CVE Database

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values.

In the Linux kernel, the following vulnerability has been resolved: xsk: require at least 16 bytes of TX metadata AF_XDP accepts a TX metadata length as small as eight bytes, but every supported request needs the flags plus at least one eight-byte request field. Such short metadata also lets the kernel read beyond the registered area. Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve compatibility with applications that do not use launch-time metadata.

In the Linux kernel, the following vulnerability has been resolved: xsk: validate launch-time metadata size Launch-time metadata extends beyond the first 16 bytes of struct xsk_tx_metadata. Reject the request when the registered metadata area does not contain the complete field. Snapshot the validated flags for the generic transmit path and use that snapshot for request and completion processing, avoiding inconsistent decisions if user space changes the flags concurrently. Note that only xsk_skb_metadata is properly using the flags, __xsk_buff_get_metadata ignores them. Next commits address that.

In the Linux kernel, the following vulnerability has been resolved: xsk: validate metadata when processing requests The zero-copy path validates TX metadata while obtaining the descriptor context, then reads it again later when preparing the hardware request. User space can change the metadata between those operations and bypass the original validation. Validate the metadata in xsk_tx_metadata_request() and use the resulting flags snapshot for every feature check. Read request fields once so all zero-copy drivers process only values observed after successful validation.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter The sch_cake ACK filter parses packets to find the TCP header and filter duplicated ACKs if the flow is backlogged. The parsing code contains a WARN_ON(1) which can be triggered by a malformed IP header in certain cases. Depending on the system configuration, this leads either to either spamming dmesg with warnings, or a panic if panic_on_warn is set. The code already correctly skips the offending packet in the branch that triggers the warning, so the WARN_ON itself doesn't really serve any purpose. So just drop it altogether to avoid the inconvenient side effects.

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Validate T10 PI scatterlist counts When T10 PI is negotiated, vhost-scsi splits protection bytes from the data iterator before mapping the request scatterlists. A malformed request can claim protection bytes that cover or exceed the full payload length. The former leaves no data bytes to map, while the latter underflows exp_data_len before advancing the iterator. Both cases can let a zero data SGL count reach sg_alloc_table_chained(), which triggers BUG_ON(!nents). Reject protection lengths that cover or exceed the payload before subtracting prot_bytes and advancing the iterator. Also propagate negative errors from the protection SGL calculation before calling the allocator, matching the data SGL path.

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward.

