CVE Database

Joomla Extension - joomlart.com - Open mail relay via contact AJAX endpoint in T4 Page Builder extension < 2.3.0 - The front-end JSON editor endpoint exposes an action called contact that requires no authentication, no CSRF token, no captcha (when no captcha plugin is enabled) and has no rate limiting. The attacker fully controls the recipient, subject and HTML body, and the mail is sent from the site's configured sender identity (mailfrom/fromname).

Joomla Extension - joomshaper.com - Unvalidated Email Destination & Form Manipulation in Booking Requests in SP Property < 4.1.4 - Booking inquiries previously relied on client-submitted hidden fields for recipient routing, allowing potential email manipulation.

Joomla Extension - joomshaper.com - Missing Access Control in Gallery Image Management in SP Property < 4.1.4 - The gallery management controller tasks lacked authorization checks and CSRF token validation.. Users could invoke file removal actions with arbitrary path strings or upload unverified file types.

The Redux Framework plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Slider field in User Profile settings in versions up to and including 4.5.13.1. This is due to insufficient input sanitization in the user_meta_save() function (which only sanitizes array values, not scalar values) and improper output escaping in the Redux_Slider::render() method, which outputs slider values into unquoted HTML attributes. The vulnerability also exploits the fact that the clean_default() method only casts values to numeric types when they are empty or out of bounds, allowing malicious strings like '1 tabindex=0 autofocus onfocus=alert(1) x=' to pass validation through PHP's loose type comparison. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts into their user profile that will execute whenever an Administrator navigates to view the attacker's profile page.

The Aruba HiSpeed Cache plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Post Content in all versions up to, and including, 3.0.14 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

GeoVision GV-LPC2211 V1.13 fails to restrict the filename supplied to BKDownloadLink.cgi, allowing a remote user with valid web credentials to read arbitrary files accessible to the root-run web service.

GeoVision GV-LPC2211 V1.13 fails to limit repeated User elements in ONVIF SetUser requests, allowing an authenticated administrator to overwrite stack control state and crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 fails to limit repeated User elements in ONVIF CreateUsers requests, allowing an authenticated administrator to overwrite stack control state and crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 fails to limit repeated Username elements in ONVIF DeleteUsers requests, allowing an authenticated administrator to overflow a stack array and crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 copies an oversized ONVIF SetUser password into a fixed stack field, allowing an authenticated administrator to crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 copies oversized ONVIF CreateUsers username or password values into fixed stack fields, allowing an authenticated administrator to crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 allows a Guest user to enter SSVR firmware-upgrade mode and disrupt live services before any firmware image is validated.

GeoVision GV-LPC2211 V1.13 allows a Guest user to retrieve persistent device configuration containing plaintext administrative and user credentials through SSVR.

GeoVision GV-LPC2211 V1.13 contains an authenticated stack buffer overflow in SSVR fragment reassembly that allows a valid user to crash the SSVR service.

A flaw was found in crun. After pivot_root, reopening /dev/null for stdio can follow a symlink and attach a host file to container stdio, then change that file's ownership. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet.

A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet.

An issue was discovered in Bosch Sensortec COINES_SDK versions 2.0 through 2.11.  The host streaming API function {{coines_read_stream_sensor_data()}} fails to validate the boundaries of the caller-provided destination buffer. Internally, the stream processing mechanism in {{comm_intf_process_stream_response()}} discards the requested {{number_of_samples}} argument and copies the entirety of the streaming ring buffer's accumulated data into {{coines_stream_rsp_buf}}. Subsequently, {{coines_read_stream_sensor_data()}} unconditionally executes a {{memcpy}} of the ring buffer size into the caller-provided buffer without verifying if the destination memory allocation is large enough. A malicious or compromised hardware board connected via USB or BLE can exploit this by streaming a high volume of sensor samples, causing a heap or stack-based buffer overflow on the host desktop environment. This can result in a Denial of Service (DoS) or potential arbitrary code execution on the host machine.

