CVE Database

Improper protection against voltage and clock glitches vulnerability in Microchip SAMA5D4 allows Hardware Fault Injection. This issue affects SAMA5D4.

The use of hard-coded cryptographic key vulnerability has been identified in the mesh functionality of Deco XE75 v3, XE5300 v3.6 and WE10800 v3.6.  A shared RSA-512 mesh group private key is present in the affected firmware and is used by the mesh protocol for node authentication.  An attacker who obtains the firmware image and has local network access may be able to authenticate as a mesh node without possessing a device-specific credential. Successful exploitation may allow an unauthenticated adjacent attacker to impersonate a trusted mesh node and bypass mesh node authentication, which may permit unauthorized changes to device or mesh configuration, affecting confidentiality, integrity and availability.

Use-After-Free vulnerability in a zircon kernel pager proxy (Fuchsia), which could lead to a Privilege Escalation from Userspace to Kernel (AP)

Craft CMS versions from 4.0.0-RC1 before 4.18.2 and from 5.0.0-RC1 before 5.10.6 contain an authenticated remote code execution vulnerability in control panel element-search condition handling. A JSON cleanse bypass in condition.config allows Yii behavior/event configuration keys to be interpreted after decoding, enabling command execution as the PHP/web user.

A server-side request forgery (SSRF) vulnerability was found in multiple AWX notification backends. The webhook, Mattermost, Rocket.Chat, and Grafana notification backends use notification template URLs as direct HTTP request targets without validating the target address against private, loopback, or reserved IP ranges. An organization notification administrator can create notification templates pointing to internal or loopback addresses, causing the AWX control node to issue HTTP requests to services that are not externally accessible. Additionally, the webhook notification backend follows HTTP redirects and resends configured Basic Authentication credentials to redirect targets regardless of host change, allowing an attacker to exfiltrate notification credentials by redirecting to an attacker-controlled host. The Grafana backend sends its API key in the Authorization header to the configured target URL.

A path traversal vulnerability was found in AWX's project archive extraction. The project_archive action plugin extracts zip and tar archive members by joining the project directory path with the member filename without performing path normalization, boundary validation, or rejecting directory traversal sequences. A malicious archive containing members with path traversal components can write files to arbitrary locations on the execution node's filesystem outside the intended project directory. An attacker who controls the archive content, either through a compromised upstream source, a malicious archive URL, or a man-in-the-middle attack on a plain HTTP connection, can achieve arbitrary file writes as the user performing the extraction, potentially leading to remote code execution through mechanisms such as cron files, SSH authorized keys, or playbook content injection.

HCL Hive is affected by a use of vulnerable third-party components which could allow an attacker unauthorized access or compromise of the system by exploiting publicly documented security flaws.

The Zephyr virtio driver does not validate the descriptor-chain head id that the virtio device writes into the used ring. In virtio_isr() (drivers/virtio/virtio_common.c), the device-written vq->used->ring[idx].id is used directly as an index into vq->recv_cbs[] and vq->desc[], which are both allocated with exactly vq->num entries. recv_cbs[] holds {cb, opaque} callback entries, and the indexed callback pointer is then invoked as cbe.cb(cbe.opaque, used_len). Because the id is consumed as a 16-bit value with no bound check, a malicious or compromised virtio backend (an untrusted hypervisor, or an untrusted hardware/peer-processor virtio device on a PCI or MMIO transport) can supply an id far beyond vq->num. This causes an out-of-bounds read of a {function pointer, argument} pair from heap memory beyond recv_cbs[], after which the driver calls that attacker-shaped pointer in the guest's interrupt context. No guest privileges or user interaction are required; the backend triggers it by writing the shared used ring and raising the queue interrupt. The result is an arbitrary / attacker-influenced function-pointer call in the Zephyr guest, i.e. a control-flow-hijack primitive that can lead to code execution or, at minimum, a reliable crash. The fix rejects any used-ring id >= vq->num before indexing recv_cbs[]/desc[] or invoking the callback. This affects builds using CONFIG_VIRTIO with the PCI or MMIO transport.

Potential security vulnerabilities have been identified in HP Easy Start for macOS, versions prior to 2.16.7.260722. These potential vulnerabilities may lead to escalation of privilege. HP is releasing updates to mitigate these potential vulnerabilities.

Potential security vulnerabilities have been identified in HP Easy Start for macOS, versions prior to 2.16.7.260722. These potential vulnerabilities may lead to escalation of privilege. HP is releasing updates to mitigate these potential vulnerabilities.

Potential security vulnerabilities have been identified in HP Easy Start for macOS, versions prior to 2.16.7.260722. These potential vulnerabilities may lead to escalation of privilege. HP is releasing updates to mitigate these potential vulnerabilities.