In the Linux kernel, the following vulnerability has been resolved: net/openvswitch: check Ethernet header length in key_extract() When a packet arrives on an ARPHRD_NONE device (e.g. TUN), ovs_flow_key_extract() trusts the user-provided skb->protocol field: if it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes for MAC addresses and parse_ethertype() pulls 2 more, either of which triggers a kernel BUG in __skb_pull() when the linear area is too small. kernel BUG at include/linux/skbuff.h:2848! RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933 ovs_flow_key_extract+0x419/0xa70 ovs_vport_receive+0x222/0x390 netdev_frame_hook+0x3e0/0x630 tun_get_user+0x2d0c/0x38e0 Fixed by calling check_header() in key_extract() before accessing the Ethernet header.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers Another challenge with unlocked filters. There is a short window in tc_new_tfilter where a tcf_proto can be found and briefly referenced by a totally unrelated, unlocked classifier's request and cause a race. Feng created a poc which created this race with two threads, one creating a u32 filter and other a flower filter in the same chain/prio: 1. Both threads enter tc_new_tfilter, both find the chain empty, both drop filter_chain_lock 2. u32 finishes tcf_proto_create("u32") first, calls tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain 3. flower finishes tcf_proto_create("flower") later, calls tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp already there, takes a reference on it, destroys flower's own tp_new and returns u32_tp to the caller. Flower then hits the kind mismatch check (because it requested for kind "flower" but tp->ops->kind is "u32") and goes through the errout path which calls tcf_proto_put() on u32_tp. If the u32 thread has already gone through its own errout (its change() call failed on the PoC's empty options) and dropped its create and insert refs, flower's put is the last one and drops u32_tp's refcnt to zero. At this point tp->ops->destroy() runs in a context that never took rtnl_lock. When that happens, it might cause a UAF like the following (illustrated by the PoC): [ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393) [ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524 Call Trace: u32_init (net/sched/cls_u32.c:393) tc_new_tfilter (net/sched/cls_api.c:2378) Allocated by task 526: u32_init (net/sched/cls_u32.c:378) tc_new_tfilter (net/sched/cls_api.c:2378) Freed by task 522: kfree u32_destroy (net/sched/cls_u32.c:662) tcf_proto_destroy (net/sched/cls_api.c:446) tcf_proto_put (net/sched/cls_api.c:459) tc_new_tfilter (net/sched/cls_api.c:2459) Fix this by having tcf_proto_destroy() take rtnl_lock around tp->ops->destroy() for locked classifiers whenever rtnl is not held. To explain why I used a temp variable "not_lockless" I'd like to point to a semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here for future cleanup if deemed necessary): The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are redundant sources of truth for whether rtnl_lock is held. Among the nine classifier destroy(..rtnl_held..) callbacks, only flower consults the rtnl_held parameter which it propagates to tc_setup_cb_destroy() and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic, fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy() (u32, bpf, mall) hardcode true always instead of forwarding the parameter. A future cleanup should remove the rtnl_held parameter from the destroy callback signature entirely and have callers rely solely on their knowledge whether they are running in an unlocked context.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix TFO max_qlen accounting across reuseport migration A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through far more pending Fast Open requests than it was configured for. This only shows up with SO_REUSEPORT listener migration, where closing a listener hands its still-pending TFO children over to a surviving one. fastopenq.qlen is charged in tcp_fastopen_create_child() when the child is created and uncharged in reqsk_fastopen_remove() when the handshake completes. The uncharge follows rsk_listener of the request the child points at, and inet_reqsk_clone() has repointed the child at a new request owned by the new listener, so the ++ and the -- land on two different sockets. The new listener's qlen drifts negative and its limit no longer binds. Charge the new listener during migration, like reqsk_queue_migrated() already does for queue->young and queue->qlen.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix TOCTOU race between smc_listen_out() and listener close smc_listen_out() reads lsmc->sk.sk_state without the listener lock, then acquires lock_sock_nested() only after the check passes. This opens a window where smc_close_active() can transition the listener to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept queue, and release the lock, all between the lockless read and the delayed lock acquisition: smc_listen_work (smc_hs_wq) smc_close_active() ------------------------------- ------------------------- release_sock(child) if (sk_state == SMC_LISTEN) TRUE lock_sock(listener) sk_state = SMC_CLOSED smc_close_cleanup_listen() release_sock(listener) flush_work(tcp_listen_work) lock_sock_nested(listener) smc_accept_enqueue(listener, child) /* child enqueued on dead listener */ smc_close_active() flushes only tcp_listen_work. Work items already dispatched onto smc_hs_wq for the CLC handshake continue running unguarded. smc_accept_enqueue() takes a sock_hold() on the child that is never released, so the child smc_sock, its clcsock, and the reference all leak. A remote peer that opens TCP connections while the server calls close() can exhaust kernel memory. Move lock_sock_nested() to before the sk_state check so that the test and the enqueue are atomic under the listener lock.

