CVE Database

An Access of Uninitialized Pointer vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved with BGP sharding configured allows an attacker triggering indirect next-hop updates, along with timing outside the attacker's control, to cause rpd to crash and restart, leading to a Denial of Service (DoS). With BGP sharding enabled, triggering route resolution of an indirect next-hop (e.g., an IGP route change over which a BGP route gets resolved), may cause rpd to crash and restart. An attacker causing continuous IGP route churn, resulting in repeated route re-resolution, will increase the likelihood of triggering this issue, leading to a potentially extended DoS condition. This issue affects: Junos OS: * all versions before 21.4R3-S6,  * from 22.1 before 22.1R3-S6,  * from 22.2 before 22.2R3-S3,  * from 22.3 before 22.3R3-S3,  * from 22.4 before 22.4R3,  * from 23.2 before 23.2R2;  Junos OS Evolved:  * all versions before 22.3R3-S3-EVO,  * from 22.4 before 22.4R3-EVO,  * from 23.2 before 23.2R2-EVO. Versions before Junos OS 21.3R1 and Junos OS Evolved 21.3R1-EVO are unaffected by this issue.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to cause impact to confidentiality and availability. When an output firewall filter is configured with one or more terms where the action is 'reject', packets matching these terms are erroneously sent to the Routing Engine (RE) and further processed there. Processing of these packets will consume limited RE resources. Also responses from the RE back to the source of this traffic could reveal confidential information about the affected device. This issue only applies to firewall filters applied to WAN or revenue interfaces, so not the mgmt or lo0 interface of the routing-engine, nor any input filters. This issue affects Junos OS Evolved on PTX Series: * all versions before 22.4R3-EVO, * 23.2 versions before 23.2R2-EVO.

An Origin Validation Error vulnerability in an insufficient protected file of Juniper Networks Junos OS on EX4600 Series and QFX5000 Series allows an unauthenticated attacker with physical access to the device to create a backdoor which allows complete control of the system. When a device isn't configured with a root password, an attacker can modify a specific file. It's contents will be added to the Junos configuration of the device without being visible. This allows for the addition of any configuration unknown to the actual operator, which includes users, IP addresses and other configuration which could allow unauthorized access to the device. This exploit is persistent across reboots and even zeroization. The indicator of compromise is a modified /etc/config/<platform>-defaults[-flex].conf file. Review that file for unexpected configuration statements, or compare it to an unmodified version which can be extracted from the original Juniper software image file. For details on the extraction procedure please contact Juniper Technical Assistance Center (JTAC). To restore the device to a trusted initial configuration the system needs to be reinstalled from physical media.  This issue affects Junos OS on EX4600 Series and QFX5000 Series: * All versions before 21.4R3, * 22.2 versions before 22.2R3-S3.

An issue WebKul Bagisto v.2.3.6 allows a remote attacker to execute arbitrary code via the Cart/Checkout API endpoint, specifically, the price calculation logic fails to validate quantity inputs properly.

An Uncontrolled Resource Consumption vulnerability in the Connectivity Fault Management (CFM) daemon and the Connectivity Fault Management Manager (cfmman) of Juniper Networks Junos OS Evolved on PTX10001-36MR, PTX10002-36QDD, PTX10004, PTX10008, PTX10016 allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). An attacker on an adjacent device sending specific valid traffic can cause cfmd to spike the CPU to 100% and cfmman's memory to leak, eventually to cause the FPC crash and restart. Continued receipt and processes of these specific valid packets will sustain the Denial of Service (DoS) condition. An indicator of compromise is to watch for an increase in cfmman memory rising over time by issuing the following command and evaluating the RSS number. If the RSS is growing into GBs then consider restarting the device to temporarily clear memory.   user@device> show system processes node fpc<num> detail | match cfmman Example:    show system processes node fpc0 detail | match cfmman    F S UID       PID       PPID PGID   SID   C PRI NI  ADDR SZ    WCHAN   RSS     PSR STIME TTY         TIME     CMD   4 S root      15204     1    15204  15204 0 80  0   - 90802     -      113652   4  Sep25 ?           00:15:28 /usr/bin/cfmman -p /var/pfe -o -c /usr/conf/cfmman-cfg-active.xml This issue affects Junos OS Evolved on PTX10001-36MR, PTX10002-36QDD, PTX10004, PTX10008, PTX10016: * from 23.2R1-EVO before 23.2R2-S4-EVO, * from 23.4 before 23.4R2-S4-EVO, * from 24.2 before 24.2R2-EVO, * from 24.4 before 24.4R1-S2-EVO, 24.4R2-EVO. This issue does not affect Junos OS Evolved on PTX10001-36MR, PTX10002-36QDD, PTX10004, PTX10008, PTX10016 before 23.2R1-EVO.