HCL Hive is affected by incorrect default permissions which could allow an attacker unauthorized lateral movement, container breakout, and interception of sensitive internal communications.

Cross-site scripting in the Web Administration interface of Network Optix Nx Witness VMS before version 6.1.3 on Linux, Windows and MacOS allows an adjacent-network attacker to execute arbitrary JavaScript in the browser of an authenticated administrator and steal the administrator's session token, resulting in Administrator Account Takeover. An attacker who controls an Nx server on the same network segment can set that server's site name to a script payload, which executes when an administrator opens the "Merge with Another Site" dialog and the site selection list is displayed.Solution: Update to Nx Witness VMS version 6.1.3 or later.

RansomLook contains a stored cross-site scripting (XSS) vulnerability in the cryptocurrency wallet detail view. Cryptocurrency addresses and blockchain names originating from external sources, including the public crowd-sourced ransomwhe.re feed, were stored without sufficient validation and later embedded directly into an inline JavaScript onclick handler. Although Jinja HTML autoescaping was applied, it does not provide adequate protection when untrusted data is inserted into a JavaScript string inside an HTML attribute. HTML entities such as ' are decoded by the browser's HTML parser before the resulting attribute is interpreted as JavaScript. Consequently, a specially crafted cryptocurrency address containing quote characters and JavaScript syntax could escape the intended string literal and execute arbitrary JavaScript when a user clicked the affected wallet's CSV export button. Because cryptocurrency information imported from an untrusted upstream could reach the vulnerable rendering path, exploitation may not require an authenticated RansomLook account if an attacker can introduce a malicious wallet record into a consumed external data source. Successful exploitation could allow attacker-controlled JavaScript to execute in the security context of the RansomLook web application, potentially exposing information accessible to the victim or performing actions with the victim's privileges. The patch mitigates the issue by validating cryptocurrency addresses and blockchain identifiers before storage, restricting them to a safe character set, and replacing the inline JavaScript handler with data-* attributes and an external event listener so wallet values are treated strictly as data rather than executable JavaScript.

Improper Neutralization of Special Elements used in an OS Command in the package manager component of Black Duck blackduck-c-cpp before 3.0.7 allows an actor able to create a file within the scanned build directory to execute operating system commands as the account running the scan. Filesystem paths encountered while traversing the scanned directory are interpolated into command strings that are executed through a shell without quoting or escaping, so shell metacharacters within those paths are interpreted rather than treated as literal text. No control over the build command or the tool's configuration is required.

Invocation of Process Using Visible Sensitive Information in Black Duck blackduck-c-cpp 1.0.17 through 3.0.6 allows an actor able to execute code within the scanned project's build to obtain the Black Duck API token via the ambient process environment, which is inherited by subprocesses launched during build capture and signature scanning. This applies only where the token is supplied through the BLACKDUCK_API_TOKEN or BD_HUB_TOKEN environment variable. Upgrading does not remediate prior disclosure; any token supplied to an affected version through an environment variable should be rotated.

TIM Flow before 26.0.6 contains a CRLF injection vulnerability that allows remote attackers to inject arbitrary HTTP headers and response body content by embedding unsanitized carriage return and line feed sequences in the rt URL parameter, which is reflected into Set-Cookie response headers. Attackers can craft malicious requests to induce authenticated users to execute arbitrary JavaScript in their browser context, enabling session token theft and account credential modification.

RansomLook exposed sensitive operator-side scraping configuration through multiple unauthenticated API responses. Location records associated with ransomware groups and markets were returned largely verbatim to unauthenticated callers whenever the location itself was not marked as private. These records could contain internal fields such as header, which may include authentication headers, session cookies, or other credentials used to access monitored websites; init_script, which may contain logic used to bypass CAPTCHA, anti-bot protections, or paywalls; and browser, which discloses details about the scraping environment. An unauthenticated remote attacker could query the affected API endpoints and obtain these values. Leaked authentication material could potentially be replayed against the monitored service, while disclosure of scraping and bypass logic could allow site operators or other attackers to identify and defeat RansomLook's collection mechanisms. The patch introduces an explicit allowlist of fields permitted in public location records and strips all operator-side fields before returning data to unauthenticated users. The accompanying change from <string:postname> to <path:postname> appears to be a functional correction allowing legitimate post titles containing / and does not, based on this patch alone, represent the security issue.