In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Tear down DMA paths before stopping the rings tbnet_tear_down() stops both rings and frees their frame buffers before calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's descriptor base and tbnet_free_buffers() unmaps and frees the pages the frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's 'pending' bit, anything still in flight has nowhere to drain to. The teardown sequence has been in this order since the driver was added. The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable DMA paths only after rings are enabled") moved the path enable to the end of tbnet_connected_work() and documented why: /* Both logins successful so enable the rings, high-speed DMA * paths and start the network device queue. * * Note we enable the DMA paths last to make sure we have primed * the Rx ring before any incoming packets are allowed to * arrive. */ Teardown was never updated to match, so the rings and the paths now come down in the same order they go up instead of in reverse. On an ASMedia ASM4242 host router the 'pending' bit then never clears: every teardown burns the full 500 ms timeout and __tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to 5 s does not help, so the hop is not slow to drain, it never drains at all. The failure is invisible above the thunderbolt core. __tb_path_deactivate_hops() is void and only calls tb_port_warn(); tb_path_deactivate(), tb_tunnel_deactivate() and __tb_disconnect_xdomain_paths() are void as well, and tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So tb_xdomain_disable_paths() reports success and the netdev_warn() below it never fires. Repeated teardowns eventually take the XDomain control channel down, after which the peer node is gone and only a power cycle brings the controller back. Deactivating the paths first fixes it. Measured with kretprobes on a stock v6.17 tree with no other patches applied, on a link that was up and had just carried traffic: before: __tb_path_deactivate_hop() returns 0 for the first hop, then -ETIMEDOUT for the second 500335 us later after: 0 for both, 525 us apart Alternating the two orderings ABBA over three load levels, four teardowns per arm: every teardown failed before the change (21 of 21 that ran), none failed after (0 of 24). The before arms ran short because the link died partway through. The same split shows up when the interface is enslaved to a bond instead of just brought down, which is how I ran into this in the first place. Throughput and latency after the change are unchanged. Hosts whose routers drain the hop despite the stale descriptor base see no functional difference, since the paths end up deactivated either way.

In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures.

In the Linux kernel, the following vulnerability has been resolved: net/atm: fix slab-out-of-bounds read in vcc_setsockopt() vcc_setsockopt() contained an ineffective optlen check: if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname)) return -EINVAL; If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller passed a mismatched level), the length check optlen != __SO_SIZE(optname) was short-circuited and bypassed. Execution then fell through to switch(optname), calling copy_from_sockptr() assuming optval contained sufficient space. Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(), this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the expected structure size. Fix this by using copy_safe_from_sockptr(), which unconditionally validates that optlen is at least the expected size before copying. Also change the local 'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches its sizeof(int) ABI encoding on 64-bit systems.

In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer.

In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit().

In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup() When the interface has NETIF_F_SG enabled and skb_linearize() fails in ax88179_tx_fixup(), the function returns NULL without freeing the skb. usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop (info->flags does not set FLAG_MULTI_PACKET for this driver), jumping to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`. Because tx_fixup() returned NULL, the local skb variable in usbnet_start_xmit() is NULL, so the original skb is never freed — a memory leak on every TX frame whose linearization fails (i.e. under memory pressure). Free the skb before returning, matching the error handling already used for the pskb_expand_head() failure path in the same function.

In the Linux kernel, the following vulnerability has been resolved: vt: stabilize tty reference in kbd_keycode with tty_port_tty_get kbd_keycode() reads vc->port.tty without acquiring a tty reference, racing against con_shutdown() which clears port.tty under a different lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference for the duration the tty pointer is needed.

