentication (username/password) fields. An attacker able to control these fields can inject null bytes or CRLF characters to truncate or alter values, potentially enabling domain spoofing, SOCKS4 userid truncation, authentication data injection, and protocol confusion. Fixed in 4.2.17.Final and 4.1.137.Final.

Netty (io.netty:netty-handler) versions from 4.2.0.Final through 4.2.16.Final and versions through 4.1.136.Final disable TLS hostname verification on the SslProvider.OPENSSL client path when a plain (non-extended) X509TrustManager is used and Unsafe-based trust-manager wrapping is unavailable (Java 25+). In this configuration the OpenSSL client does not perform hostname verification, allowing a man-in-the-middle attacker to present a certificate issued for a different hostname that is accepted without validation. Fixed in 4.2.17.Final and 4.1.137.Final.

SiYuan versions before v3.7.4 contain an arbitrary file deletion vulnerability in the /api/search/removeTemplate endpoint that accepts an unvalidated path parameter passed directly to os.RemoveAll. Authenticated admin attackers can supply absolute filesystem paths to recursively delete any file or directory the kernel process has permission to remove, anywhere on the host filesystem.

AVideo through commit 9c39d8c8 contains an authentication bypass vulnerability where deduplicateByEncoderQueueId() returns video_id_hash credentials for any video by encoder_queue_id without ownership verification, and useVideoHashOrLogin() converts this hash into passwordless login as the video owner. Attackers with upload permission can retrieve an administrator's video_id_hash by omitting the videos_id parameter, then use that hash in an unauthenticated request to gain administrative session access and modify system configuration.

WWBN AVideo through commit 9c39d8c8 contains an authorization bypass vulnerability where getToken() creates tokens without binding to user identity or purpose, and plugin/Gallery/view/sections.php issues valid tokens to unauthenticated visitors. Attackers can retrieve a token from the Gallery endpoint and use it to bypass authorization checks in other subsystems like view/hls.php to access restricted video content.

WWBN AVideo through commit 9c39d8c8 contains a cross-site request forgery vulnerability in the releaseVideoNow.json.php endpoint that lacks authenticity checks and accepts GET requests. Attackers can craft a malicious cross-site GET request carrying an administrator's session cookie to permanently publish any embargoed video by manipulating the videos_id parameter.

better-npm-audit through 3.11.0, and the 4.0.0-rc.2 prerelease, builds its npm audit command by interpolating the user-supplied --registry option into a command string in src/handlers/handleInput.ts without validation or quoting, then passes that string to child_process.exec() in index.ts, which spawns a shell. A registry value containing shell metacharacters such as a semicolon, pipe, or command substitution executes arbitrary operating system commands with the privileges of the process running the audit.

Joomla Extension - joomgalleryfriends.net - Stored XSS in JoomGallery < 4.4.0 - An authenticated, privileged can store an XSS payload in any image causing JS execution in every visitor's browser.

A vulnerability was found in TRENDnet TEW-821DAP 2.2.01b05. Affected is an unknown function of the file /cgi-bin/upload.cgi of the component ssi. Performing a manipulation of the argument filename results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used.

The Firebase Authentication WordPress plugin before 1.7.1 does not require the email address in an authentication token to be verified before matching it to a WordPress account and issuing a session, allowing unauthenticated attackers to log in as any user, including administrators.