RansomLook contains insufficient resource validation in the analysis PDF generation functionality. Analysis documents are converted from Markdown to HTML and passed to WeasyPrint for PDF rendering. Prior to the fix, WeasyPrint used its default URL fetcher, allowing resource references contained in an analysis to be resolved without restrictions. An authenticated attacker able to create or modify an analysis could embed crafted resource references using schemes such as file:// or http://. When the analysis was subsequently rendered as PDF, WeasyPrint would process these references with the privileges and network access of the RansomLook server. A malicious file:// reference could cause the renderer to access arbitrary files readable by the RansomLook process, potentially exposing sensitive configuration, credentials, or other local data through rendered resources. Network URLs could cause the server to initiate requests to localhost, internal network services, or external systems, resulting in server-side request forgery (SSRF) and potentially bypassing network-level access restrictions. The patch introduces a dedicated WeasyPrint URL fetcher that permits only data: resources, the RansomLook report logo, and files contained within the analysis asset directory. Network resources and filesystem paths outside these explicitly permitted locations are rejected.

RansomLook contains a path traversal vulnerability in the handling of the screen field associated with group posts. The GroupPost.get API handler concatenates the database-controlled screen value directly with the application's source/ directory and opens the resulting path without verifying that the resolved file remains within the intended directory. Because the screen field is free-form and can be populated either through the administrative post editor or through data imported from a remote RansomLook instance, a malicious upstream instance can provide traversal sequences such as ../config/generic.json. When the affected post is subsequently retrieved through the API, RansomLook resolves and reads the attacker-controlled path and returns the contents of the referenced file Base64-encoded in the API response. This can allow an attacker (being admin) controlling imported post data to read arbitrary files accessible to the RansomLook process, potentially exposing sensitive configuration data, API credentials, password hashes, or other application secrets. The attack does not require the malicious upstream to possess an account on the affected RansomLook instance. The vulnerability is addressed by resolving screen paths with os.path.realpath() and verifying that the resolved path remains beneath the application's source/ directory. Validation is performed both when values are written and immediately before files are read. Using canonical paths also prevents traversal through symbolic links that would bypass purely lexical path normalization checks.

RansomLook fails to enforce the privacy status of ransomware groups and markets when distributing newly collected victim posts to external notification channels. The post-processing logic checks whether an individual post is marked private but does not verify whether the group or market to which the post belongs is configured as private. As a result, newly parsed victim information associated with a private group or market may be automatically published through enabled Rocket.Chat, Mastodon, Bluesky, and e-mail notification channels despite the entity being explicitly configured to prevent public disclosure. A similar issue affects the public MISP feed. The feed previously determined privacy using groupinfo(), which only queries the group database. Consequently, victim information associated with private markets could be added to the public MISP feed because the corresponding market privacy flag was not evaluated. An attacker or other unauthorized party able to access these public notification channels or the MISP feed may obtain victim information that was intended to remain private. Depending on the collected data, this may disclose victim names, ransomware activity, incident information, or other information associated with privately monitored groups and markets. The fix introduces a common is_private_entity() check covering both groups and markets and prevents private entity posts from being distributed through external notification channels or the public MISP feed. Internal storage and dashboard alerting remain unaffected.

A flaw was found in WebKitGTK. Processing malicious web content can cause a use-after-free issue due to improper memory handling and result in memory corruption.

RansomLook contains a missing authentication vulnerability in the /admin/crypto/group/new endpoint. While the endpoint provides an administrative function for creating new crypto group entries, it was not protected by the application's authentication mechanism. An unauthenticated remote attacker able to access the RansomLook web interface could therefore submit requests to this endpoint and create crypto group entries without possessing a valid authenticated session or administrative credentials. Successful exploitation allows an attacker to make unauthorized modifications to data that should only be manageable by authenticated administrators. Depending on how crypto group information is subsequently consumed by RansomLook, malicious or fraudulent entries could also affect the integrity of information presented or processed by the application. The vulnerability is addressed by applying the flask_login.login_required decorator to the /admin/crypto/group/new route, ensuring that only authenticated users can access the functionality.

A vulnerability was found in RPM's rpmbuild tarball processing. When processing a crafted source archive, the getTarSpec() function in tools/rpmbuild.cc passes an attacker-controlled tar archive member name to rpmExpand() as part of a %{basename:...} macro expression. A specially crafted .spec member name can therefore inject RPM macros, including Lua expressions, resulting in arbitrary code execution with the privileges of the user running rpmbuild. This can be exploited when a victim or automated build system processes an attacker-controlled source tarball using rpmbuild tarball mode (such as -ts, -ta, or -tb).