An out-of-bounds read vulnerability was discovered in the Bosch BME690 SensorAPI (C-driver) in version v1.0.3 and prior, specifically within the field data parsing logic in read_all_field_data (bme69x.c). The driver prefetches heater configuration registers into a contiguous 30-byte stack buffer (set_val) mapping IDAC, RES_HEAT, and GAS_WAIT tables. When parsing sensor field data, the gas_index is extracted using a 4-bit mask (0..15) but lacks boundary verification against the valid range (0..9). An attacker or a compromised peripheral mimicking a sensor on the I2C/SPI bus could return a payload with a gas index value of 10 or higher. This causes the driver to perform an out-of-bounds array access (set_val[20 + gas_index]), reading up to 6 bytes past the stack buffer. The leaked out-of-bounds byte is then written into the public gas_wait field, which may lead to measurement corruption or leak adjacent stack memory when telemetered or logged.

A flaw was found in the Device Authorization Grant flow of Keycloak, an identity and access management solution. The issue occurs because the token redemption process fails to check if a user account is currently locked due to brute-force protection. If an attacker has an active session for a locked account, they can complete the device login process and receive new security tokens. This allows the attacker to maintain access to the account even when it should be temporarily disabled to prevent unauthorized entry.

A flaw was found in the skupper-router component of Red Hat Service Interconnect, which is used to provide secure communication between distributed services. The issue occurs when the router processes a specially crafted network message using its AMQP field parser. Due to a lack of bounds on recursion during parsing, the router can run out of stack memory and crash, leading to a denial of service for the interconnected network.

An authorization bypass vulnerability exists in SHIRASAGI through a user-controlled key, which may allow an unauthorized attacker to retrieve files from the groupware's shared file feature.

A cross-site scripting vulnerability exists in SHIRASAGI, which may allow an attacker to execute an arbitrary script in the web browser of a user who accesses a website using the affected product.

The Notiqoo WordPress plugin before 1.4.14 does not have capability checks on several of its AJAX actions and builds the name of the option to write from user input, allowing users with a role as low as contributor to modify arbitrary WordPress options, which can be used to deactivate Notiqoo WordPress plugin before 1.4.14 and to lock every administrator out of the site.

A privilege escalation vulnerability in Palo Alto Networks Cortex XDR Broker VM enables an authenticated low privileged user with man-in-the-middle (MitM) access to execute code with root privileges on the Broker VM.

The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the bulk_action parameter in all versions up to, and including, 1.15.46 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

A command injection vulnerability in Palo Alto Networks PAN-OS® software enables an authenticated administrator to bypass system restrictions and run arbitrary commands as a root user. To be able to exploit this issue, the user must have access to the PAN-OS CLI and the device must be configured with a Luna Hardware Security Module (HSM). The security risk posed by this issue is significantly minimized when CLI access is restricted to a limited group of administrators. Panorama, Cloud NGFW, and Prisma® Access are not impacted by this vulnerability.

Multiple local privilege escalation vulnerabilities in the Palo Alto Networks GlobalProtect™ app allows a local user to escalate their privileges to NT AUTHORITY\SYSTEM on Windows and root on macOS and Linux. This enables a non-administrative user to execute arbitrary commands with administrative privileges. This GlobalProtect app on iOS, Android and ChromeOS is not impacted.

A vulnerability in the EndPoint Data Loss Prevention (DLP) enforcement of Palo Alto Networks Prisma® Access Agent enables a local user to bypass configured DLP policy enforcement controls and exfiltrate sensitive data. This Prisma Access Agent on macOS, Linux, iOS, Android and Chrome OS is not affected.

An information disclosure vulnerability in the Palo Alto Networks Prisma® Access Agent on Linux enables a local user to access sensitive configuration data and credentials. The Prisma Access Agent on macOS, Windows, iOS, Android and Chrome OS is not affected.

An authenticated client could attach a consumer with a selector containing crafted wildcard usage that results in excessive evaluation during message delivery attempts, occupying a shared broker thread and leading to denial of service. This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0. Users are recommended to upgrade to version 2.57.0, which fixes this issue.