A Buffer Copy without Checking Size of Input vulnerability in the Session Initialization Protocol (SIP) ALG of Juniper Networks Junos OS on MX Series and SRX Series allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When memory utilization is high, and specific SIP packets are received, flowd/mspmand crashes. While the system recovers automatically, the disruption can significantly impact service stability. Continuous receipt of these specific SIP packets, while high utilization is present, will cause a sustained DoS condition. The utilization is outside the attackers control, so they would not be able to deterministically exploit this. This issue affects Junos OS on SRX Series and MX Series:  * All versions before 22.4R3-S7, * from 23.2 before 23.2R2-S4, * from 23.4 before 23.4R2-S5, * from 24.2 before 24.2R2.

BBOT's gitlab module could be abused to disclose a GitLab API key to an attacker controlled server with a malicious formatted git URL.

BBOT's git_clone module could be abused to disclose a GitHub API key to an attacker controlled server with a malicious formatted git URL.

Insufficient escaping in the report scheduler within Checkmk <2.4.0p13, <2.3.0p38, <2.2.0p46 and 2.1.0 (EOL) allows authenticated attackers to define the storage location of report file pairs beyond their intended root directory.

Potential use of sensitive information in GET requests in Checkmk GmbH's Checkmk versions <2.4.0p13, <2.3.0p38, <2.2.0p46, and 2.1.0 (EOL) may cause sensitive form data to be included in URL query parameters, which may be logged in various places such as browser history or web server logs.

IBM Aspera 5.0.0 through 5.0.13.1 could disclose sensitive user information from the system to an authenticated user due to an observable discrepancy of returned data.

IBM Aspera Faspex 5.0.0 through 5.0.13.1 could allow a privileged user to cause a denial of service from improperly validated API input due to excessive resource consumption.

IBM Aspera Faspex 5.0.0 through 5.0.13.1 uses a cross-domain policy file that includes domains that should not be trusted.

The Betheme theme for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘page_title’ parameter in all versions up to, and including, 28.1.6 due to insufficient input sanitization and output escaping of theme breadcrumbs. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 5.2 prior to 18.2.8, 18.3 prior to 18.3.4, and 18.4 prior to 18.4.2 that could have allowed an authenticated attacker to create a denial of service condition by configuring malicious webhook endpoints that send crafted HTTP responses.

The Slider Revolution plugin for WordPress is vulnerable to unauthorized access and modification of data due to a missing capability check on several functions in all versions up to, and including, 6.7.37. This makes it possible for authenticated attackers, with Contributor-level access and above, to install and activate plugin add-ons, create sliders, and download arbitrary files.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: Fix incorrect retrival of acp_chip_info Use dev_get_drvdata(dev->parent) instead of dev_get_platdata(dev) to correctly obtain acp_chip_info members in the acp I2S driver. Previously, some members were not updated properly due to incorrect data access, which could potentially lead to null pointer dereferences. This issue was missed in the earlier commit ("ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot"), which only addressed set_tdm_slot(). This change ensures that all relevant functions correctly retrieve acp_chip_info, preventing further null pointer dereference issues.

In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: mp: Fix dual-divider clock rate readback When dual-divider clock support was introduced, the P divider offset was left out of the .recalc_rate readback function. This causes the clock rate to become bogus or even zero (possibly due to the P divider being 1, leading to a divide-by-zero). Fix this by incorporating the P divider offset into the calculation.

Transient DOS while processing IOCTL call for image encoding.

Information disclosure while processing batch command execution in Video driver.

Transient DOS while processing video packets received from video firmware.

Information disclosure may occur while processing the hypervisor log.

Memory corruption may occur while processing IOCTL call for DMM/WARPNCC CONFIG request.

A weakness has been identified in code-projects Online Complaint Site 1.0. Affected is an unknown function of the file /cms/admin/state.php. This manipulation of the argument state causes sql injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be exploited.

A vulnerability was detected in Tenda AC7 15.03.06.44. This vulnerability affects unknown code of the file /goform/AdvSetLanip. The manipulation of the argument lanIp results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.

The WP Go Maps (formerly WP Google Maps) plugin for WordPress is vulnerable to Cross-Site Request Forgery (CSRF) in all versions up to, and including, 9.0.46. This is due to the plugin exposing state-changing REST actions through an AJAX bridge without proper CSRF token validation, and having destructive logic reachable via GET requests with no permission_callback. This makes it possible for unauthenticated attackers to force logged-in administrators to create, update, or delete markers and geometry features via CSRF attacks, and allows anonymous users to trigger mass deletion of markers via unsafe GET requests.

A weakness has been identified in code-projects Online Complaint Site 1.0. Impacted is an unknown function of the file /cms/users/complaint-details.php. Executing manipulation of the argument cid can lead to sql injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be exploited.

A security flaw has been discovered in code-projects Online Complaint Site 1.0. This issue affects some unknown processing of the file /cms/users/register-complaint.php. Performing manipulation of the argument cid results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be exploited.

A vulnerability was identified in code-projects Online Complaint Site 1.0. This vulnerability affects unknown code of the file /cms/users/index.php. Such manipulation of the argument Username leads to sql injection. The attack may be performed from remote. The exploit is publicly available and might be used.

A vulnerability was found in code-projects Voting System 1.0. Affected by this issue is some unknown functionality of the file /admin/voters_add.php. The manipulation of the argument Firstname/Lastname/Platform results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used.