A vulnerability was determined in SourceCodester Simple Online Food Ordering System 1.0. Impacted is an unknown function of the file /fos/admin/ajax.php?action=save_settings. This manipulation of the argument Name causes sql injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

act starts an HTTP Artifacts V4 backend whenever a workflow uses actions/upload-artifact@v4 or actions/download-artifact@v4. The control-plane RPCs of that backend, including CreateArtifact, GetSignedArtifactURL, ListArtifacts, FinalizeArtifact and DeleteArtifact, accept a caller-supplied workflow_run_backend_id and never check that it belongs to the requester: validateRunIDV4 in pkg/artifacts/artifacts_v4.go parses the value and returns it with the comparison against the requesting task's run ID left commented out. The signed URLs the backend issues are authenticated by an HMAC whose key is hardcoded to the four bytes 0xba 0xdb 0xee 0xf0, identical in every build, computed over a concatenation of endpoint, expiry, artifact name and task ID with no length prefix or delimiter, so signatures are both forgeable and ambiguous between differing artifact name and task ID pairs. The --artifact-server-addr flag defaults to the host's outbound address rather than loopback, leaving the backend reachable from the surrounding network. Any client that can reach it may read, overwrite or delete the artifacts of a concurrently running job with no credentials, exposing build outputs such as secrets and deployment credentials and permitting their replacement before the owning job consumes them.

webpack-dev-middleware resolves a request to a local file in getFilenameFromUrl by testing the request pathname against a traversal guard and then slicing it at a fixed character offset. The guard, UP_PATH_REGEXP applied to path.normalize(`./${pathname}`), only matches ".." that stands as a whole path segment, while the containment test is the string comparison pathname.startsWith(publicPathPathname) and the file path is built as path.join(outputPath, pathname.slice(publicPathPathname.length)). When the configured publicPath has no trailing slash, a request such as GET /assets../.env against publicPath /assets yields the pathname /assets../.env, whose only dot-dot sits inside the segment "assets.." and so passes the guard, but the offset slice cuts within that segment and hands "../.env" to path.join, resolving one directory above outputPath. Reading a file from that path requires the middleware to be backed by the physical filesystem, which happens when writeToDisk is true or a custom outputFileSystem is supplied, since the default memfs volume holds only build output. Traversal depth is limited to a single directory because a separately delimited dot-dot segment is collapsed during URL parsing before the guard runs. The default publicPath value of "auto" resolves to "/" and is not affected. This is an incomplete fix for CVE-2024-29180: the guard and offset slice were introduced by that fix and are present in every release from 5.3.4, 6.1.2 and 7.1.0 onward.

The official Flair wheels for 0.15.0 and 0.15.1 still contain flair/models/clustering.py, whose ClusteringModel.load static method returns pickle.loads(joblib.load(str(model_file))) and so executes arbitrary Python while loading a model file. Loading a model supplied by an attacker therefore runs that attacker's code with the privileges of the loading process. This is the same sink and the same file as CVE-2024-10073, which records 0.15.0 as the fixed version on the basis that clustering support was dropped in that release; the module was removed from the documented API but remains present in the distributed artifact and reachable by importing flair.models.clustering directly, so the earlier record's fixed version does not hold for the shipped package.

The Mercado Pago Node.js SDK interpolates caller-supplied identifiers into API request paths without percent-encoding them, so characters that are structural in a URL survive into the outgoing request. The payment (get, capture, cancel), paymentRefund (create, total, list, get), advancedPayment (get, capture, cancel, update, updateReleaseDate) and disbursementRefund (create, createAll, listAll) clients build their path as a template literal, for example RestClient.fetch(`/v1/payments/${id}`, ...) in src/clients/payment/get/index.ts. A dot-dot or slash sequence in the identifier is normalised by the WHATWG URL parser and redirects the request to a different endpoint, and a question mark appends attacker-chosen query parameters, in both cases carrying the merchant's own access token. An application that forwards an identifier influenced by an untrusted party into one of these methods without an ownership check therefore allows that party to reach other resources within the merchant's token scope. The repository already contains the intended helper, encodePathParam in src/utils/path.ts, which pull request 451 applied to roughly 29 other clients while leaving these unchanged.

Xinference loads models with Hugging Face remote code execution unconditionally enabled, and before version 2.12.0 exposes no setting to disable it. Six loader call sites pass trust_remote_code=True as a literal or as an unconditional default: RerankModel._get_tokenizer in xinference/model/rerank/core.py, SentenceTransformerRerankModel.load in xinference/model/rerank/sentence_transformers/core.py, SentenceTransformerEmbeddingModel.load in xinference/model/embedding/sentence_transformers/core.py, FlagEmbeddingModel.load in xinference/model/embedding/flag/core.py, and two sites in xinference/model/llm/transformers/core.py where PytorchModel._sanitize_model_config and PytorchModel._get_components default the value to True. Because a caller with model launch access can register a model whose type is unknown and supply an arbitrary model path, the server reaches _auto_detect_type and then AutoTokenizer.from_pretrained, which imports and executes Python declared by the model directory's own tokenizer_config.json auto_map, running attacker-supplied code with the privileges of the worker process. Version 2.12.0 gates every site behind allow_trust_remote_code and the XINFERENCE_TRUST_REMOTE_CODE setting, permitting remote code only for bundled built-in models.