In the Linux kernel, the following vulnerability has been resolved: mm: fix incorrect flush address in direct page table reclaim When zap_pte_range reclaims a page table, it does: pte_free_tlb(tlb, pmd_pgtable(pmdval), addr); and this is unconditionally wrong: if this code executes, addr *always* points one past the end of the range covered by the table. The addr parameter is used to flush the TLB (really the paging-structure-cache) to drop references to the to-be-freed table, and any architecture that cares about the parameter will flush the wrong address. (But they'll still free the correct page). I think it's worth contemplating why the kernel works at all. If we hit the offending line of code, we will first clear the PMD entry (line 1954, zap_empty_pte_table), then we will issue pending flushes if force_flush is set (tlb_flush_mmu_tlbonly(tlb)), then we will skip the retry on line 1979 (phew!), and then we will do the offending pte_free_tlb call. *Or* we will clear the PMD entry immediately before pte_free_tlb (line 1983, zap_pte_table_if_empty). If we have any pending flushes (i.e. we actually zapped any last-level entries) at the time we clear the PMD entry, then the flush really ought to flush all references to the table (Linus certainly seems to think it will on all architectures [0]). The condition under which we have no accumulated flushes at the time of the clear is very complex (the whole zap_pte_range function has absurdly complex control flow). If we do hit the bad case, then we will end up clearing the PMD entry after the last time the range is flushed, and any CPU is free to cache a reference to the (empty) page table. If this happens due to an ordinary read or write, it would segfault, so it would be rare. But the cache could be speculatively filled as well. Then we'll flush the wrong address and then free and possibly reuse the table. On x86, even flushing the wrong address works on non-KPTI Intel systems because INVLPG flushes *all* paging-structure-caches, not just the ones for the target address. But INVPCID does not, and flush_tlb_one_user will use INVPCID if it's available. And then we're toast. AMD systems are more susceptible: we set the EFER.TCE bit, which makes even INVLPG only flush the target address. I think this might fix an issue in ripgrep reported here: https://github.com/BurntSushi/ripgrep/issues/3494 [0] https://lore.kernel.org/all/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com/T/#u

In the Linux kernel, the following vulnerability has been resolved: ipvs: stop estimator after disabled calc phase IPVS estimator kthread 0 starts with zeroed chain and tick limits until its initial calculation phase completes. If network namespace teardown clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return without installing positive limits. The kthread can then continue into its main loop and drain est_temp_list with zero chain_max, tick_max and est_max_count values. Each enqueue consumes one available tick row, but est_count never reaches the zero est_max_count value. After all rows are consumed, the row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes past the ticks and tick_len arrays. Exit kthread 0 after the calculation phase if the kthread is stopping or IPVS has been disabled. That keeps temporary estimators from being drained after the limits failed to initialize. Estimator kthreads can now self-exit before teardown or reload stops kd->task. Keep an extra task reference after creation and release it with kthread_stop_put(), so kd->task remains valid until the stop paths consume that reference.

In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in TX_RING send path tpacket_snd() reads dev->hard_header_len independently for skb allocation and header construction in tpacket_fill_skb(). Concurrent netdevice reconfiguration can therefore make the reserved headroom smaller than the amount later pushed, or make copylen - hard_header_len negative. Snapshot hard_header_len once before processing ring frames and use it for the frame limit, headroom allocation, copy length, and skb construction. Pass the snapshot to tpacket_fill_skb(). The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here.

In the Linux kernel, the following vulnerability has been resolved: net/packet: reset the MAC header on the packet-socket transmit path packet_parse_headers() resets the MAC header only for a SOCK_RAW frame whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket, any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave skb->mac_header unset here. For frames sent via __dev_queue_xmit() this is harmless: it resets the MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS path uses dev_direct_xmit(), which does not, so the frame reaches ndo_start_xmit() with the MAC header unset. A driver that reads eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an out-of-bounds access ~64 KiB past the head -- the same class fixed for one consumer in commit f5089008f90c ("macsec: do not read an unset MAC header in macsec_encrypt()"). packet_parse_headers() runs only on the transmit path, where skb->data points at the start of the L2 header for every packet-socket type regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC header unconditionally, mirroring __dev_queue_xmit(), so the frame is anchored on the bypass path too. Found by 0sec (https://0sec.ai) using automated source analysis; verified against source and matched to the macsec KASAN report in f5089008f90c. Compile-tested.

