CVE Database

A vulnerability was found in Alaga Home Security WiFi Camera 3K (model S-CW2503C-H) with hardware version V03 and firmware version 1.4.2, which allows physical attackers to execute commands as root via script file with a specific name on a SD card.

Dell Alienware Command Center 6.x (AWCC), versions prior to 6.10.15.0, contains an Insecure Temporary File vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information tampering.

Dell Alienware Command Center 6.x (AWCC), versions prior to 6.10.15.0, contain an Improper Access Control vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Tampering.

An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetNetworkSettings' functionality of prog.cgi, where the 'IPAddress' and 'SubnetMask' parameters are directly concatenated into shell commands executed via system(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.

A command injection vulnerability exists in the D-Link DIR-823G router firmware DIR823G_V1.0.2B05_20181207.bin in the timelycheck and sysconf binaries, which process the /tmp/new_qos.rule configuration file. The vulnerability occurs because parsed fields from the configuration file are concatenated into command strings and executed via system() without any sanitization. An attacker with write access to /tmp/new_qos.rule can execute arbitrary commands on the device.

A stack buffer overflow vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin in the rc binary's USB storage handling module. The vulnerability occurs when the "Serial Number" field from a USB device is read via sscanf into a 64-byte stack buffer, while fgets reads up to 127 bytes, causing a stack overflow. An attacker with physical access or control over a USB device can exploit this vulnerability to potentially execute arbitrary code on the device.

An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDMZSettings' functionality, where the 'IPAddress' parameter in prog.cgi is stored in NVRAM and later used by librcm.so to construct iptables commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.

An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDynamicDNSSettings' functionality, where the 'ServerAddress' and 'Hostname' parameters in prog.cgi are stored in NVRAM and later used by rc to construct system commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.

A flaw has been found in AMTT Hotel Broadband Operation System 1.0. The impacted element is an unknown function of the file /user/portal/get_firstdate.php. Executing manipulation of the argument uid can lead to sql injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Typebot is an open-source chatbot builder. In version 3.9.0 up to but excluding version 3.13.0, an Insecure Direct Object Reference (IDOR) vulnerability exists in the API token management endpoint. An authenticated attacker can delete any user's API token and retrieve its value by simply knowing the target user's ID and token ID, without requiring authorization checks. Version 3.13.0 fixes the issue.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_433188` function in `prog.cgi` stores user-supplied email configuration parameters (`EmailFrom`, `EmailTo`, `SMTPServerAddress`, `SMTPServerPort`, `AccountName`) in NVRAM via `nvram_safe_set`. These values are later retrieved in the `sub_448FDC` function of `rc` using `nvram_safe_get` and concatenated into shell commands executed via `twsystem()` without sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `librcm.so` binaries. The `sub_4455BC` function in `prog.cgi` stores user-supplied `SetDMZSettings/IPAddress` values in NVRAM via `nvram_safe_set("dmz_ipaddr", ...)`. These values are later retrieved in the `DMZ_run` function of `librcm.so` using `nvram_safe_get` and concatenated into `iptables` shell commands executed via `twsystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.

A stack-based buffer overflow exists in the get_merge_mac function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to six user-supplied CGI parameters matching <parameter>_0~5 into a fixed-size buffer (a2) without proper bounds checking, appending colon delimiters during concatenation. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

A command injection vulnerability exists in the D-Link DIR-823G router firmware DIR823G_V1.0.2B05_20181207.bin in the timelycheck and sysconf binaries, which process the /var/system/linux_vlan_reinit file. The vulnerability occurs because content read from this file is only partially validated for a prefix and then formatted using vsnprintf() before being executed with system(), allowing an attacker with write access to /var/system/linux_vlan_reinit to execute arbitrary commands on the device.

Mattermost Mobile Apps versions <=2.32.0 fail to verify that SSO redirect tokens originate from the trusted server, which allows a malicious Mattermost instance or on-path attacker to obtain user session credentials via crafted token-in-URL responses

Certain HP LaserJet Pro printers may be vulnerable to information disclosure leading to credential exposure by altering the scan/send destination address and/or modifying the LDAP Server.

A stack-based buffer overflow vulnerability exists in the mtk_dut binary of Linksys E7350 routers (Firmware 1.1.00.032). The function sub_4045A8 reads up to 256 bytes from /sys/class/net/%s/address into a local buffer and then copies it into caller-provided buffer a1 using strcpy without boundary checks. Since a1 is often allocated with significantly smaller sizes (20-32 bytes), local attackers controlling the contents of /sys/class/net/%s/address can trigger buffer overflows, leading to memory corruption, denial of service, or potential arbitrary code execution.

A vulnerability in the web-based management interface of Cisco Catalyst Center Virtual Appliance could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. This vulnerability is due to improper input validation of HTTP request parameters. An attacker could exploit this vulnerability by intercepting and modifying an HTTP request from a user. A successful exploit could allow the attacker to redirect the user to a malicious web page.

