CVE Database

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

A Missing Encryption of Sensitive Data issue was discovered in PDQ Manufacturing LaserWash G5 and G5 S Series all versions, LaserWash M5, all versions, LaserWash 360 and 360 Plus, all versions, LaserWash AutoXpress and AutoExpress Plus, all versions, LaserJet, all versions, ProTouch Tandem, all versions, ProTouch ICON, all versions, and ProTouch AutoGloss, all versions. The username and password are transmitted insecurely.

An Improper Authentication issue was discovered in PDQ Manufacturing LaserWash G5 and G5 S Series all versions, LaserWash M5, all versions, LaserWash 360 and 360 Plus, all versions, LaserWash AutoXpress and AutoExpress Plus, all versions, LaserJet, all versions, ProTouch Tandem, all versions, ProTouch ICON, all versions, and ProTouch AutoGloss, all versions. The web server does not properly verify that provided authentication information is correct.

An Improper Access Control issue was discovered in Schweitzer Engineering Laboratories (SEL) SEL-3620 and SEL-3622 Security Gateway Versions R202 and, R203, R203-V1, R203-V2 and, R204, R204-V1. The device does not properly enforce access control while configured for NAT port forwarding, which may allow for unauthorized communications to downstream devices.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

The zmq3 input and output modules in rsyslog before 8.28.0 interpreted description fields as format strings, possibly allowing a format string attack with unspecified impact.

An issue was discovered in SMA Solar Technology products. The SIP implementation does not properly use authentication with encryption: it is vulnerable to replay attacks, packet injection attacks, and man in the middle attacks. An attacker is able to successfully use SIP to communicate with the device from anywhere within the LAN. An attacker may use this to crash the device, stop it from communicating with the SMA servers, exploit known SIP vulnerabilities, or find sensitive information from the SIP communications. Furthermore, because the SIP communication channel is unencrypted, an attacker capable of understanding the protocol can eavesdrop on communications. For example, passwords can be extracted. NOTE: the vendor's position is that authentication with encryption is not required on an isolated subnetwork. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

An issue was discovered in SMA Solar Technology products. An attacker can use Sunny Explorer or the SMAdata2+ network protocol to update the device firmware without ever having to authenticate. If an attacker is able to create a custom firmware version that is accepted by the inverter, the inverter is compromised completely. This allows the attacker to do nearly anything: for example, giving access to the local OS, creating a botnet, using the inverters as a stepping stone into companies, etc. NOTE: the vendor reports that this attack has always been blocked by "a final integrity and compatibility check." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

An issue was discovered in SMA Solar Technology products. The inverters make use of a weak hashing algorithm to encrypt the password for REGISTER requests. This hashing algorithm can be cracked relatively easily. An attacker will likely be able to crack the password using offline crackers. This cracked password can then be used to register at the SMA servers. NOTE: the vendor's position is that "we consider the probability of the success of such manipulation to be extremely low." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

An issue was discovered in SMA Solar Technology products. A secondary authentication system is available for Installers called the Grid Guard system. This system uses predictable codes, and a single Grid Guard code can be used on any SMA inverter. Any such code, when combined with the installer account, allows changing very sensitive parameters. NOTE: the vendor reports that Grid Guard is not an authentication feature; it is only a tracing feature. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

An issue was discovered in SMA Solar Technology products. By sniffing for specific packets on the localhost, plaintext passwords can be obtained as they are typed into Sunny Explorer by the user. These passwords can then be used to compromise the overall device. NOTE: the vendor reports that exploitation likelihood is low because these packets are usually sent only once during installation. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

An issue was discovered in SMA Solar Technology products. All inverters have a very weak password policy for the user and installer password. No complexity requirements or length requirements are set. Also, strong passwords are impossible due to a maximum of 12 characters and a limited set of characters. NOTE: the vendor reports that the 12-character limit provides "a very high security standard." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

An Incorrect Password Management issue was discovered in SMA Solar Technology products. Default passwords exist that are rarely changed. User passwords will almost always be default. Installer passwords are expected to be default or similar across installations installed by the same company (but are sometimes changed). Hidden user accounts have (at least in some cases, though more research is required to test this for all hidden user accounts) a fixed password for all devices; it can never be changed by a user. Other vulnerabilities exist that allow an attacker to get the passwords of these hidden user accounts. NOTE: the vendor reports that it has no influence on the allocation of passwords, and that global hardcoded master passwords do not exist. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

Heap-based Buffer Overflow in the psf_binheader_writef function in common.c in libsndfile through 1.0.28 allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

MaLion for Windows and Mac versions 3.2.1 to 5.2.1 uses a hardcoded cryptographic key which may allow an attacker to alter the connection settings of Terminal Agent and spoof the Relay Service.

MaLion for Windows and Mac 5.0.0 to 5.2.1 allows remote attackers to bypass authentication to alter settings in Relay Service Server.

SQL injection vulnerability in the MaLion for Windows and Mac 5.0.0 to 5.2.1 allows remote attackers to execute arbitrary SQL commands via Relay Service Server.

In shadow before 4.5, the newusers tool could be made to manipulate internal data structures in ways unintended by the authors. Malformed input may lead to crashes (with a buffer overflow or other memory corruption) or other unspecified behaviors. This crosses a privilege boundary in, for example, certain web-hosting environments in which a Control Panel allows an unprivileged user account to create subaccounts.

Zoho ManageEngine OpManager 11 through 12.2 uses a custom encryption algorithm to protect the credential used to access the monitored devices. The implemented algorithm doesn't use a per-system key or even a salt; therefore, it's possible to create a universal decryptor.

Format Factory 4.1.0 has a DLL Hijacking Vulnerability because an untrusted search path is used for msimg32.dll, WindowsCodecs.dll, and dwmapi.dll.

Proxy command injection vulnerability in Trend Micro OfficeScan 11 and XG (12) allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the T parameter within Proxy.php. Formerly ZDI-CAN-4544.

Proxy command injection vulnerability in Trend Micro OfficeScan 11 and XG (12) allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the tr parameter within Proxy.php. Formerly ZDI-CAN-4543.

Buffer overflow in ioquake3 before 2017-08-02 allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted packet.

The OnePlus 2 Primary Bootloader (PBL) does not validate the SBL1 partition before executing it, although it contains a certificate. This allows attackers with write access to that partition to disable signature validation.

Directory traversal vulnerability in Trend Micro Control Manager 6.0 allows remote code execution by attackers able to drop arbitrary files in a web-facing directory. Formerly ZDI-CAN-4684.

SQL Injection in Trend Micro Control Manager 6.0 causes Remote Code Execution when executing opcode 0x4707 due to lack of proper user input validation in cmdHandlerNewReportScheduler.dll. Formerly ZDI-CAN-4549.

SQL Injection in Trend Micro Control Manager 6.0 causes Remote Code Execution when executing opcode 0x6b1b due to lack of proper user input validation in cmdHandlerStatusMonitor.dll. Formerly ZDI-CAN-4545.

SQL Injection in Trend Micro Control Manager 6.0 causes Remote Code Execution when executing opcode 0x3b21 due to lack of proper user input validation in mdHandlerLicenseManager.dll. Formerly ZDI-CAN-4561.

SQL Injection in Trend Micro Control Manager 6.0 causes Remote Code Execution when executing opcode 0x1b07 due to lack of proper user input validation in cmdHandlerTVCSCommander.dll. Formerly ZDI-CAN-4560.

A specially crafted IOCTL can be issued to the rzpnk.sys driver in Razer Synapse 2.20.15.1104 that is forwarded to ZwOpenProcess allowing a handle to be opened to an arbitrary process.