In the Linux kernel, the following vulnerability has been resolved: packet: synchronize pressure clearing with ring reconfiguration packet_set_ring() updates the RX ring state under sk_receive_queue.lock, but used to publish the tpacket receive mode through po->prot_hook.func after releasing that lock. packet_poll() and packet_recvmsg() can then run the pressure clearing path after the ring has been cleared while still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference stale or NULL ring storage. Move the existing receive hook assignment into the same sk_receive_queue.lock section as the ring state update. Keep the assignment otherwise unchanged, including on TX ring reconfiguration, to avoid adding behavior changes that are not required for the fix. Serialize packet_recvmsg() pressure clearing with the same queue lock only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear and the socket has moved away from tpacket_rcv, packet_set_ring() has already detached the socket and waited for synchronize_net(), so no new packet input can set the flag again. packet_poll() already holds sk_receive_queue.lock, so it uses the new unlocked helper directly.

In the Linux kernel, the following vulnerability has been resolved: net/sched: reject overly deep qdisc hierarchies Deep qdisc hierarchies can lead to excessive recursion in qdisc tree walkers and exhaust the kernel stack. The existing loop check does not cover the create-and-graft path, so a hierarchy can still be extended by creating a new child qdisc below an already deep parent. Store the hierarchy depth in struct Qdisc and update it when qdiscs are grafted. Reject new child qdiscs once the parent is already at the maximum allowed depth.

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix netdev use-after-free in beacon worker mac802154_beacon_worker() reads local->beacon_req under RCU and derives the sub-interface from the request, but then drops the RCU read lock and continues to use both sdata and the embedded wpan_dev. mac802154_stop_beacons_locked() cancels only pending beacon work, clears local->beacon_req and frees the request. A beacon worker that is already running can therefore continue after interface teardown and dereference the freed netdev private area. The scan worker already pins the netdev before leaving RCU. Apply the same lifetime rule to the beacon worker: take a netdev reference while the request is still protected by RCU, and release it on all paths that continue after the reference is acquired.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu Read of size 8 at addr ff110001052e6210 by task poc/92 Call Trace: instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log] nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log] nf_log_packet+0x204/0x300 ebt_nflog_tg+0x351/0x550 ebt_do_table+0xedf/0x22b0 Allocated by task 90: __kmalloc_noprof+0x186/0x470 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 register_pernet_subsys+0x23/0x40 Freed by task 93: kfree+0x131/0x3c0 ops_undo_list+0x3e3/0x700 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 nfnetlink_log_fini+0x34/0x450 [nfnetlink_log] Acquire the ULOG logger module reference when an ebt_nflog rule is validated and release it when the rule is destroyed. Request the NFLOG backend for legacy callers when needed, matching xt_NFLOG. This prevents module teardown until all ebt_nflog rules have stopped using the logger.

In the Linux kernel, the following vulnerability has been resolved: ipv4: fix use-after-free in fib_nhc_update_mtu() fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but RTNL does not serialize this walk with PMTU exception updates. The walk uses rcu_dereference_protected() with a constant true condition without holding fnhe_lock. The following interleaving can therefore occur: CPU 0 CPU 1 fib_nhc_update_mtu() update_or_create_fnhe() load fnhe spin_lock_bh(&fnhe_lock) fnhe_remove_oldest() unlink fnhe kfree_rcu(fnhe, rcu) <quiescent state> access fnhe after grace period KASAN reported: BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410 Read of size 8 at addr ffff888107d49000 by task poc/90 Call Trace: fib_nhc_update_mtu+0x3df/0x410 fib_sync_mtu+0x7a/0xd0 fib_netdev_event+0x229/0x3f0 netif_set_mtu_ext+0x33a/0x570 dev_set_mtu+0x88/0x120 The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a pair and other writers serialize them with fnhe_lock. RCU alone prevents reclamation, but would still allow concurrent writers to leave a mixed pair. Walk the table under RCU and acquire fnhe_lock only while updating each exception. RCU keeps the current entry alive while the short critical section serializes its paired PMTU fields. This avoids holding the global lock while scanning all 2048 buckets for every nexthop.

In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1.