A vulnerability in the web-based management interface of Cisco Catalyst Center could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of an affected device. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of the web-based management interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.

A vulnerability in the REST API of Cisco Catalyst Center could allow an authenticated, remote attacker to execute arbitrary commands in a restricted container as the root user. This vulnerability is due to insufficient validation of user-supplied input in REST API request parameters. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to inject arbitrary commands that would then be executed in a restricted container with root privileges. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer.

A vulnerability in Cisco Catalyst Center could allow an authenticated, remote attacker to execute operations that should require Administrator privileges. The attacker would need valid read-only user credentials. This vulnerability is due to improper role-based access control (RBAC). An attacker could exploit this vulnerability by logging in to an affected system and modifying certain policy configurations. A successful exploit could allow the attacker to modify policy configurations that are reserved for the Administrator role. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer.

A vulnerability exists in Keycloak's server distribution where enabling debug mode (--debug <port>) insecurely defaults to binding the Java Debug Wire Protocol (JDWP) port to all network interfaces (0.0.0.0). This exposes the debug port to the local network, allowing an attacker on the same network segment to attach a remote debugger and achieve remote code execution within the Keycloak Java virtual machine.

js-yaml is a JavaScript YAML parser and dumper. In js-yaml before 4.1.1 and 3.14.2, it's possible for an attacker to modify the prototype of the result of a parsed yaml document via prototype pollution (`__proto__`). All users who parse untrusted yaml documents may be impacted. The problem is patched in js-yaml 4.1.1 and 3.14.2. Users can protect against this kind of attack on the server by using `node --disable-proto=delete` or `deno` (in Deno, pollution protection is on by default).

PrivateBin is an online pastebin where the server has zero knowledge of pasted data. Starting in version 1.7.7 and prior to version 2.0.3, an unauthenticated Local File Inclusion exists in the template-switching feature. If `templateselection` is enabled in the configuration, the server trusts the `template` cookie and includes the referenced PHP file. An attacker can read sensitive data or, if they manage to drop a PHP file elsewhere, gain remote code execution. The constructed path of the template file is checked for existence, then included. For PrivateBin project files this does not leak any secrets due to data files being created with PHP code that prevents execution, but if a configuration file without that line got created or the visitor figures out the relative path to a PHP script that directly performs an action without appropriate privilege checking, those might execute or leak information. The issue has been patched in version 2.0.3. As a workaround, set `templateselection = false` (which is the default) in `cfg/conf.php` or remove it entirely

MaxKB is an open-source AI assistant for enterprise. In versions prior to 2.3.1, a user can get sensitive informations by Python code in tool module, although the process run in sandbox. Version 2.3.1 fixes the issue.

Astro is a web framework. In Astro versions 2.16.0 up to but excluding 5.15.5 which utilizeon-demand rendering, request headers `x-forwarded-proto` and `x-forwarded-port` are insecurely used, without sanitization, to build the URL. This has several consequences, the most important of which are: middleware-based protected route bypass (only via `x-forwarded-proto`), DoS via cache poisoning (if a CDN is present), SSRF (only via `x-forwarded-proto`), URL pollution (potential SXSS, if a CDN is present), and WAF bypass. Version 5.15.5 contains a patch.

An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication.

A stack buffer overflow vulnerability exists in the ToToLink LR1200GB (V9.1.0u.6619_B20230130) and NR1800X (V9.1.0u.6681_B20230703) Router firmware within the cstecgi.cgi binary (setDefResponse function). The binary reads the "IpAddress" parameter from a web request and copies it into a fixed-size stack buffer using strcpy() without any length validation. Maliciously crafted input can overflow the buffer, leading to potential arbitrary code execution or memory corruption, without requiring authentication.

An unauthenticated command injection vulnerability exists in the ToToLink LR1200GB Router firmware V9.1.0u.6619_B20230130 within the cstecgi.cgi binary (sub_41EC68 function). The binary reads the "imei" parameter from a web request and verifies only that it is 15 characters long. The parameter is then directly inserted into a system command using sprintf() and executed with system(). Maliciously crafted IMEI input can execute arbitrary commands on the router without authentication.

A local stack-based buffer overflow vulnerability exists in the infostat.cgi and cstecgi.cgi binaries of ToToLink routers (A720R V4.1.5cu.614_B20230630, LR1200GB V9.1.0u.6619_B20230130, and NR1800X V9.1.0u.6681_B20230703). Both programs parse the contents of /proc/net/arp using sscanf() with "%s" format specifiers into fixed-size stack buffers without length validation. Specifically, one function writes user-controlled data into a single-byte buffer, and the other into adjacent small arrays without bounds checking. An attacker who controls the contents of /proc/net/arp can trigger memory corruption, leading to denial of service or potential arbitrary code execution.