CVE Database

When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations.

A vulnerability in the installer component of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated local attacker to copy user-supplied files to system level directories with system level privileges. The vulnerability is due to the incorrect handling of directory paths. An attacker could exploit this vulnerability by creating a malicious file and copying the file to a system directory. An exploit could allow the attacker to copy malicious files to arbitrary locations with system level privileges. This could include DLL pre-loading, DLL hijacking, and other related attacks. To exploit this vulnerability, the attacker needs valid credentials on the Windows system.

Zimbra Collaboration Suite (ZCS) before 8.8.15 Patch 7 allows SSRF when WebEx zimlet is installed and zimlet JSP is enabled.

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka 'Microsoft Exchange Memory Corruption Vulnerability'.

An elevation of privilege vulnerability exists in the Windows Installer when MSI packages process symbolic links, aka 'Windows Installer Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2020-0686.

A remote code execution vulnerability exists in the way that the scripting engine handles objects in memory in Internet Explorer, aka 'Scripting Engine Memory Corruption Vulnerability'. This CVE ID is unique from CVE-2020-0673, CVE-2020-0710, CVE-2020-0711, CVE-2020-0712, CVE-2020-0713, CVE-2020-0767.

A remote code execution vulnerability exists in Microsoft SQL Server Reporting Services when it incorrectly handles page requests, aka 'Microsoft SQL Server Reporting Services Remote Code Execution Vulnerability'.

Netis WF2419 is vulnerable to authenticated Remote Code Execution (RCE) as root through the router Web management page. The vulnerability has been found in firmware version V1.2.31805 and V2.2.36123. After one is connected to this page, it is possible to execute system commands as root through the tracert diagnostic tool because of lack of user input sanitizing.

TeamViewer Desktop through 14.7.1965 allows a bypass of remote-login access control because the same key is used for different customers' installations. It used a shared AES key for all installations since at least as far back as v7.0.43148, and used it for at least OptionsPasswordAES in the current version of the product. If an attacker were to know this key, they could decrypt protect information stored in the registry or configuration files of TeamViewer. With versions before v9.x , this allowed for attackers to decrypt the Unattended Access password to the system (which allows for remote login to the system as well as headless file browsing). The latest version still uses the same key for OptionPasswordAES but appears to have changed how the Unattended Access password is stored. While in most cases an attacker requires an existing session on a system, if the registry/configuration keys were stored off of the machine (such as in a file share or online), an attacker could then decrypt the required password to login to the system.

An issue was discovered in EyesOfNetwork 5.3. The sudoers configuration is prone to a privilege escalation vulnerability, allowing the apache user to run arbitrary commands as root via a crafted NSE script for nmap 7.

An issue was discovered in EyesOfNetwork 5.3. The installation uses the same API key (hardcoded as EONAPI_KEY in include/api_functions.php for API version 2.4.2) by default for all installations, hence allowing an attacker to calculate/guess the admin access token.

PlaySMS before 1.4.3 does not sanitize inputs from a malicious string.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability is due to improper validation of string input from certain fields in Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

DrayTek Vigor2960 1.3.1_Beta, Vigor3900 1.4.4_Beta, and Vigor300B 1.3.3_Beta, 1.4.2.1_Beta, and 1.4.4_Beta devices allow remote code execution as root (without authentication) via shell metacharacters to the cgi-bin/mainfunction.cgi URI. This issue has been fixed in Vigor3900/2960/300B v1.5.1.

smtp_mailaddr in smtp_session.c in OpenSMTPD 6.6, as used in OpenBSD 6.6 and other products, allows remote attackers to execute arbitrary commands as root via a crafted SMTP session, as demonstrated by shell metacharacters in a MAIL FROM field. This affects the "uncommented" default configuration. The issue exists because of an incorrect return value upon failure of input validation.

A vulnerability in WhatsApp Desktop versions prior to 0.3.9309 when paired with WhatsApp for iPhone versions prior to 2.20.10 allows cross-site scripting and local file reading. Exploiting the vulnerability requires the victim to click a link preview from a specially crafted text message.

Vulnerability in the Oracle Coherence product of Oracle Fusion Middleware (component: Caching,CacheStore,Invocation). Supported versions that are affected are 3.7.1.0, 12.1.3.0.0, 12.2.1.3.0 and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via T3 to compromise Oracle Coherence. Successful attacks of this vulnerability can result in takeover of Oracle Coherence. CVSS 3.0 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: WLS Core Components). Supported versions that are affected are 10.3.6.0.0, 12.1.3.0.0, 12.2.1.3.0 and 12.2.1.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via IIOP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.0 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

A remote code execution vulnerability exists when the Microsoft .NET Framework fails to validate input properly, aka '.NET Framework Remote Code Execution Injection Vulnerability'.

An elevation of privilege vulnerability exists in the way the Update Notification Manager handles files.To exploit this vulnerability, an attacker would first have to gain execution on the victim system, aka 'Update Notification Manager Elevation of Privilege Vulnerability'.

A spoofing vulnerability exists in the way Windows CryptoAPI (Crypt32.dll) validates Elliptic Curve Cryptography (ECC) certificates.An attacker could exploit the vulnerability by using a spoofed code-signing certificate to sign a malicious executable, making it appear the file was from a trusted, legitimate source, aka 'Windows CryptoAPI Spoofing Vulnerability'.

The UPnP endpoint URL /gena.cgi in the D-Link DIR-859 Wi-Fi router 1.05 and 1.06B01 Beta01 allows an Unauthenticated remote attacker to execute system commands as root, by sending a specially crafted HTTP SUBSCRIBE request to the UPnP service when connecting to the local network.

Apache Solr 5.0.0 to Apache Solr 8.3.1 are vulnerable to a Remote Code Execution through the VelocityResponseWriter. A Velocity template can be provided through Velocity templates in a configset `velocity/` directory or as a parameter. A user defined configset could contain renderable, potentially malicious, templates. Parameter provided templates are disabled by default, but can be enabled by setting `params.resource.loader.enabled` by defining a response writer with that setting set to `true`. Defining a response writer requires configuration API access. Solr 8.4 removed the params resource loader entirely, and only enables the configset-provided template rendering when the configset is `trusted` (has been uploaded by an authenticated user).

TVT NVMS-1000 devices allow GET /.. Directory Traversal

An issue was discovered in Citrix Application Delivery Controller (ADC) and Gateway 10.5, 11.1, 12.0, 12.1, and 13.0. They allow Directory Traversal.

mongo-express before 0.54.0 is vulnerable to Remote Code Execution via endpoints that uses the `toBSON` method. A misuse of the `vm` dependency to perform `exec` commands in a non-safe environment.

In SonicWall SMA100, an unauthenticated Directory Traversal vulnerability in the handleWAFRedirect CGI allows the user to test for the presence of a file on the server.

A use after free issue was addressed with improved memory management. This issue is fixed in iOS 12.3, macOS Mojave 10.14.5, tvOS 12.3, watchOS 5.2.1. A malicious application may be able to execute arbitrary code with system privileges.

A use after free issue was addressed with improved memory management. This issue is fixed in macOS Mojave 10.14.4. An application may be able to gain elevated privileges.

A type confusion issue was addressed with improved memory handling. This issue is fixed in iOS 12.2, tvOS 12.2, watchOS 5.2, Safari 12.1, iTunes 12.9.4 for Windows, iCloud for Windows 7.11. Processing maliciously crafted web content may lead to arbitrary code execution.